[PATCH v2 2/3] arm64: dts: renesas: draak: Describe CVBS input

[Niklas Söderlund]

Hi Jacopo,

Thanks for your patch.

On 2018-05-16 15:42:08 +0200, Jacopo Mondi wrote:
> Describe CVBS video input through analog video decoder ADV7180
> connected to video input interface VIN4.
> 
> The video input signal path is shared with HDMI video input, and
> selected by on-board switches SW-53 and SW-54 with CVBS input selected
> by the default switches configuration.

You are missing your SoB line :-)

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>

> ---
>  arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 36 ++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
> index d03f194..9aba28f 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
> @@ -142,6 +142,11 @@
>  		groups = "usb0";
>  		function = "usb0";
>  	};
> +
> +	vin4_pins_cvbs: vin4 {
> +		groups = "vin4_data8", "vin4_sync", "vin4_clk";
> +		function = "vin4";
> +	};
>  };
>  
>  &i2c0 {
> @@ -154,6 +159,17 @@
>  		reg = <0x50>;
>  		pagesize = <8>;
>  	};
> +
> +	analog-video at 20 {
> +		compatible = "adi,adv7180";
> +		reg = <0x20>;
> +
> +		port {
> +			adv7180_out: endpoint {
> +				remote-endpoint = <&vin4_in>;
> +			};
> +		};
> +	};
>  };
>  
>  &i2c1 {
> @@ -246,3 +262,23 @@
>  	timeout-sec = <60>;
>  	status = "okay";
>  };
> +
> +&vin4 {
> +	pinctrl-0 = <&vin4_pins_cvbs>;
> +	pinctrl-names = "default";
> +
> +	status = "okay";
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		port at 0 {
> +			reg = <0>;
> +
> +			vin4_in: endpoint {
> +				remote-endpoint = <&adv7180_out>;
> +			};
> +		};
> +	};
> +};
> -- 
> 2.7.4
> 

-- 
Regards,
Niklas Söderlund