[PATCH v2] ARM: dts: Add support for Liebherr's BK4 device (vf610 based)

Lukasz Majewski lukma at denx.de
Thu Sep 27 15:18:31 PDT 2018


This commit adds DTS support for BK4 device from Liebherr. It
uses vf610 SoC from NXP.

Signed-off-by: Lukasz Majewski <lukma at denx.de>
---
Changes for v2:

- Rename enet_ext and audio_ext oscillator names
- Move regulators from simple-bus (and rename to reg_3p3v: regulator-3p3v)
- Add stdout-path property to chosen node
- Move iomuxc node to the end (as it is so large)
- Sort with alphabetical order
- Rename the default pinctrl to "hog"
- Move LED pins definition from "hog" to "led" group
- Add more descriptive names to default pins pinmux definition
- Use spi-slave property to describe node working in this mode
- Rename the spidev3 node to slave
- Introduce new compatible name (lwn,bk4) for spidev driver (to avoid
  confusion)
- Update some compatibles to match current kernel
---
 arch/arm/boot/dts/Makefile      |   1 +
 arch/arm/boot/dts/vf610-bk4.dts | 499 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 500 insertions(+)
 create mode 100644 arch/arm/boot/dts/vf610-bk4.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b5bd3de87c33..e6f159895fa9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -577,6 +577,7 @@ dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-twr.dtb
 dtb-$(CONFIG_SOC_VF610) += \
 	vf500-colibri-eval-v3.dtb \
+	vf610-bk4.dtb \
 	vf610-colibri-eval-v3.dtb \
 	vf610m4-colibri.dtb \
 	vf610-cosmic.dtb \
diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts
new file mode 100644
index 000000000000..78c5723d6f64
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-bk4.dts
@@ -0,0 +1,499 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma at denx.de
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "Liebherr BK4 controller";
+	compatible = "lwn,bk4", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory at 80000000 {
+		reg = <0x80000000 0x8000000>;
+	};
+
+	audio_ext: oscillator-audio {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	enet_ext: oscillator-ethernet {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		/* LED D5 */
+		led0: heartbeat {
+			label = "heartbeat";
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vcc_3v3_mcu: regulator-vcc_3v3_mcu {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&adc1 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
+	clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
+};
+
+&dspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi0>;
+	bus-num = <0>;
+	status = "okay";
+
+	spidev0 at 0 {
+		compatible = "lwn,bk4";
+		spi-max-frequency = <30000000>;
+		reg = <0>;
+		fsl,spi-cs-sck-delay = <200>;
+		fsl,spi-sck-cs-delay = <400>;
+	};
+};
+
+&dspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi3>;
+	bus-num = <3>;
+	status = "okay";
+	spi-slave;
+
+	slave at 0 {
+		compatible = "lwn,bk4";
+		spi-max-frequency = <30000000>;
+		reg = <0>;
+	};
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec0 {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethphy0: ethernet-phy at 1 {
+			reg = <1>;
+			clocks = <&clks VF610_CLK_ENET_50M>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethphy1: ethernet-phy at 1 {
+			reg = <1>;
