[PATCH V2 02/27] mmc: mmci: internalize dma_inprogress into mmci dma functions

Ulf Hansson ulf.hansson at linaro.org
Thu Sep 20 10:56:07 PDT 2018


On 18 September 2018 at 12:55, Ludovic Barre <ludovic.Barre at st.com> wrote:
> From: Ludovic Barre <ludovic.barre at st.com>
>
> This patch internalizes the dma_inprogress into mmci dma interfaces.
> This allows to simplify and prepare the next dma callbacks
> for mmci host ops. __dma_inprogress is called in mmci_dma_data_error
> and mmci_dma_finalize.
>
> Signed-off-by: Ludovic Barre <ludovic.barre at st.com>
> ---
>  drivers/mmc/host/mmci.c | 16 ++++++++++------
>  drivers/mmc/host/mmci.h |  4 +---
>  2 files changed, 11 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
> index bf0bb07..7d22cb9 100644
> --- a/drivers/mmc/host/mmci.c
> +++ b/drivers/mmc/host/mmci.c
> @@ -497,6 +497,9 @@ static void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data)
>
>  static void mmci_dma_data_error(struct mmci_host *host)
>  {
> +       if (!__dma_inprogress(host))
> +               return;
> +
>         dev_err(mmc_dev(host->mmc), "error during DMA transfer!\n");
>         dmaengine_terminate_all(host->dma_current);
>         host->dma_in_progress = false;
> @@ -512,6 +515,9 @@ static void mmci_dma_finalize(struct mmci_host *host, struct mmc_data *data)
>         u32 status;
>         int i;
>
> +       if (!__dma_inprogress(dmae))
> +               return;
> +
>         /* Wait up to 1ms for the DMA to complete */
>         for (i = 0; ; i++) {
>                 status = readl(host->base + MMCISTATUS);
> @@ -903,8 +909,7 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
>                 u32 remain, success;
>
>                 /* Terminate the DMA transfer */
> -               if (dma_inprogress(host))
> -                       mmci_dma_data_error(host);
> +               mmci_dma_data_error(host);
>
>                 /*
>                  * Calculate how far we are into the transfer.  Note that
> @@ -942,8 +947,8 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
>                 dev_err(mmc_dev(host->mmc), "stray MCI_DATABLOCKEND interrupt\n");
>
>         if (status & MCI_DATAEND || data->error) {
> -               if (dma_inprogress(host))
> -                       mmci_dma_finalize(host, data);
> +               mmci_dma_finalize(host, data);
> +
>                 mmci_stop_data(host);
>
>                 if (!data->error)
> @@ -1050,8 +1055,7 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
>         if ((!sbc && !cmd->data) || cmd->error) {
>                 if (host->data) {
>                         /* Terminate the DMA transfer */
> -                       if (dma_inprogress(host))
> -                               mmci_dma_data_error(host);
> +                       mmci_dma_data_error(host);
>
>                         mmci_stop_data(host);
>                 }
> diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
> index 696a066..f1ec066 100644
> --- a/drivers/mmc/host/mmci.h
> +++ b/drivers/mmc/host/mmci.h
> @@ -332,9 +332,7 @@ struct mmci_host {
>         struct mmci_host_next   next_data;
>         bool                    dma_in_progress;
>
> -#define dma_inprogress(host)   ((host)->dma_in_progress)
> -#else
> -#define dma_inprogress(host)   (0)
> +#define __dma_inprogress(host) ((host)->dma_in_progress)

Overall the change makes good sense to me, however I don't get why you
want to rename the macro-function. Please don't.

>  #endif
>  };
>
> --
> 2.7.4
>

Kind regards
Uffe



More information about the linux-arm-kernel mailing list