[PATCH v2 1/2] iio: adc: at91: fix acking DRDY irq on simple conversions

Ludovic Desroches ludovic.desroches at microchip.com
Tue Sep 25 06:17:39 PDT 2018


On Mon, Sep 24, 2018 at 10:51:43AM +0300, Eugen Hristev wrote:
> When doing simple conversions, the driver did not acknowledge the DRDY irq.
> If this irq status is not acked, it will be left pending, and as soon as a
> trigger is enabled, the irq handler will be called, it doesn't know why
> this status has occurred because no channel is pending, and then it will go
> int a irq loop and board will hang.
> To avoid this situation, read the LCDR after a raw conversion is done.
> 
> Fixes 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
> Cc: Maxime Ripard <maxime.ripard at bootlin.com>
> Signed-off-by: Eugen Hristev <eugen.hristev at microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches at microchip.com> 

> ---
> Hello Jonathan,
> 
> I moved this LCDR read/acknowledge into the IRQ handler after the conversion
> value is being read.
> Sorry about the noise to stable at vger, removed from message.
> 
> Thanks,
> Eugen
> 
>  drivers/iio/adc/at91_adc.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
> index 44b5168..e3be88e 100644
> --- a/drivers/iio/adc/at91_adc.c
> +++ b/drivers/iio/adc/at91_adc.c
> @@ -279,6 +279,8 @@ static void handle_adc_eoc_trigger(int irq, struct iio_dev *idev)
>  		iio_trigger_poll(idev->trig);
>  	} else {
>  		st->last_value = at91_adc_readl(st, AT91_ADC_CHAN(st, st->chnb));
> +		/* Needed to ACK the DRDY interruption */
> +		at91_adc_readl(st, AT91_ADC_LCDR);
>  		st->done = true;
>  		wake_up_interruptible(&st->wq_data_avail);
>  	}
> -- 
> 2.7.4
> 



More information about the linux-arm-kernel mailing list