[PATCH v8 11/24] ASoC: qdsp6: q6afe: Add support to MI2S ports
Srinivas Kandagatla
srinivas.kandagatla at linaro.org
Wed May 9 05:56:22 PDT 2018
This patch adds support to 4 MI2S ports on LPASS.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr at codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami at codeaurora.org>
---
sound/soc/qcom/qdsp6/q6afe.c | 224 +++++++++++++++++++++++++++++++++++++++++++
sound/soc/qcom/qdsp6/q6afe.h | 13 +++
2 files changed, 237 insertions(+)
diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c
index 1de5c941b11e..6808b7bae5d5 100644
--- a/sound/soc/qcom/qdsp6/q6afe.c
+++ b/sound/soc/qcom/qdsp6/q6afe.c
@@ -14,6 +14,10 @@
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/soc/qcom/apr.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
#include "q6dsp-errno.h"
#include "q6core.h"
#include "q6afe.h"
@@ -30,6 +34,32 @@
#define AFE_PARAM_ID_CDC_SLIMBUS_SLAVE_CFG 0x00010235
#define AFE_PARAM_ID_SLIMBUS_CONFIG 0x00010212
+#define AFE_PARAM_ID_I2S_CONFIG 0x0001020D
+
+/* I2S config specific */
+#define AFE_API_VERSION_I2S_CONFIG 0x1
+#define AFE_PORT_I2S_SD0 0x1
+#define AFE_PORT_I2S_SD1 0x2
+#define AFE_PORT_I2S_SD2 0x3
+#define AFE_PORT_I2S_SD3 0x4
+#define AFE_PORT_I2S_SD0_MASK BIT(0x1)
+#define AFE_PORT_I2S_SD1_MASK BIT(0x2)
+#define AFE_PORT_I2S_SD2_MASK BIT(0x3)
+#define AFE_PORT_I2S_SD3_MASK BIT(0x4)
+#define AFE_PORT_I2S_SD0_1_MASK GENMASK(2, 1)
+#define AFE_PORT_I2S_SD2_3_MASK GENMASK(4, 3)
+#define AFE_PORT_I2S_SD0_1_2_MASK GENMASK(3, 1)
+#define AFE_PORT_I2S_SD0_1_2_3_MASK GENMASK(4, 1)
+#define AFE_PORT_I2S_QUAD01 0x5
+#define AFE_PORT_I2S_QUAD23 0x6
+#define AFE_PORT_I2S_6CHS 0x7
+#define AFE_PORT_I2S_8CHS 0x8
+#define AFE_PORT_I2S_MONO 0x0
+#define AFE_PORT_I2S_STEREO 0x1
+#define AFE_PORT_CONFIG_I2S_WS_SRC_EXTERNAL 0x0
+#define AFE_PORT_CONFIG_I2S_WS_SRC_INTERNAL 0x1
+#define AFE_LINEAR_PCM_DATA 0x0
+
/* Port IDs */
#define AFE_API_VERSION_HDMI_CONFIG 0x1
@@ -65,6 +95,19 @@
#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_RX 0x400c
/* SLIMbus Tx port on channel 6. */
#define AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_TX 0x400d
+#define AFE_PORT_ID_PRIMARY_MI2S_RX 0x1000
+#define AFE_PORT_ID_PRIMARY_MI2S_TX 0x1001
+#define AFE_PORT_ID_SECONDARY_MI2S_RX 0x1002
+#define AFE_PORT_ID_SECONDARY_MI2S_TX 0x1003
+#define AFE_PORT_ID_TERTIARY_MI2S_RX 0x1004
+#define AFE_PORT_ID_TERTIARY_MI2S_TX 0x1005
+#define AFE_PORT_ID_QUATERNARY_MI2S_RX 0x1006
+#define AFE_PORT_ID_QUATERNARY_MI2S_TX 0x1007
+
+#define Q6AFE_LPASS_MODE_CLK1_VALID 1
+#define Q6AFE_LPASS_MODE_CLK2_VALID 2
+#define Q6AFE_LPASS_CLK_SRC_INTERNAL 1
+#define Q6AFE_LPASS_CLK_ROOT_DEFAULT 0
#define TIMEOUT_MS 1000
#define AFE_CMD_RESP_AVAIL 0
@@ -159,10 +202,21 @@ struct afe_param_id_slimbus_cfg {
*/
} __packed;
+struct afe_param_id_i2s_cfg {
+ u32 i2s_cfg_minor_version;
+ u16 bit_width;
+ u16 channel_mode;
+ u16 mono_stereo;
+ u16 ws_src;
+ u32 sample_rate;
+ u16 data_format;
+ u16 reserved;
+} __packed;
union afe_port_config {
struct afe_param_id_hdmi_multi_chan_audio_cfg hdmi_multi_ch;
struct afe_param_id_slimbus_cfg slim_cfg;
+ struct afe_param_id_i2s_cfg i2s_cfg;
