[PATCH net-next v2 15/15] arm64: dts: allwinner: a64: add SRAM controller device tree node

[Chen-Yu Tsai]

On Wed, May 2, 2018 at 4:54 AM, Maxime Ripard <maxime.ripard at bootlin.com> wrote:
> On Wed, May 02, 2018 at 06:19:51PM +0800, Icenowy Zheng wrote:
>>
>>
>> 于 2018年5月2日 GMT+08:00 下午5:53:21, Chen-Yu Tsai <wens at csie.org> 写到:
>> >On Wed, May 2, 2018 at 5:51 PM, Maxime Ripard
>> ><maxime.ripard at bootlin.com> wrote:
>> >> Hi,
>> >>
>> >> On Wed, May 02, 2018 at 12:12:27AM +0800, Chen-Yu Tsai wrote:
>> >>> From: Icenowy Zheng <icenowy at aosc.io>
>> >>>
>> >>> Allwinner A64 has a SRAM controller, and in the device tree
>> >currently
>> >>> we have a syscon node to enable EMAC driver to access the EMAC clock
>> >>> register. As SRAM controller driver can now export regmap for this
>> >>> register, replace the syscon node to the SRAM controller device
>> >node,
>> >>> and let EMAC driver to acquire its EMAC clock regmap.
>> >>>
>> >>> Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
>> >>> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
>> >>> ---
>> >>>  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 23
>> >+++++++++++++++----
>> >>>  1 file changed, 19 insertions(+), 4 deletions(-)
>> >>>
>> >>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
>> >b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
>> >>> index 1b2ef28c42bd..1c37659d9d41 100644
>> >>> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
>> >>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
>> >>> @@ -168,10 +168,25 @@
>> >>>               #size-cells = <1>;
>> >>>               ranges;
>> >>>
>> >>> -             syscon: syscon at 1c00000 {
>> >>> -                     compatible =
>> >"allwinner,sun50i-a64-system-controller",
>> >>> -                             "syscon";
>> >>> +             sram_controller: sram-controller at 1c00000 {
>> >>> +                     compatible =
>> >"allwinner,sun50i-a64-sram-controller";
>> >>
>> >> I don't think there's anything preventing us from keeping the
>> >> -system-controller compatible. It's what was in the DT before, and
>> >> it's how it's called in the datasheet.
>> >
>> >I actually meant to ask you about this. The -system-controller
>> >compatible matches the datasheet better. Maybe we should just
>> >switch to that one?
>>
>> No, if we do the switch the system-controller compatible,
>> the device will be probed on the same memory region with
>> a syscon on old DTs.
>
> The device hasn't magically changed either. Maybe we just need to add
> a check to make sure we don't have the syscon compatible in the SRAM
> driver probe so that the double driver issue doesn't happen?

The syscon interface (which is not even a full blown device driver)
only looks at the "syscon" compatible. Either way we're removing that
part from the device tree so things should be ok for new device trees.
As Maxime mentioned we can do a check for the syscon compatible and
either give a warning to the user asking them to update their device
tree, or not register our custom regmap, or not probe the SRAM driver.
Personally I prefer the first option. The system controller block is
probed before any syscon users, so we should be fine, given the dwmac
driver goes the custom regmap path first.

BTW, I still might end up changing the compatible. The manual uses
"system control", not "system controller", which I think makes sense,
since it is just a bunch of register files, kind of like the GRF
(General Register Files) block found in Rockchip SoCs [1], and not an
actual "controller".

ChenYu

[1] https://www.kernel.org/doc/Documentation/devicetree/bindings/soc/rockchip/grf.txt