[PATCH v2] dmaengine: qcom: bam_dma: check if the runtime pm enabled
Srinivas Kandagatla
srinivas.kandagatla at linaro.org
Thu May 17 02:42:32 PDT 2018
Disabling pm runtime at probe is not sufficient to get BAM working
on remotely controller instances. pm_runtime_get_sync() would return
-EACCES in such cases.
So check if runtime pm is enabled before returning error from bam functions.
Fixes: 5b4a68952a89 ("dmaengine: qcom: bam_dma: disable runtime pm on remote controlled")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
---
drivers/dma/qcom/bam_dma.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
index d29275b97e84..4a828c18099a 100644
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -524,6 +524,14 @@ static int bam_alloc_chan(struct dma_chan *chan)
return 0;
}
+static int bam_pm_runtime_get_sync(struct device *dev)
+{
+ if (pm_runtime_enabled(dev))
+ return pm_runtime_get_sync(dev);
+
+ return 0;
+}
+
/**
* bam_free_chan - Frees dma resources associated with specific channel
* @chan: specified channel
@@ -539,7 +547,7 @@ static void bam_free_chan(struct dma_chan *chan)
unsigned long flags;
int ret;
- ret = pm_runtime_get_sync(bdev->dev);
+ ret = bam_pm_runtime_get_sync(bdev->dev);
if (ret < 0)
return;
@@ -720,7 +728,7 @@ static int bam_pause(struct dma_chan *chan)
unsigned long flag;
int ret;
- ret = pm_runtime_get_sync(bdev->dev);
+ ret = bam_pm_runtime_get_sync(bdev->dev);
if (ret < 0)
return ret;
@@ -746,7 +754,7 @@ static int bam_resume(struct dma_chan *chan)
unsigned long flag;
int ret;
- ret = pm_runtime_get_sync(bdev->dev);
+ ret = bam_pm_runtime_get_sync(bdev->dev);
if (ret < 0)
return ret;
@@ -852,7 +860,7 @@ static irqreturn_t bam_dma_irq(int irq, void *data)
if (srcs & P_IRQ)
tasklet_schedule(&bdev->task);
- ret = pm_runtime_get_sync(bdev->dev);
+ ret = bam_pm_runtime_get_sync(bdev->dev);
if (ret < 0)
return ret;
@@ -969,7 +977,7 @@ static void bam_start_dma(struct bam_chan *bchan)
if (!vd)
return;
- ret = pm_runtime_get_sync(bdev->dev);
+ ret = bam_pm_runtime_get_sync(bdev->dev);
if (ret < 0)
return;
--
2.16.2
More information about the linux-arm-kernel
mailing list