[PATCH 3/3] arm64: dts: renesas: r8a7795: add ccree binding

Gilad Ben-Yossef gilad at benyossef.com
Thu May 17 06:12:23 PDT 2018


On Thu, May 17, 2018 at 12:04 PM, Simon Horman <horms at verge.net.au> wrote:
> On Thu, May 17, 2018 at 11:01:57AM +0300, Gilad Ben-Yossef wrote:
>> On Wed, May 16, 2018 at 10:43 AM, Simon Horman <horms at verge.net.au> wrote:
>> > On Tue, May 15, 2018 at 04:50:44PM +0200, Geert Uytterhoeven wrote:
>> >> Hi Gilad,
>> >>
>> >> On Tue, May 15, 2018 at 2:29 PM, Gilad Ben-Yossef <gilad at benyossef.com> wrote:
>> >> > Add bindings for CryptoCell instance in the SoC.
>> >> >
>> >> > Signed-off-by: Gilad Ben-Yossef <gilad at benyossef.com>
>> >>
>> >> Thanks for your patch!
>> >>
>> >> > --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
>> >> > +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
>> >> > @@ -528,6 +528,14 @@
>> >> >                         status = "disabled";
>> >> >                 };
>> >> >
>> >> > +               arm_cc630p: crypto at e6601000 {
>> >> > +                       compatible = "arm,cryptocell-630p-ree";
>> >> > +                       interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
>> >> > +                       #interrupt-cells = <2>;
>> >>
>> >> I believe the #interrupt-cells property is not needed.
>> >>
>> >> > +                       reg = <0x0 0xe6601000 0 0x1000>;
>> >> > +                       clocks = <&cpg CPG_MOD 229>;
>> >> > +               };
>> >>
>> >> The rest looks good, but I cannot verify the register block.
>> >>
>> >> > +
>> >> >                 i2c3: i2c at e66d0000 {
>> >> >                         #address-cells = <1>;
>> >> >                         #size-cells = <0>;
>> >
>> > Thanks, I have applied this after dropping the #interrupt-cells property.
>>
>> Thanks you!
>>
>> Alas, it will not work without the clk patch (the previous one in the
>> series) so they need to be
>> taken or dropped together.
>
> I think its fine if it does not yet work.
> But not if its causes things that previously worked to stop working.

Based on the further discussion with Geert my recommendation is to
drop my patch for now,
take Geert CR clock  patch and I will follow up next week with a v2
that fixes the clock
handing as discussed with Geert.

Many thanks,
Gilad



-- 
Gilad Ben-Yossef
Chief Coffee Drinker

"If you take a class in large-scale robotics, can you end up in a
situation where the homework eats your dog?"
 -- Jean-Baptiste Queru



More information about the linux-arm-kernel mailing list