[PATCH v2 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel
thierry.reding at gmail.com
Thu Sep 27 05:22:01 PDT 2018
On Fri, Sep 07, 2018 at 12:19:46PM +0800, Chen-Yu Tsai wrote:
> This panel is marketed as Banana Pi 7" LCD display. On the back is
> a sticker denoting the model name S070WV20-CT16.
> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
> However the panel only does 262k colors.
> Depending on the variant, the PCB attached to the panel module either
> supports DSI, or DSI + 24-bit RGB. DSI is converted to 24-bit RGB via
> an onboard ICN6211 MIPI DSI - RGB bridge chip, then fed to the panel
> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> .../display/panel/bananapi,s070wv20-ct16.txt | 12 +++++++++
> drivers/gpu/drm/panel/panel-simple.c | 25 +++++++++++++++++++
> 2 files changed, 37 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
Next time, please make the bindings and driver changes separate patches.
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 833 bytes
Desc: not available
More information about the linux-arm-kernel