[PATCH v2 3/5] arm64: dts: hi3660: Add CPU frequency scaling support
Leo Yan
leo.yan at linaro.org
Mon May 14 19:53:13 PDT 2018
Add two CPU OPP tables, one table is corresponding to one cluster,
which allow CPU frequency scaling on hi3660 platforms.
Signed-off-by: Leo Yan <leo.yan at linaro.org>
---
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 86 +++++++++++++++++++++++++++++++
1 file changed, 86 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 3a3bcff..a39da09 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -62,6 +62,8 @@
next-level-cache = <&A53_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <592>;
+ clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+ operating-points-v2 = <&cluster0_opp>;
};
cpu1: cpu at 1 {
@@ -72,6 +74,8 @@
next-level-cache = <&A53_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <592>;
+ clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+ operating-points-v2 = <&cluster0_opp>;
};
cpu2: cpu at 2 {
@@ -82,6 +86,8 @@
next-level-cache = <&A53_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <592>;
+ clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+ operating-points-v2 = <&cluster0_opp>;
};
cpu3: cpu at 3 {
@@ -92,6 +98,8 @@
next-level-cache = <&A53_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <592>;
+ clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+ operating-points-v2 = <&cluster0_opp>;
};
cpu4: cpu at 100 {
@@ -102,6 +110,8 @@
next-level-cache = <&A73_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
capacity-dmips-mhz = <1024>;
+ clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+ operating-points-v2 = <&cluster1_opp>;
};
cpu5: cpu at 101 {
@@ -112,6 +122,8 @@
next-level-cache = <&A73_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
capacity-dmips-mhz = <1024>;
+ clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+ operating-points-v2 = <&cluster1_opp>;
};
cpu6: cpu at 102 {
@@ -122,6 +134,8 @@
next-level-cache = <&A73_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
capacity-dmips-mhz = <1024>;
+ clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+ operating-points-v2 = <&cluster1_opp>;
};
cpu7: cpu at 103 {
@@ -132,6 +146,8 @@
next-level-cache = <&A73_L2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
capacity-dmips-mhz = <1024>;
+ clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+ operating-points-v2 = <&cluster1_opp>;
};
idle-states {
@@ -174,6 +190,76 @@
};
};
+ cluster0_opp: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <533000000>;
+ opp-microvolt = <700000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp01 {
+ opp-hz = /bits/ 64 <999000000>;
+ opp-microvolt = <800000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp02 {
+ opp-hz = /bits/ 64 <1402000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp03 {
+ opp-hz = /bits/ 64 <1709000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp04 {
+ opp-hz = /bits/ 64 <1844000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <300000>;
+ };
+ };
+
+ cluster1_opp: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp10 {
+ opp-hz = /bits/ 64 <903000000>;
+ opp-microvolt = <700000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp11 {
+ opp-hz = /bits/ 64 <1421000000>;
+ opp-microvolt = <800000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp12 {
+ opp-hz = /bits/ 64 <1805000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp13 {
+ opp-hz = /bits/ 64 <2112000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <300000>;
+ };
+
+ opp14 {
+ opp-hz = /bits/ 64 <2362000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <300000>;
+ };
+ };
+
gic: interrupt-controller at e82b0000 {
compatible = "arm,gic-400";
reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */
--
1.9.1
More information about the linux-arm-kernel
mailing list