} __packed;
struct q6afe_port {
@@ -205,6 +259,22 @@ static struct afe_port_map port_maps[AFE_PORT_MAX] = {
SLIMBUS_5_RX, 1, 1},
[SLIMBUS_6_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_RX,
SLIMBUS_6_RX, 1, 1},
+ [PRIMARY_MI2S_RX] = { AFE_PORT_ID_PRIMARY_MI2S_RX,
+ PRIMARY_MI2S_RX, 1, 1},
+ [PRIMARY_MI2S_TX] = { AFE_PORT_ID_PRIMARY_MI2S_TX,
+ PRIMARY_MI2S_RX, 0, 1},
+ [SECONDARY_MI2S_RX] = { AFE_PORT_ID_SECONDARY_MI2S_RX,
+ SECONDARY_MI2S_RX, 1, 1},
+ [SECONDARY_MI2S_TX] = { AFE_PORT_ID_SECONDARY_MI2S_TX,
+ SECONDARY_MI2S_TX, 0, 1},
+ [TERTIARY_MI2S_RX] = { AFE_PORT_ID_TERTIARY_MI2S_RX,
+ TERTIARY_MI2S_RX, 1, 1},
+ [TERTIARY_MI2S_TX] = { AFE_PORT_ID_TERTIARY_MI2S_TX,
+ TERTIARY_MI2S_TX, 0, 1},
+ [QUATERNARY_MI2S_RX] = { AFE_PORT_ID_QUATERNARY_MI2S_RX,
+ QUATERNARY_MI2S_RX, 1, 1},
+ [QUATERNARY_MI2S_TX] = { AFE_PORT_ID_QUATERNARY_MI2S_TX,
+ QUATERNARY_MI2S_TX, 0, 1},
};
static struct q6afe_port *afe_find_port(struct q6afe *afe, int token)
@@ -464,6 +534,149 @@ void q6afe_hdmi_port_prepare(struct q6afe_port *port,
}
EXPORT_SYMBOL_GPL(q6afe_hdmi_port_prepare);
+/**
+ * q6afe_i2s_port_prepare() - Prepare i2s afe port.
+ *
+ * @port: Instance of afe port
+ * @cfg: I2S configuration for the afe port
+ * Return: Will be an negative on error and zero on success.
+ */
+int q6afe_i2s_port_prepare(struct q6afe_port *port, struct q6afe_i2s_cfg *cfg)
+{
+ union afe_port_config *pcfg = &port->port_cfg;
+ struct device *dev = port->afe->dev;
+ int num_sd_lines;
+
+ pcfg->i2s_cfg.i2s_cfg_minor_version = AFE_API_VERSION_I2S_CONFIG;
+ pcfg->i2s_cfg.sample_rate = cfg->sample_rate;
+ pcfg->i2s_cfg.bit_width = cfg->bit_width;
+ pcfg->i2s_cfg.data_format = AFE_LINEAR_PCM_DATA;
+
+ switch (cfg->fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ pcfg->i2s_cfg.ws_src = AFE_PORT_CONFIG_I2S_WS_SRC_INTERNAL;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ /* CPU is slave */
+ pcfg->i2s_cfg.ws_src = AFE_PORT_CONFIG_I2S_WS_SRC_EXTERNAL;
+ break;
+ default:
+ break;
+ }
+
+ num_sd_lines = hweight_long(cfg->sd_line_mask);
+
+ switch (num_sd_lines) {
+ case 0:
+ dev_err(dev, "no line is assigned\n");
+ return -EINVAL;
+ case 1:
+ switch (cfg->sd_line_mask) {
+ case AFE_PORT_I2S_SD0_MASK:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_SD0;
+ break;
+ case AFE_PORT_I2S_SD1_MASK:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_SD1;
+ break;
+ case AFE_PORT_I2S_SD2_MASK:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_SD2;
+ break;
+ case AFE_PORT_I2S_SD3_MASK:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_SD3;
+ break;
+ default:
+ dev_err(dev, "Invalid SD lines\n");
+ return -EINVAL;
+ }
+ break;
+ case 2:
+ switch (cfg->sd_line_mask) {
+ case AFE_PORT_I2S_SD0_1_MASK:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_QUAD01;
+ break;
+ case AFE_PORT_I2S_SD2_3_MASK:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_QUAD23;
+ break;
+ default:
+ dev_err(dev, "Invalid SD lines\n");
+ return -EINVAL;
+ }
+ break;
+ case 3:
+ switch (cfg->sd_line_mask) {
+ case AFE_PORT_I2S_SD0_1_2_MASK:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_6CHS;
+ break;
