Applied "ASoC: qdsp6: dt-bindings: Add q6afe dt bindings" to the asoc tree

Mark Brown broonie at kernel.org
Thu May 10 20:17:53 PDT 2018


The patch

   ASoC: qdsp6: dt-bindings: Add q6afe dt bindings

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 6ad2ef6530bcb9ab838975c1587c527bed422fbe Mon Sep 17 00:00:00 2001
From: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
Date: Wed, 9 May 2018 13:56:15 +0100
Subject: [PATCH] ASoC: qdsp6: dt-bindings: Add q6afe dt bindings

This patch add DT bindings for AFE (Audio Frontend) DSP module.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr at codeaurora.org>
Reviewed-by: Rob Herring <robh at kernel.org>
Reviewed-by: Banajit Goswami <bgoswami at codeaurora.org>
Signed-off-by: Mark Brown <broonie at kernel.org>
---
 .../devicetree/bindings/sound/qcom,q6afe.txt  | 104 ++++++++++++++++++
 include/dt-bindings/sound/qcom,q6afe.h        |  31 ++++++
 2 files changed, 135 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6afe.txt
 create mode 100644 include/dt-bindings/sound/qcom,q6afe.h

diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
new file mode 100644
index 000000000000..14335a08b963
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
@@ -0,0 +1,104 @@
+Qualcomm Audio Front End (Q6AFE) binding
+
+AFE is one of the APR audio service on Q6DSP
+Please refer to qcom,apr.txt for details of the common apr service bindings
+used by all apr services. Must contain the following properties.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,q6afe-v<MAJOR-NUMBER>.<MINOR-NUMBER>"
+		  Or "qcom,q6afe" where the version number can be queried
+		  from DSP.
+		  example "qcom,q6afe"
+
+= AFE DAIs (Digial Audio Interface)
+"dais" subnode of the AFE node. It represents afe dais, each afe dai is a
+subnode of "dais" representing board specific dai setup.
+"dais" node should have following properties followed by dai children.
+
+- #sound-dai-cells
+	Usage: required
+	Value type: <u32>
+	Definition: Must be 1
+
+- #address-cells
+	Usage: required
+	Value type: <u32>
+	Definition: Must be 1
+
+- #size-cells
+	Usage: required
+	Value type: <u32>
+	Definition: Must be 0
+
+== AFE DAI is subnode of "dais" and represent a dai, it includes board specific
+configuration of each dai. Must contain the following properties.
+
+- reg
+	Usage: required
+	Value type: <u32>
+	Definition: Must be dai id
+
+- qcom,sd-lines
+	Usage: required for mi2s interface
+	Value type: <prop-encoded-array>
+	Definition: Must be list of serial data lines used by this dai.
+	should be one or more of the 1-4 sd lines.
+
+= EXAMPLE
+
+q6afe at 4 {
+	compatible = "qcom,q6afe";
+	reg = <APR_SVC_AFE>;
+
+	dais {
+		#sound-dai-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hdmi at 1 {
+			reg = <1>;
+		};
+
+		prim-mi2s-rx at 16 {
+			reg = <16>;
+			qcom,sd-lines = <1 3>;
+		};
+
+		prim-mi2s-tx at 17 {
+			reg = <17>;
+			qcom,sd-lines = <2>;
+		};
+
+		sec-mi2s-rx at 18 {
+			reg = <18>;
+			qcom,sd-lines = <1 4>;
+		};
+
+		sec-mi2s-tx at 19 {
+			reg = <19>;
+			qcom,sd-lines = <2>;
+		};
+
+		tert-mi2s-rx at 20 {
+			reg = <20>;
+			qcom,sd-lines = <2 4>;
+		};
+
+		tert-mi2s-tx at 21 {
+			reg = <21>;
+			qcom,sd-lines = <1>;
+		};
+
+		quat-mi2s-rx at 22 {
+			reg = <22>;
+			qcom,sd-lines = <1>;
+		};
+
+		quat-mi2s-tx at 23 {
+			reg = <23>;
+			qcom,sd-lines = <2>;
+		};
+	};
+};
diff --git a/include/dt-bindings/sound/qcom,q6afe.h b/include/dt-bindings/sound/qcom,q6afe.h
new file mode 100644
index 000000000000..e162045f5dc9
--- /dev/null
+++ b/include/dt-bindings/sound/qcom,q6afe.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DT_BINDINGS_Q6_AFE_H__
+#define __DT_BINDINGS_Q6_AFE_H__
+
+/* Audio Front End (AFE) virtual ports IDs */
+#define HDMI_RX		1
+#define SLIMBUS_0_RX    2
+#define SLIMBUS_0_TX    3
+#define SLIMBUS_1_RX    4
+#define SLIMBUS_1_TX    5
+#define SLIMBUS_2_RX    6
+#define SLIMBUS_2_TX    7
+#define SLIMBUS_3_RX    8
+#define SLIMBUS_3_TX    9
+#define SLIMBUS_4_RX    10
+#define SLIMBUS_4_TX    11
+#define SLIMBUS_5_RX    12
+#define SLIMBUS_5_TX    13
+#define SLIMBUS_6_RX    14
+#define SLIMBUS_6_TX    15
+#define PRIMARY_MI2S_RX		16
+#define PRIMARY_MI2S_TX		17
+#define SECONDARY_MI2S_RX	18
+#define SECONDARY_MI2S_TX	19
+#define TERTIARY_MI2S_RX	20
+#define TERTIARY_MI2S_TX	21
+#define QUATERNARY_MI2S_RX	22
+#define QUATERNARY_MI2S_TX	23
+
+#endif /* __DT_BINDINGS_Q6_AFE_H__ */
+
-- 
2.17.0




More information about the linux-arm-kernel mailing list