[PATCH v2 1/3] rtc: stm32: rework register management to prepare other version of RTC

Amelie DELAUNAY amelie.delaunay at st.com
Thu May 17 03:01:49 PDT 2018


Hi,

On 05/16/2018 10:25 PM, Alexandre Belloni wrote:
> Hi,
> 
> On 09/05/2018 17:46:08+0200, Amelie Delaunay wrote:
>>   static void stm32_rtc_wpr_unlock(struct stm32_rtc *rtc)
>>   {
>> -	writel_relaxed(RTC_WPR_1ST_KEY, rtc->base + STM32_RTC_WPR);
>> -	writel_relaxed(RTC_WPR_2ND_KEY, rtc->base + STM32_RTC_WPR);
>> +	struct stm32_rtc_registers regs = rtc->data->regs;
> 
> regs should probably be a pointer to ensure that no copy is made. I've
> actually checked and it doesn't make a difference because gcc is smart
> enough to not make the copy.
> 

...

>>   static irqreturn_t stm32_rtc_alarm_irq(int irq, void *dev_id)
>>   {
>>   	struct stm32_rtc *rtc = (struct stm32_rtc *)dev_id;
>> -	unsigned int isr, cr;
>> +	struct stm32_rtc_registers regs = rtc->data->regs;
>> +	struct stm32_rtc_events evts = rtc->data->events;
> 
> Ditto for evts.
>

I prepare a v3 with const struct stm32_rtc_registers *regs and const 
struct stm32_rtc_events *evts.

>> +	unsigned int status, cr;
>>   
>>   	mutex_lock(&rtc->rtc_dev->ops_lock);
>>   
>> -	isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
>> -	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
>> +	status = readl_relaxed(rtc->base + regs.isr);
>> +	cr = readl_relaxed(rtc->base + regs.cr);
>>   
>> -	if ((isr & STM32_RTC_ISR_ALRAF) &&
>> +	if ((status & evts.alra) &&
>>   	    (cr & STM32_RTC_CR_ALRAIE)) {
>>   		/* Alarm A flag - Alarm interrupt */
>>   		dev_dbg(&rtc->rtc_dev->dev, "Alarm occurred\n");
> 
> ...
> 
>> @@ -641,7 +710,7 @@ static int stm32_rtc_probe(struct platform_device *pdev)
>>   
>>   	/*
>>   	 * After a system reset, RTC_ISR.INITS flag can be read to check if
>> -	 * the calendar has been initalized or not. INITS flag is reset by a
>> +	 * the calendar has been initialized or not. INITS flag is reset by a
>>   	 * power-on reset (no vbat, no power-supply). It is not reset if
>>   	 * rtc_ck parent clock has changed (so RTC prescalers need to be
>>   	 * changed). That's why we cannot rely on this flag to know if RTC
>> @@ -666,7 +735,7 @@ static int stm32_rtc_probe(struct platform_device *pdev)
>>   			 "alarm won't be able to wake up the system");
>>   
>>   	rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, pdev->name,
>> -			&stm32_rtc_ops, THIS_MODULE);
>> +						&stm32_rtc_ops, THIS_MODULE);
>>   	if (IS_ERR(rtc->rtc_dev)) {
>>   		ret = PTR_ERR(rtc->rtc_dev);
>>   		dev_err(&pdev->dev, "rtc device registration failed, err=%d\n",
> 
> Those two changes should go into a separate cleanup patch.
> 

OK, new patch for these two changes in v3.

Thanks for reviewing,
Amelie


More information about the linux-arm-kernel mailing list