[PATCH 0/4] Add HiSilicon Hi3670 SoC and HiKey970 board

Wei Xu xuwei5 at hisilicon.com
Wed Sep 19 08:32:15 PDT 2018


Hi Manivannan,

On 2018/8/10 18:53, Manivannan Sadhasivam wrote:
> This patchset adds support for Hi3670 SoC and HiKey970 board. Hi3670 SoC
> is very similar to the Hi3660 SoC with additional NPU support. For now,
> only UART6 has been enabled which is configured by the bootloader for
> console support.
> 
> HiKey970 board is one of the 96Boards Consumer Edition and AI platform
> based on the Hi3670 SoC.
> 
> With this patchset, the Hikey970 board is able to boot into ramdisk with
> 8 cores.
> 
> Thanks,
> Mani
> 
> Manivannan Sadhasivam (4):
>   dt-bindings: arm: hisilicon: Add binding for Hi3670 SoC
>   arm64: dts: Add devicetree for Hisilicon Hi3670 SoC
>   dt-bindings: arm: hisilicon: Add binding for HiKey970 board
>   arm64: dts: Add devicetree support for HiKey970 board
> 
>  .../bindings/arm/hisilicon/hisilicon.txt      |   8 +
>  arch/arm64/boot/dts/hisilicon/Makefile        |   1 +
>  .../boot/dts/hisilicon/hi3670-hikey970.dts    |  35 ++++
>  arch/arm64/boot/dts/hisilicon/hi3670.dtsi     | 162 ++++++++++++++++++
>  4 files changed, 206 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
>  create mode 100644 arch/arm64/boot/dts/hisilicon/hi3670.dtsi
> 

Thanks!
Fine to me and applied the series to the hisilicon dts tree.

Best Regards,
Wei




More information about the linux-arm-kernel mailing list