coresight: documentation: update sysfs section

Kim Phillips kim.phillips at arm.com
Mon May 7 15:29:15 PDT 2018


- Align and show updated ls devices output from the TC2, based on
  current driver

- Provide an example from an ETMv4 based system (Juno)

- Reflect changes to the way the RAM write pointer is accessed since
  it got changed in commit 7d83d17795ef ("coresight: tmc: adding sysFS
  management entries").

Cc: Mathieu Poirier <mathieu.poirier at linaro.org>
Cc: Jonathan Corbet <corbet at lwn.net>
Signed-off-by: Kim Phillips <kim.phillips at arm.com>
---
 Documentation/trace/coresight.txt | 40 ++++++++++++++++++-------------
 1 file changed, 24 insertions(+), 16 deletions(-)

diff --git a/Documentation/trace/coresight.txt b/Documentation/trace/coresight.txt
index 6f0120c3a4f1..d23d6354b372 100644
--- a/Documentation/trace/coresight.txt
+++ b/Documentation/trace/coresight.txt
@@ -144,10 +144,21 @@ If everything goes well during the registration process the new devices will
 show up under /sys/bus/coresight/devices, as showns here for a TC2 platform:
 
 root:~# ls /sys/bus/coresight/devices/
-replicator  20030000.tpiu    2201c000.ptm  2203c000.etm  2203e000.etm
-20010000.etb         20040000.funnel  2201d000.ptm  2203d000.etm
+20010000.etb   20040000.funnel	2201d000.ptm  2203d000.etm  replicator
+20030000.tpiu  2201c000.ptm	2203c000.etm  2203e000.etm
 root:~#
 
+and here for a Juno platform:
+
+root at juno:~# ls /sys/bus/coresight/devices/
+20010000.etf	 20120000.replicator  22040000.etm     230c0000.funnel
+20030000.tpiu	 20130000.funnel      220c0000.funnel  23140000.etm
+20040000.funnel  20140000.etf	      22140000.etm     23240000.etm
+20070000.etr	 20150000.funnel      23040000.etm     23340000.etm
+root at juno:~# 
+
+Note the Juno uses an Embedded Trace Router (ETR) instead of an ETB.
+
 The functions take a "struct coresight_device", which looks like this:
 
 struct coresight_desc {
@@ -193,16 +204,16 @@ the information carried in "THIS_MODULE".
 How to use the tracer modules
 -----------------------------
 
-Before trace collection can start, a coresight sink needs to be identify.
+Before trace collection can start, a coresight sink needs to be identified.
 There is no limit on the amount of sinks (nor sources) that can be enabled at
 any given moment.  As a generic operation, all device pertaining to the sink
 class will have an "active" entry in sysfs:
 
 root:/sys/bus/coresight/devices# ls
-replicator  20030000.tpiu    2201c000.ptm  2203c000.etm  2203e000.etm
-20010000.etb         20040000.funnel  2201d000.ptm  2203d000.etm
+20010000.etb   20040000.funnel	2201d000.ptm  2203d000.etm  replicator
+20030000.tpiu  2201c000.ptm	2203c000.etm  2203e000.etm
 root:/sys/bus/coresight/devices# ls 20010000.etb
-enable_sink  status  trigger_cntr
+enable_sink  mgmt  power  subsystem  trigger_cntr  uevent
 root:/sys/bus/coresight/devices# echo 1 > 20010000.etb/enable_sink
 root:/sys/bus/coresight/devices# cat 20010000.etb/enable_sink
 1
@@ -216,16 +227,13 @@ trigger a trace capture:
 root:/sys/bus/coresight/devices# echo 1 > 2201c000.ptm/enable_source
 root:/sys/bus/coresight/devices# cat 2201c000.ptm/enable_source
 1
-root:/sys/bus/coresight/devices# cat 20010000.etb/status
-Depth:          0x2000
-Status:         0x1
-RAM read ptr:   0x0
-RAM wrt ptr:    0x19d3   <----- The write pointer is moving
-Trigger cnt:    0x0
-Control:        0x1
-Flush status:   0x0
-Flush ctrl:     0x2001
-root:/sys/bus/coresight/devices#
+
+Observe the write pointer moving:
+
+root:/sys/bus/coresight/devices# cat 20010000.etb/mgmt/rwp
+0x1a8
+root:/sys/bus/coresight/devices# cat 20010000.etb/mgmt/rwp
+0x19a6
 
 Trace collection is stopped the same way:
 
-- 
2.17.0




More information about the linux-arm-kernel mailing list