+ default:
+ dev_err(dev, "Invalid SD lines\n");
+ return -EINVAL;
+ }
+ break;
+ case 4:
+ switch (cfg->sd_line_mask) {
+ case AFE_PORT_I2S_SD0_1_2_3_MASK:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_8CHS;
+
+ break;
+ default:
+ dev_err(dev, "Invalid SD lines\n");
+ return -EINVAL;
+ }
+ break;
+ default:
+ dev_err(dev, "Invalid SD lines\n");
+ return -EINVAL;
+ }
+
+ switch (cfg->num_channels) {
+ case 1:
+ case 2:
+ switch (pcfg->i2s_cfg.channel_mode) {
+ case AFE_PORT_I2S_QUAD01:
+ case AFE_PORT_I2S_6CHS:
+ case AFE_PORT_I2S_8CHS:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_SD0;
+ break;
+ case AFE_PORT_I2S_QUAD23:
+ pcfg->i2s_cfg.channel_mode = AFE_PORT_I2S_SD2;
+ break;
+ }
+
+ if (cfg->num_channels == 2)
+ pcfg->i2s_cfg.mono_stereo = AFE_PORT_I2S_STEREO;
+ else
+ pcfg->i2s_cfg.mono_stereo = AFE_PORT_I2S_MONO;
+
+ break;
+ case 3:
+ case 4:
+ if (pcfg->i2s_cfg.channel_mode < AFE_PORT_I2S_QUAD01) {
+ dev_err(dev, "Invalid Channel mode\n");
+ return -EINVAL;
+ }
+ break;
+ case 5:
+ case 6:
+ if (pcfg->i2s_cfg.channel_mode < AFE_PORT_I2S_6CHS) {
+ dev_err(dev, "Invalid Channel mode\n");
+ return -EINVAL;
+ }
+ break;
+ case 7:
+ case 8:
+ if (pcfg->i2s_cfg.channel_mode < AFE_PORT_I2S_8CHS) {
+ dev_err(dev, "Invalid Channel mode\n");
+ return -EINVAL;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(q6afe_i2s_port_prepare);
+
/**
* q6afe_port_start() - Start a afe port
*
@@ -555,6 +768,17 @@ struct q6afe_port *q6afe_port_get_from_id(struct device *dev, int id)
case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_RX:
cfg_type = AFE_PARAM_ID_SLIMBUS_CONFIG;
break;
+
+ case AFE_PORT_ID_PRIMARY_MI2S_RX:
+ case AFE_PORT_ID_PRIMARY_MI2S_TX:
+ case AFE_PORT_ID_SECONDARY_MI2S_RX:
+ case AFE_PORT_ID_SECONDARY_MI2S_TX:
+ case AFE_PORT_ID_TERTIARY_MI2S_RX:
+ case AFE_PORT_ID_TERTIARY_MI2S_TX:
+ case AFE_PORT_ID_QUATERNARY_MI2S_RX:
+ case AFE_PORT_ID_QUATERNARY_MI2S_TX:
+ cfg_type = AFE_PARAM_ID_I2S_CONFIG;
+ break;
default:
dev_err(dev, "Invalid port id 0x%x\n", port_id);
return ERR_PTR(-EINVAL);
diff --git a/sound/soc/qcom/qdsp6/q6afe.h b/sound/soc/qcom/qdsp6/q6afe.h
index 5659966c6b1e..3cb3bb4985a9 100644
--- a/sound/soc/qcom/qdsp6/q6afe.h
+++ b/sound/soc/qcom/qdsp6/q6afe.h
@@ -11,6 +11,8 @@
#define MSM_AFE_PORT_TYPE_TX 1
#define AFE_MAX_PORTS AFE_PORT_MAX
+#define Q6AFE_MAX_MI2S_LINES 4
+
#define AFE_MAX_CHAN_COUNT 8
#define AFE_PORT_MAX_AUDIO_CHAN_CNT 0x8
@@ -29,9 +31,19 @@ struct q6afe_slim_cfg {
u8 ch_mapping[AFE_MAX_CHAN_COUNT];
};
+struct q6afe_i2s_cfg {
+ u32 sample_rate;
+ u16 bit_width;
+ u16 data_format;
+ u16 num_channels;
+ u32 sd_line_mask;
+ int fmt;
+};
+
struct q6afe_port_config {
struct q6afe_hdmi_cfg hdmi;
struct q6afe_slim_cfg slim;
+ struct q6afe_i2s_cfg i2s_cfg;
};
struct q6afe_port;
@@ -45,5 +57,6 @@ void q6afe_hdmi_port_prepare(struct q6afe_port *port,
struct q6afe_hdmi_cfg *cfg);
void q6afe_slim_port_prepare(struct q6afe_port *port,
struct q6afe_slim_cfg *cfg);
+int q6afe_i2s_port_prepare(struct q6afe_port *port, struct q6afe_i2s_cfg *cfg);
#endif /* __Q6AFE_H__ */
--
2.16.2
More information about the linux-arm-kernel
mailing list