+			clocks = <&clks VF610_CLK_ENET_50M>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom: eeprom at 50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+
+	rtc: rtc at 68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <33000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	status = "okay";
+
+	nand at 0 {
+		compatible = "fsl,vf610-nfc-nandcs";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-bus-width = <16>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <2048>;
+		nand-on-flash-bbt;
+	};
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi0>;
+	status = "okay";
+
+	flash0: n25q128a13 at 0 {
+		compatible = "n25q128a13", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <66000000>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+	};
+
+	flash1: n25q128a13 at 1 {
+		compatible = "n25q128a13", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <66000000>;
+		spi-rx-bus-width = <2>;
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbdev0 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbmisc0 {
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* One_Wire_PSU_EN */
+			VF610_PAD_PTC29__GPIO_102		0x1183
+			/* SPI ENABLE */
+			VF610_PAD_PTB26__GPIO_96		0x1183
+			/* EB control */
+			VF610_PAD_PTE14__GPIO_119		0x1183
+			VF610_PAD_PTE4__GPIO_109		0x1181
+			/* Feedback_Lines */
+			VF610_PAD_PTC31__GPIO_104		0x1181
+			VF610_PAD_PTA7__GPIO_134		0x1181
+			VF610_PAD_PTD9__GPIO_88		0x1181
+			VF610_PAD_PTE1__GPIO_106		0x1183
+			VF610_PAD_PTB2__GPIO_24		0x1181
+			VF610_PAD_PTB3__GPIO_25		0x1181
+			VF610_PAD_PTB1__GPIO_23		0x1181
+			/* SDHC Enable */
+			VF610_PAD_PTE19__GPIO_124		0x1183
+			/* SDHC Overcurrent */
+			VF610_PAD_PTB23__GPIO_93		0x1181
+			/* GPI */
+			VF610_PAD_PTE2__GPIO_107		0x1181
+			VF610_PAD_PTE3__GPIO_108		0x1181
+			VF610_PAD_PTE5__GPIO_110		0x1181
+			VF610_PAD_PTE6__GPIO_111		0x1181
+			/* GPO */
+			VF610_PAD_PTE0__GPIO_105		0x1183
+			VF610_PAD_PTE7__GPIO_112		0x1183
+			/* RS485 Control */
+			VF610_PAD_PTB8__GPIO_30		0x1183
+			VF610_PAD_PTB9__GPIO_31		0x1183
+			VF610_PAD_PTE8__GPIO_113		0x1183
+			/* MPBUS MPB_EN */
+			VF610_PAD_PTE28__GPIO_133		0x1183
+			/* MISC */
+			VF610_PAD_PTE10__GPIO_115		0x1183
+			VF610_PAD_PTE11__GPIO_116		0x1183
+			VF610_PAD_PTE17__GPIO_122		0x1183
+			VF610_PAD_PTC30__GPIO_103		0x1183
+			VF610_PAD_PTB0__GPIO_22		0x1181
+			/* RESETINFO */
+			VF610_PAD_PTE26__GPIO_131		0x1183
+			VF610_PAD_PTD6__GPIO_85		0x1181
+			VF610_PAD_PTE27__GPIO_132		0x1181
+			VF610_PAD_PTE13__GPIO_118		0x1181
+			VF610_PAD_PTE21__GPIO_126		0x1181
+			VF610_PAD_PTE22__GPIO_127		0x1181
+			/* EE_5V_EN */
+			VF610_PAD_PTE18__GPIO_123		0x1183
+			/* EE_5V_OC_N */
+			VF610_PAD_PTE25__GPIO_130		0x1181
+		>;
+	};
+
+	pinctrl_can0: can0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__CAN0_RX		0x1181
+			VF610_PAD_PTB15__CAN0_TX		0x1182
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__CAN1_RX		0x1181
+			VF610_PAD_PTB17__CAN1_TX		0x1182
+		>;
+	};
+
+	pinctrl_dspi0: dspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTB18__DSPI0_CS1		0x1182
+			VF610_PAD_PTB19__DSPI0_CS0		0x1182
+			VF610_PAD_PTB20__DSPI0_SIN		0x1181
+			VF610_PAD_PTB21__DSPI0_SOUT		0x1182
+			VF610_PAD_PTB22__DSPI0_SCK		0x1182
+		>;
+	};
+
+	pinctrl_dspi3: dspi3grp {
