[PATCH 2/3] arm64: dts: juno: replace '_' with '-' in node names
Liviu Dudau
liviu.dudau at arm.com
Thu May 10 02:45:18 PDT 2018
On Wed, May 09, 2018 at 05:44:50PM +0100, Sudeep Holla wrote:
> The latest DTC throws warnings for character '_' in the node names.
>
> Warning (node_name_chars_strict): /thermal-zones/big_cluster: Character '_' not recommended in node name
> Warning (node_name_chars_strict): /thermal-zones/little_cluster: Character '_' not recommended in node name
> Warning (node_name_chars_strict): /smb at 8000000/motherboard/gpio_keys: Character '_' not recommended in node name
> Warning (node_name_chars_strict): /pmu_a57: Character '_' not recommended in node name
> Warning (node_name_chars_strict): /pmu_a53: Character '_' not recommended in node name
>
> The general recommendation is to use character '-' for all the node names.
> This patch fixes the warnings following the recommendation.
>
> Cc: Liviu Dudau <liviu.dudau at arm.com>
Acked-by: Liviu Dudau <liviu.dudau at arm.com>
> Signed-off-by: Sudeep Holla <sudeep.holla at arm.com>
> ---
> arch/arm64/boot/dts/arm/juno-base.dtsi | 4 ++--
> arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 2 +-
> arch/arm64/boot/dts/arm/juno-r1.dts | 4 ++--
> arch/arm64/boot/dts/arm/juno-r2.dts | 4 ++--
> arch/arm64/boot/dts/arm/juno.dts | 4 ++--
> 5 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
> index b2fedaab3fcc..b74e462c6658 100644
> --- a/arch/arm64/boot/dts/arm/juno-base.dtsi
> +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
> @@ -572,14 +572,14 @@
> thermal-sensors = <&scpi_sensors0 3>;
> };
>
> - big_cluster_thermal_zone: big_cluster {
> + big_cluster_thermal_zone: big-cluster {
> polling-delay = <1000>;
> polling-delay-passive = <100>;
> thermal-sensors = <&scpi_sensors0 21>;
> status = "disabled";
> };
>
> - little_cluster_thermal_zone: little_cluster {
> + little_cluster_thermal_zone: little-cluster {
> polling-delay = <1000>;
> polling-delay-passive = <100>;
> thermal-sensors = <&scpi_sensors0 22>;
> diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
> index 4b38195a8bea..70e3409d86a3 100644
> --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
> +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
> @@ -54,7 +54,7 @@
> regulator-always-on;
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> power-button {
> diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
> index c52c5c40dede..2c5db03f226c 100644
> --- a/arch/arm64/boot/dts/arm/juno-r1.dts
> +++ b/arch/arm64/boot/dts/arm/juno-r1.dts
> @@ -201,7 +201,7 @@
> };
> };
>
> - pmu_a57 {
> + pmu-a57 {
> compatible = "arm,cortex-a57-pmu";
> interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
> @@ -209,7 +209,7 @@
> <&A57_1>;
> };
>
> - pmu_a53 {
> + pmu-a53 {
> compatible = "arm,cortex-a53-pmu";
> interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
> diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts
> index a90982ceda35..c51950f4a1b6 100644
> --- a/arch/arm64/boot/dts/arm/juno-r2.dts
> +++ b/arch/arm64/boot/dts/arm/juno-r2.dts
> @@ -201,7 +201,7 @@
> };
> };
>
> - pmu_a72 {
> + pmu-a72 {
> compatible = "arm,cortex-a72-pmu";
> interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
> @@ -209,7 +209,7 @@
> <&A72_1>;
> };
>
> - pmu_a53 {
> + pmu-a53 {
> compatible = "arm,cortex-a53-pmu";
> interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
> diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
> index c9236c4b967d..2b2bf39c30ef 100644
> --- a/arch/arm64/boot/dts/arm/juno.dts
> +++ b/arch/arm64/boot/dts/arm/juno.dts
> @@ -200,7 +200,7 @@
> };
> };
>
> - pmu_a57 {
> + pmu-a57 {
> compatible = "arm,cortex-a57-pmu";
> interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
> @@ -208,7 +208,7 @@
> <&A57_1>;
> };
>
> - pmu_a53 {
> + pmu-a53 {
> compatible = "arm,cortex-a53-pmu";
> interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
> --
> 2.7.4
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
More information about the linux-arm-kernel
mailing list