[PATCH] arm: dts: imx: fix IPU OF graph endpoint node names

[Shawn Guo]

On Tue, May 08, 2018 at 10:22:29AM -0500, Rob Herring wrote:
> On Tue, May 8, 2018 at 9:06 AM, Fabio Estevam <festevam at gmail.com> wrote:
> > Hi Rob,
> >
> > On Tue, May 8, 2018 at 10:59 AM, Rob Herring <robh at kernel.org> wrote:
> >
> >> diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> >> index 18b65052553d..654cf2c9b073 100644
> >> --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> >> +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> >> @@ -379,9 +379,6 @@
> >>                 powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */
> >>
> >>                 port {
> >> -                       #address-cells = <1>;
> >> -                       #size-cells = <0>;
> >> -
> >>                         ov5640_to_mipi_csi2: endpoint {
> >>                                 remote-endpoint = <&mipi_csi2_in>;
> >>                                 clock-lanes = <0>;
> >> diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> >> index f019f9900369..c2de2250718c 100644
> >> --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> >> +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> >> @@ -294,9 +294,6 @@
> >>                 reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
> >>
> >>                 port {
> >> -                       #address-cells = <1>;
> >> -                       #size-cells = <0>;
> >> -
> >>                         ov5640_to_mipi_csi2: endpoint {
> >
> > These two changes seem unrelated and I have already fixed them at:
> > https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git/commit/?h=imx/dt&id=1b215c73d1586e6f2586e9a6d6dfaf49cc142b3a
> 
> Right. Will drop them.

Applied.  The git am command dropped them automatically.  Thanks.

Shawn