[PATCH v7 02/24] soc: qcom: Add APR bus driver
Bjorn Andersson
bjorn.andersson at linaro.org
Fri May 4 10:45:53 PDT 2018
On Tue 01 May 05:07 PDT 2018, Srinivas Kandagatla wrote:
> This patch adds support to APR bus (Asynchronous Packet Router) driver.
> APR driver is made as a bus driver so that the apr devices can added removed
> more dynamically depending on the state of the services on the dsp.
> APR is used for communication between application processor and QDSP to
> use services on QDSP like Audio and others.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
> Reviewed-and-tested-by: Rohit kumar <rohitkr at codeaurora.org>
> Acked-by: Andy Gross <andy.gross at linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson at linaro.org>
Regards,
Bjorn
> ---
> drivers/soc/qcom/Kconfig | 9 +
> drivers/soc/qcom/Makefile | 1 +
> drivers/soc/qcom/apr.c | 378 ++++++++++++++++++++++++++++++++++++++++
> include/linux/mod_devicetable.h | 11 ++
> include/linux/soc/qcom/apr.h | 128 ++++++++++++++
> 5 files changed, 527 insertions(+)
> create mode 100644 drivers/soc/qcom/apr.c
> create mode 100644 include/linux/soc/qcom/apr.h
>
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index 5c4535b545cc..d053f2634c67 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -108,4 +108,13 @@ config QCOM_WCNSS_CTRL
> Client driver for the WCNSS_CTRL SMD channel, used to download nv
> firmware to a newly booted WCNSS chip.
>
> +config QCOM_APR
> + tristate "Qualcomm APR Bus (Asynchronous Packet Router)"
> + depends on ARCH_QCOM
> + depends on RPMSG
> + help
> + Enable APR IPC protocol support between
> + application processor and QDSP6. APR is
> + used by audio driver to configure QDSP6
> + ASM, ADM and AFE modules.
> endmenu
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index dcebf2814e6d..39de5dee55d9 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -12,3 +12,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
> obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
> obj-$(CONFIG_QCOM_SMSM) += smsm.o
> obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
> +obj-$(CONFIG_QCOM_APR) += apr.o
> diff --git a/drivers/soc/qcom/apr.c b/drivers/soc/qcom/apr.c
> new file mode 100644
> index 000000000000..97f3622da535
> --- /dev/null
> +++ b/drivers/soc/qcom/apr.c
> @@ -0,0 +1,378 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2011-2017, The Linux Foundation. All rights reserved.
> +// Copyright (c) 2018, Linaro Limited
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/device.h>
> +#include <linux/spinlock.h>
> +#include <linux/idr.h>
> +#include <linux/slab.h>
> +#include <linux/of_device.h>
> +#include <linux/soc/qcom/apr.h>
> +#include <linux/rpmsg.h>
> +#include <linux/of.h>
> +
> +struct apr {
> + struct rpmsg_endpoint *ch;
> + struct device *dev;
> + spinlock_t svcs_lock;
> + struct idr svcs_idr;
> + int dest_domain_id;
> +};
> +
> +/**
> + * apr_send_pkt() - Send a apr message from apr device
> + *
> + * @adev: Pointer to previously registered apr device.
> + * @pkt: Pointer to apr packet to send
> + *
> + * Return: Will be an negative on packet size on success.