+		fsl,pins = <
+			VF610_PAD_PTD10__DSPI3_CS0		0x1181
+			VF610_PAD_PTD11__DSPI3_SIN		0x1181
+			VF610_PAD_PTD12__DSPI3_SOUT		0x1182
+			VF610_PAD_PTD13__DSPI3_SCK		0x1181
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+			VF610_PAD_PTB28__GPIO_98		0x219d
+		>;
+	};
+
+	pinctrl_fec0: fec0grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30dd
+			VF610_PAD_PTC0__ENET_RMII0_MDC		0x30de
+			VF610_PAD_PTC1__ENET_RMII0_MDIO	0x30df
+			VF610_PAD_PTC2__ENET_RMII0_CRS		0x30dd
+			VF610_PAD_PTC3__ENET_RMII0_RXD1	0x30dd
+			VF610_PAD_PTC4__ENET_RMII0_RXD0	0x30dd
+			VF610_PAD_PTC5__ENET_RMII0_RXER	0x30dd
+			VF610_PAD_PTC6__ENET_RMII0_TXD1	0x30de
+			VF610_PAD_PTC7__ENET_RMII0_TXD0	0x30de
+			VF610_PAD_PTC8__ENET_RMII0_TXEN	0x30de
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30de
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30df
+			VF610_PAD_PTC11__ENET_RMII1_CRS	0x30dd
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30dd
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30dd
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30dd
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30de
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30de
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30de
+		>;
+	};
+
+	pinctrl_gpio_leds: gpio_leds {
+		fsl,pins = <
+			/* Heart bit LED */
+			VF610_PAD_PTE12__GPIO_117	0x1183
+			/* LEDS */
+			VF610_PAD_PTE15__GPIO_120	0x1183
+			VF610_PAD_PTA12__GPIO_5	0x1183
+			VF610_PAD_PTA16__GPIO_6	0x1183
+			VF610_PAD_PTE9__GPIO_114	0x1183
+			VF610_PAD_PTE20__GPIO_125	0x1183
+			VF610_PAD_PTE23__GPIO_128	0x1183
+			VF610_PAD_PTE16__GPIO_121	0x1183
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			VF610_PAD_PTA22__I2C2_SCL               0x34df
+			VF610_PAD_PTA23__I2C2_SDA               0x34df
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			VF610_PAD_PTD23__NF_IO7		0x28df
+			VF610_PAD_PTD22__NF_IO6		0x28df
+			VF610_PAD_PTD21__NF_IO5		0x28df
+			VF610_PAD_PTD20__NF_IO4		0x28df
+			VF610_PAD_PTD19__NF_IO3		0x28df
+			VF610_PAD_PTD18__NF_IO2		0x28df
+			VF610_PAD_PTD17__NF_IO1		0x28df
+			VF610_PAD_PTD16__NF_IO0		0x28df
+			VF610_PAD_PTB24__NF_WE_B		0x28c2
+			VF610_PAD_PTB25__NF_CE0_B		0x28c2
+			VF610_PAD_PTB27__NF_RE_B		0x28c2
+			VF610_PAD_PTC26__NF_RB_B		0x283d
+			VF610_PAD_PTC27__NF_ALE		0x28c2
+			VF610_PAD_PTC28__NF_CLE		0x28c2
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB4__UART1_TX		0x21a2
+			VF610_PAD_PTB5__UART1_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTB6__UART2_TX		0x21a2
+			VF610_PAD_PTB7__UART2_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			VF610_PAD_PTA20__UART3_TX		0x21a2
+			VF610_PAD_PTA21__UART3_RX		0x21a1
+		>;
+	};
+
+	pinctrl_qspi0: qspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTD0__QSPI0_A_QSCK	0x397f
+			VF610_PAD_PTD1__QSPI0_A_CS0	0x397f
+			VF610_PAD_PTD2__QSPI0_A_DATA3	0x397f
+			VF610_PAD_PTD3__QSPI0_A_DATA2	0x397f
+			VF610_PAD_PTD4__QSPI0_A_DATA1	0x397f
+			VF610_PAD_PTD5__QSPI0_A_DATA0	0x397f
+			VF610_PAD_PTD7__QSPI0_B_QSCK	0x397f
+			VF610_PAD_PTD8__QSPI0_B_CS0	0x397f
+			VF610_PAD_PTD11__QSPI0_B_DATA1	0x397f
+			VF610_PAD_PTD12__QSPI0_B_DATA0	0x397f
+		>;
+	};
+};
-- 
2.11.0




More information about the linux-arm-kernel mailing list