[PATCH 0/6] Add TI PRUSS platform driver

[Pavel Machek]

On Sun 2020-08-02 13:53:30, Pavel Machek wrote:
> Hi!
> 
> > A typical usage scenario would be to load the application firmware into one or
> > more of the PRU cores, initialize one or more of the peripherals and perform I/O
> > through shared RAM from either a kernel driver or directly from userspace.
> > 
> > This series contains the PRUSS platform driver. This is the parent driver for
> > the entire PRUSS and is used for managing the subsystem level resources like
> > various memories and the CFG module.  It is responsible for the creation and
> > deletion of the platform devices for the child PRU devices and other child
> > devices (like Interrupt Controller, MDIO node and some syscon nodes) so that
> > they can be managed by specific platform drivers.
> 
> >  drivers/soc/ti/Kconfig | 11 + drivers/soc/ti/Makefile | 1 + drivers/soc/ti/pruss.c | 
> 
> Is drivers/soc right place for that? We already have subsystem for various
> programmable accelerators...

....see drivers/remoteproc.
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html