[PATCH 1/7] ARM: dts: gemini: Fix "debounce-interval" property misspelling
Linus Walleij
linus.walleij at linaro.org
Sun May 6 06:43:46 PDT 2018
From: Geert Uytterhoeven <geert+renesas at glider.be>
"debounce_interval" was never supported.
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
Cc: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
arch/arm/boot/dts/gemini-dlink-dir-685.dts | 4 ++--
arch/arm/boot/dts/gemini-dlink-dns-313.dts | 2 +-
arch/arm/boot/dts/gemini-nas4220b.dts | 4 ++--
arch/arm/boot/dts/gemini-rut1xx.dts | 2 +-
arch/arm/boot/dts/gemini-sq201.dts | 2 +-
arch/arm/boot/dts/gemini-wbd111.dts | 2 +-
arch/arm/boot/dts/gemini-wbd222.dts | 2 +-
7 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
index cadde92bc6b5..369c80076a61 100644
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -28,7 +28,7 @@
#address-cells = <1>;
#size-cells = <0>;
button-esc {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_ESC>;
label = "reset";
@@ -36,7 +36,7 @@
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
button-eject {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_EJECTCD>;
label = "unmount";
diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index 403364a7aab9..55b294f1675c 100644
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -34,7 +34,7 @@
#address-cells = <1>;
#size-cells = <0>;
button-esc {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_ESC>;
label = "reset";
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
index 4785fbcc41ed..465c26b53212 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -30,7 +30,7 @@
#size-cells = <0>;
button at 29 {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_SETUP>;
label = "Backup button";
@@ -38,7 +38,7 @@
gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
};
button at 31 {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_RESTART>;
label = "Softreset button";
diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts
index 15f20178642c..a2f14ee37599 100644
--- a/arch/arm/boot/dts/gemini-rut1xx.dts
+++ b/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -30,7 +30,7 @@
#size-cells = <0>;
button at 28 {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_SETUP>;
label = "Reset to defaults";
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts
index 63c02ca9513c..229c0267617a 100644
--- a/arch/arm/boot/dts/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini-sq201.dts
@@ -30,7 +30,7 @@
#size-cells = <0>;
button at 18 {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_SETUP>;
label = "factory reset";
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts
index b4ec9ad85d72..b31a9189083f 100644
--- a/arch/arm/boot/dts/gemini-wbd111.dts
+++ b/arch/arm/boot/dts/gemini-wbd111.dts
@@ -30,7 +30,7 @@
#size-cells = <0>;
button at 5 {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_SETUP>;
label = "reset";
diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts
index 6d25bcc046e7..0be867fbfc69 100644
--- a/arch/arm/boot/dts/gemini-wbd222.dts
+++ b/arch/arm/boot/dts/gemini-wbd222.dts
@@ -30,7 +30,7 @@
#size-cells = <0>;
button at 5 {
- debounce_interval = <50>;
+ debounce-interval = <50>;
wakeup-source;
linux,code = <KEY_SETUP>;
label = "reset";
--
2.17.0
More information about the linux-arm-kernel
mailing list