[PATCH] clk: imx6ull: use OSC clock during AXI rate change

[Jacky Bai]

> Subject: Re: [PATCH] clk: imx6ull: use OSC clock during AXI rate change
> 
> Quoting Stefan Agner (2018-05-08 06:20:03)
> > On 08.05.2018 09:32, Jacky Bai wrote:
> > >
> > > I have tried two 6ULL board, I don't meet such issue. System can
> > > boot up successfully with commit 6f9575e55632 included.
> > > Anyway, the change in this patch is ok for me. it is no harm to the
> > > BUS clock change flow.
> >
> > Hm, that is interesting, maybe it is because we use a different SKU?
> > Or maybe bootloader?
> >
> > I tested here with a 800 MHz clocked variant on a Colibri iMX6ULL
> > using U-Boot 2016.11.
> >
> 
> I'll throw this into fixes today because it fixes something to be useful. It's still
> interesting to see what's different between the two setups though.

Thanks. 

I will find some 800MHz parts and have a try with different bootloader later.
Will let you know, when I have some results.

Jacky