[PATCH] ARM: dts: imx51-zii-rdu1: limit usbh1 to full-speed

Nikita Yushchenko nikita.yoush at cogentembedded.com
Tue May 15 01:45:02 PDT 2018


On RDU1, imx51 usbh1 interface is either not used, or used via external
block that breaks USB2 signalling.

To keep things working if high-speed device gets connected to that
block, use ChipIdea feature to limit port to full speed.

Signed-off-by: Nikita Yushchenko <nikita.yoush at cogentembedded.com>
---
 arch/arm/boot/dts/imx51-zii-rdu1.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index 36a63ae52e48..c26f053f29b0 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -603,6 +603,7 @@
 	phy_type = "ulpi";
 	fsl,usbphy = <&usbh1phy>;
 	disable-over-current;
+	maximum-speed = "full-speed";
 	vbus-supply = <&reg_5p0v_main>;
 	status = "okay";
 };
-- 
2.11.0




More information about the linux-arm-kernel mailing list