[PATCH v3] ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Pro

Alex Gonzalez alex.gonzalez at digi.com
Mon Sep 10 02:37:51 PDT 2018

This patch adds a device tree for the ConnectCore 6UL SBC Pro board, based on
the ConnectCore 6UL SOM.

Changes since v2 [2]:

* Removed redundant clocks from pwm nodes
* Use real iomux pad values
* Spelling change in regulator-usb-otg1 node name

Changes since v1 [1]:

* Removed unused pinctrl nodes
* Replace undocumented vendor BSP node by using GPIO hogs
* Formatting changes:
        * Change node names to use dashes instead of underscores

[1] https://lore.kernel.org/lkml/1534936719-13770-2-git-send-email-alex.gonzalez@digi.com/
[2] https://lore.kernel.org/lkml/1536074909-8654-1-git-send-email-alex.gonzalez@digi.com/

Alex Gonzalez (1):
  ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Pro

 arch/arm/boot/dts/Makefile                  |   1 +
 arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 390 ++++++++++++++++++++++++++++
 2 files changed, 391 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts

More information about the linux-arm-kernel mailing list