[PATCH 1/2] clk: davinci: pll-dm646x: keep PLL2 SYSCLK1 always enabled

[Sekhar Nori]

On Sunday 13 May 2018 02:50 AM, David Lechner wrote:
> On 05/11/2018 09:10 AM, Sekhar Nori wrote:
>> PLL2 SYSCLK1 on DM646x is connected to DDR2 PHY and cannot
>> be disabled. Mark it so to prevent unused clock disable
>> infrastructure from disabling it.
>>
>> Signed-off-by: Sekhar Nori <nsekhar at ti.com>
>> ---
>>   drivers/clk/davinci/pll-dm646x.c | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/clk/davinci/pll-dm646x.c
>> b/drivers/clk/davinci/pll-dm646x.c
>> index eb96dd72b6b7..5bdf1cb5fda8 100644
>> --- a/drivers/clk/davinci/pll-dm646x.c
>> +++ b/drivers/clk/davinci/pll-dm646x.c
>> @@ -72,7 +72,7 @@ static const struct davinci_pll_clk_info
>> dm646x_pll2_info = {
>>       .flags = 0,
>>   };
>>   -SYSCLK(1, pll2_sysclk1, pll2_pllen, 4, 0);
>> +SYSCLK(1, pll2_sysclk1, pll2_pllen, 4, SYSCLK_ALWAYS_ENABLED);
>>     int dm646x_pll2_init(struct device *dev, void __iomem *base,
>> struct regmap *cfgchip)
>>   {
>>
> 
> FYI, this only applies on top of "clk: davinci: pll: allow dev == NULL".
> Not sure if that was intentional.

Not actually. I will resend the series as it applies to v4.17-rc1.

Thanks,
Sekhar