[PATCH v2] ARM64: dts: meson-gxbb-wetek: add ttyAML1 uart for Bluetooth

Christian Hewitt christianshewitt at gmail.com
Fri Sep 7 05:15:36 PDT 2018


This change adds the uart_A used by the brmcfmac sdio module in the
WeTek Hub and WeTek Play 2 devices. meson_uart_probe seems to mandate
an alias (without it, BT is not working) so this is also included.

Signed-off-by: Christian Hewitt <christianshewitt at gmail.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index 70325b2..e75ace7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -10,6 +10,7 @@
 / {
 	aliases {
 		serial0 = &uart_AO;
+		serial1 = &uart_A;
 		ethernet0 = ðmac;
 	};
 
@@ -239,6 +240,18 @@
 	vqmmc-supply = <&vddio_boot>;
 };
 
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 /* This UART is brought out to the DB9 connector */
 &uart_AO {
 	status = "okay";
-- 
2.7.4




More information about the linux-arm-kernel mailing list