[PATCH 2/3] clk: renesas: r8a7795: Add ccree clock
Geert Uytterhoeven
geert at linux-m68k.org
Thu May 17 01:41:46 PDT 2018
Hi Gilad,
On Thu, May 17, 2018 at 10:00 AM, Gilad Ben-Yossef <gilad at benyossef.com> wrote:
> On Tue, May 15, 2018 at 5:47 PM, Geert Uytterhoeven
> <geert at linux-m68k.org> wrote:
>> On Tue, May 15, 2018 at 2:29 PM, Gilad Ben-Yossef <gilad at benyossef.com> wrote:
>>> This patch adds the clock used by the CryptoCell 630p instance in the SoC.
>>>
>>> Signed-off-by: Gilad Ben-Yossef <gilad at benyossef.com>
>>
>> Thanks for your patch!
>>
>>> --- a/drivers/clk/renesas/r8a7795-cpg-mssr.c
>>> +++ b/drivers/clk/renesas/r8a7795-cpg-mssr.c
>>> @@ -132,6 +132,7 @@ static struct mssr_mod_clk r8a7795_mod_clks[] __initdata = {
>>> DEF_MOD("sys-dmac2", 217, R8A7795_CLK_S0D3),
>>> DEF_MOD("sys-dmac1", 218, R8A7795_CLK_S0D3),
>>> DEF_MOD("sys-dmac0", 219, R8A7795_CLK_S0D3),
>>> + DEF_MOD("ccree", 229, R8A7795_CLK_S3D2),
>>
>> I don't know if "ccree" is the proper name for this clock, as there
>> may be multiple
>> instances.
>
> I'd be happy to rename it to anything else. Suggestions?
I believe it should be called "sceg-pub".
>> I also can't verify the parent clock.
>
> I'm afraid I can't really help. This is based on code snippet from
> Renesas. I verified it works but
> I am not an expert on the clock settings :-(
As your driver doesn't care about the clock rate, only about
enabling/disabling the clock, the actual parent doesn't matter much.
After some deeper diving into the datasheet, I believe the correct parent is
the CR clock, which is unfortunately not yet supported by the R-Car H3 clock
driver. I'll send a patch...
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
More information about the linux-arm-kernel
mailing list