> + */
> +int apr_send_pkt(struct apr_device *adev, struct apr_pkt *pkt)
> +{
> + struct apr *apr = dev_get_drvdata(adev->dev.parent);
> + struct apr_hdr *hdr;
> + unsigned long flags;
> + int ret;
> +
> + spin_lock_irqsave(&adev->lock, flags);
> +
> + hdr = &pkt->hdr;
> + hdr->src_domain = APR_DOMAIN_APPS;
> + hdr->src_svc = adev->svc_id;
> + hdr->dest_domain = adev->domain_id;
> + hdr->dest_svc = adev->svc_id;
> +
> + ret = rpmsg_trysend(apr->ch, pkt, hdr->pkt_size);
> + spin_unlock_irqrestore(&adev->lock, flags);
> +
> + return ret ? ret : hdr->pkt_size;
> +}
> +EXPORT_SYMBOL_GPL(apr_send_pkt);
> +
> +static void apr_dev_release(struct device *dev)
> +{
> + struct apr_device *adev = to_apr_device(dev);
> +
> + kfree(adev);
> +}
> +
> +static int apr_callback(struct rpmsg_device *rpdev, void *buf,
> + int len, void *priv, u32 addr)
> +{
> + struct apr *apr = dev_get_drvdata(&rpdev->dev);
> + uint16_t hdr_size, msg_type, ver, svc_id;
> + struct apr_device *svc = NULL;
> + struct apr_driver *adrv = NULL;
> + struct apr_resp_pkt resp;
> + struct apr_hdr *hdr;
> + unsigned long flags;
> +
> + if (len <= APR_HDR_SIZE) {
> + dev_err(apr->dev, "APR: Improper apr pkt received:%p %d\n",
> + buf, len);
> + return -EINVAL;
> + }
> +
> + hdr = buf;
> + ver = APR_HDR_FIELD_VER(hdr->hdr_field);
> + if (ver > APR_PKT_VER + 1)
> + return -EINVAL;
> +
> + hdr_size = APR_HDR_FIELD_SIZE_BYTES(hdr->hdr_field);
> + if (hdr_size < APR_HDR_SIZE) {
> + dev_err(apr->dev, "APR: Wrong hdr size:%d\n", hdr_size);
> + return -EINVAL;
> + }
> +
> + if (hdr->pkt_size < APR_HDR_SIZE || hdr->pkt_size != len) {
> + dev_err(apr->dev, "APR: Wrong paket size\n");
> + return -EINVAL;
> + }
> +
> + msg_type = APR_HDR_FIELD_MT(hdr->hdr_field);
> + if (msg_type >= APR_MSG_TYPE_MAX && msg_type != APR_BASIC_RSP_RESULT) {
> + dev_err(apr->dev, "APR: Wrong message type: %d\n", msg_type);
> + return -EINVAL;
> + }
> +
> + if (hdr->src_domain >= APR_DOMAIN_MAX ||
> + hdr->dest_domain >= APR_DOMAIN_MAX ||
> + hdr->src_svc >= APR_SVC_MAX ||
> + hdr->dest_svc >= APR_SVC_MAX) {
> + dev_err(apr->dev, "APR: Wrong APR header\n");
> + return -EINVAL;
> + }
> +
> + svc_id = hdr->dest_svc;
> + spin_lock_irqsave(&apr->svcs_lock, flags);
> + svc = idr_find(&apr->svcs_idr, svc_id);
> + if (svc && svc->dev.driver)
> + adrv = to_apr_driver(svc->dev.driver);
> + spin_unlock_irqrestore(&apr->svcs_lock, flags);
> +
> + if (!adrv) {
> + dev_err(apr->dev, "APR: service is not registered\n");
> + return -EINVAL;
> + }
> +
> + resp.hdr = *hdr;
> + resp.payload_size = hdr->pkt_size - hdr_size;
> +
> + /*
> + * NOTE: hdr_size is not same as APR_HDR_SIZE as remote can include
> + * optional headers in to apr_hdr which should be ignored
> + */
> + if (resp.payload_size > 0)
> + resp.payload = buf + hdr_size;
> +
> + adrv->callback(svc, &resp);
> +
> + return 0;
> +}
> +
> +static int apr_device_match(struct device *dev, struct device_driver *drv)
> +{
> + struct apr_device *adev = to_apr_device(dev);
> + struct apr_driver *adrv = to_apr_driver(drv);
> + const struct apr_device_id *id = adrv->id_table;
> +
> + /* Attempt an OF style match first */
> + if (of_driver_match_device(dev, drv))
