[PATCH 1/3] thermal: imx: remove cpufreq cooling registration
Anson Huang
Anson.Huang at nxp.com
Mon May 14 01:09:17 PDT 2018
This patch removes cpufreq cooling registration in
thermal .probe function, cpufreq cooling should be
done in cpufreq driver when it is ready.
Signed-off-by: Anson Huang <Anson.Huang at nxp.com>
---
drivers/thermal/imx_thermal.c | 16 ----------------
1 file changed, 16 deletions(-)
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index c30dc21..8eedb97 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -9,7 +9,6 @@
#include <linux/clk.h>
#include <linux/cpufreq.h>
-#include <linux/cpu_cooling.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/init.h>
@@ -207,7 +206,6 @@ static struct thermal_soc_data thermal_imx7d_data = {
struct imx_thermal_data {
struct cpufreq_policy *policy;
struct thermal_zone_device *tz;
- struct thermal_cooling_device *cdev;
enum thermal_device_mode mode;
struct regmap *tempmon;
u32 c1, c2; /* See formula in imx_init_calib() */
@@ -729,22 +727,12 @@ static int imx_thermal_probe(struct platform_device *pdev)
return -EPROBE_DEFER;
}
- data->cdev = cpufreq_cooling_register(data->policy);
- if (IS_ERR(data->cdev)) {
- ret = PTR_ERR(data->cdev);
- dev_err(&pdev->dev,
- "failed to register cpufreq cooling device: %d\n", ret);
- cpufreq_cpu_put(data->policy);
- return ret;
- }
-
data->thermal_clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(data->thermal_clk)) {
ret = PTR_ERR(data->thermal_clk);
if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev,
"failed to get thermal clk: %d\n", ret);
- cpufreq_cooling_unregister(data->cdev);
cpufreq_cpu_put(data->policy);
return ret;
}
@@ -759,7 +747,6 @@ static int imx_thermal_probe(struct platform_device *pdev)
ret = clk_prepare_enable(data->thermal_clk);
if (ret) {
dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
- cpufreq_cooling_unregister(data->cdev);
cpufreq_cpu_put(data->policy);
return ret;
}
@@ -775,7 +762,6 @@ static int imx_thermal_probe(struct platform_device *pdev)
dev_err(&pdev->dev,
"failed to register thermal zone device %d\n", ret);
clk_disable_unprepare(data->thermal_clk);
- cpufreq_cooling_unregister(data->cdev);
cpufreq_cpu_put(data->policy);
return ret;
}
@@ -811,7 +797,6 @@ static int imx_thermal_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret);
clk_disable_unprepare(data->thermal_clk);
thermal_zone_device_unregister(data->tz);
- cpufreq_cooling_unregister(data->cdev);
cpufreq_cpu_put(data->policy);
return ret;
}
@@ -831,7 +816,6 @@ static int imx_thermal_remove(struct platform_device *pdev)
clk_disable_unprepare(data->thermal_clk);
thermal_zone_device_unregister(data->tz);
- cpufreq_cooling_unregister(data->cdev);
cpufreq_cpu_put(data->policy);
return 0;
--
2.7.4
More information about the linux-arm-kernel
mailing list