[PATCH 1/3] ARM: dts: stm32: add STM32 SPI support on stm32mp157c

[Amelie Delaunay]

This patch adds all STM32 SPI instances on stm32mp157c.

Signed-off-by: Amelie Delaunay <amelie.delaunay at st.com>
---
 arch/arm/boot/dts/stm32mp157c.dtsi | 84 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 84 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index b66f673..49ce7f0 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -311,6 +311,34 @@
 			};
 		};
 
+		spi2: spi at 4000b000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x4000b000 0x400>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI2_K>;
+			resets = <&rcc SPI2_R>;
+			dmas = <&dmamux1 39 0x400 0x05>,
+			       <&dmamux1 40 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi3: spi at 4000c000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x4000c000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI3_K>;
+			resets = <&rcc SPI3_R>;
+			dmas = <&dmamux1 61 0x400 0x05>,
+			       <&dmamux1 62 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		usart2: serial at 4000e000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x4000e000 0x400>;
@@ -494,6 +522,34 @@
 			status = "disabled";
 		};
 
+		spi1: spi at 44004000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x44004000 0x400>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI1_K>;
+			resets = <&rcc SPI1_R>;
+			dmas = <&dmamux1 37 0x400 0x05>,
+			       <&dmamux1 38 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi4: spi at 44005000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x44005000 0x400>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI4_K>;
+			resets = <&rcc SPI4_R>;
+			dmas = <&dmamux1 83 0x400 0x05>,
+			       <&dmamux1 84 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		timers15: timer at 44006000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -556,6 +612,20 @@
 			};
 		};
 
+		spi5: spi at 44009000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x44009000 0x400>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI5_K>;
+			resets = <&rcc SPI5_R>;
+			dmas = <&dmamux1 85 0x400 0x05>,
+			       <&dmamux1 86 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		dma1: dma at 48000000 {
 			compatible = "st,stm32-dma";
 			reg = <0x48000000 0x400>;
@@ -805,6 +875,20 @@
 			status = "disabled";
 		};
 
+		spi6: spi at 5c001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x5c001000 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI6_K>;
+			resets = <&rcc SPI6_R>;
+			dmas = <&mdma1 34 0x0 0x40008 0x0 0x0 0>,
+			       <&mdma1 35 0x0 0x40002 0x0 0x0 0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		i2c4: i2c at 5c002000 {
 			compatible = "st,stm32f7-i2c";
 			reg = <0x5c002000 0x400>;
-- 
2.7.4