[PATCH v3 6/6] arm64: dts: add LX2160ARDB board support

Li Yang leoyang.li at nxp.com
Fri Sep 28 12:37:15 PDT 2018


On Mon, Sep 24, 2018 at 7:51 AM Vabhav Sharma <vabhav.sharma at nxp.com> wrote:
>
> LX2160A reference design board (RDB) is a high-performance
> computing, evaluation, and development platform with LX2160A
> SoC.

Please send next version with Shawn Guo and me in the "to" recipient
so that its less likely we will miss it.

>
> Signed-off-by: Priyanka Jain <priyanka.jain at nxp.com>
> Signed-off-by: Sriram Dash <sriram.dash at nxp.com>
> Signed-off-by: Vabhav Sharma <vabhav.sharma at nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/Makefile            |  1 +
>  arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 88 +++++++++++++++++++++++
>  2 files changed, 89 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 86e18ad..445b72b 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -13,3 +13,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
>  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
>  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
>  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> new file mode 100644
> index 0000000..1bbe663
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> @@ -0,0 +1,88 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +//
> +// Device Tree file for LX2160ARDB
> +//
> +// Copyright 2018 NXP
> +
> +/dts-v1/;
> +
> +#include "fsl-lx2160a.dtsi"
> +
> +/ {
> +       model = "NXP Layerscape LX2160ARDB";
> +       compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
> +
> +       chosen {
> +               stdout-path = "serial0:115200n8";
> +       };
> +};
> +
> +&uart0 {
> +       status = "okay";
> +};
> +
> +&uart1 {
> +       status = "okay";
> +};
> +
> +&i2c0 {
> +       status = "okay";
> +       i2c-mux at 77 {
> +               compatible = "nxp,pca9547";
> +               reg = <0x77>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               i2c at 2 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <0x2>;
> +
> +                       power-monitor at 40 {
> +                               compatible = "ti,ina220";
> +                               reg = <0x40>;
> +                               shunt-resistor = <1000>;
> +                       };
> +               };
> +
> +               i2c at 3 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <0x3>;
> +
> +                       temperature-sensor at 4c {
> +                               compatible = "nxp,sa56004";
> +                               reg = <0x4c>;

Need a vcc-supply property according to the binding.

> +                       };
> +
> +                       temperature-sensor at 4d {
> +                               compatible = "nxp,sa56004";
> +                               reg = <0x4d>;

Ditto.

> +                       };
> +               };
> +       };
> +};
> +
> +&i2c4 {
> +       status = "okay";
> +
> +       rtc at 51 {
> +               compatible = "nxp,pcf2129";
> +               reg = <0x51>;
> +               // IRQ10_B
> +               interrupts = <0 150 0x4>;
> +               };
> +
> +};
> +
> +&usb0 {
> +       status = "okay";
> +};
> +
> +&usb1 {
> +       status = "okay";
> +};
> +
> +&crypto {
> +       status = "okay";
> +};
> --
> 2.7.4
>



More information about the linux-arm-kernel mailing list