> + return 1;
> +
> + if (!id)
> + return 0;
> +
> + while (id->domain_id != 0 || id->svc_id != 0) {
> + if (id->domain_id == adev->domain_id &&
> + id->svc_id == adev->svc_id)
> + return 1;
> + id++;
> + }
> +
> + return 0;
> +}
> +
> +static int apr_device_probe(struct device *dev)
> +{
> + struct apr_device *adev = to_apr_device(dev);
> + struct apr_driver *adrv = to_apr_driver(dev->driver);
> +
> + return adrv->probe(adev);
> +}
> +
> +static int apr_device_remove(struct device *dev)
> +{
> + struct apr_device *adev = to_apr_device(dev);
> + struct apr_driver *adrv;
> + struct apr *apr = dev_get_drvdata(adev->dev.parent);
> +
> + if (dev->driver) {
> + adrv = to_apr_driver(dev->driver);
> + if (adrv->remove)
> + adrv->remove(adev);
> + spin_lock(&apr->svcs_lock);
> + idr_remove(&apr->svcs_idr, adev->svc_id);
> + spin_unlock(&apr->svcs_lock);
> + }
> +
> + return 0;
> +}
> +
> +static int apr_uevent(struct device *dev, struct kobj_uevent_env *env)
> +{
> + struct apr_device *adev = to_apr_device(dev);
> + int ret;
> +
> + ret = of_device_uevent_modalias(dev, env);
> + if (ret != -ENODEV)
> + return ret;
> +
> + return add_uevent_var(env, "MODALIAS=apr:%s", adev->name);
> +}
> +
> +struct bus_type aprbus = {
> + .name = "aprbus",
> + .match = apr_device_match,
> + .probe = apr_device_probe,
> + .uevent = apr_uevent,
> + .remove = apr_device_remove,
> +};
> +EXPORT_SYMBOL_GPL(aprbus);
> +
> +static int apr_add_device(struct device *dev, struct device_node *np,
> + const struct apr_device_id *id)
> +{
> + struct apr *apr = dev_get_drvdata(dev);
> + struct apr_device *adev = NULL;
> + int ret;
> +
> + adev = kzalloc(sizeof(*adev), GFP_KERNEL);
> + if (!adev)
> + return -ENOMEM;
> +
> + spin_lock_init(&adev->lock);
> +
> + adev->svc_id = id->svc_id;
> + adev->domain_id = id->domain_id;
> + adev->version = id->svc_version;
> + if (np)
> + strncpy(adev->name, np->name, APR_NAME_SIZE);
> + else
> + strncpy(adev->name, id->name, APR_NAME_SIZE);
> +
> + dev_set_name(&adev->dev, "aprsvc:%s:%x:%x", adev->name,
> + id->domain_id, id->svc_id);
> +
> + adev->dev.bus = &aprbus;
> + adev->dev.parent = dev;
> + adev->dev.of_node = np;
> + adev->dev.release = apr_dev_release;
> + adev->dev.driver = NULL;
> +
> + spin_lock(&apr->svcs_lock);
> + idr_alloc(&apr->svcs_idr, adev, id->svc_id,
> + id->svc_id + 1, GFP_ATOMIC);
> + spin_unlock(&apr->svcs_lock);
> +
> + dev_info(dev, "Adding APR dev: %s\n", dev_name(&adev->dev));
> +
> + ret = device_register(&adev->dev);
> + if (ret) {
> + dev_err(dev, "device_register failed: %d\n", ret);
> + put_device(&adev->dev);
> + }
> +
> + return ret;
> +}
> +
> +static void of_register_apr_devices(struct device *dev)
> +{
> + struct apr *apr = dev_get_drvdata(dev);
> + struct device_node *node;
> +
> + for_each_child_of_node(dev->of_node, node) {
> + struct apr_device_id id = { {0} };
> +
> + if (of_property_read_u32(node, "reg", &id.svc_id))
> + continue;
> +
> + id.domain_id = apr->dest_domain_id;
> +
> + if (apr_add_device(dev, node, &id))
> + dev_err(dev, "Failed to add apr %d svc\n", id.svc_id);
> + }
> +}
> +
> +static int apr_probe(struct rpmsg_device *rpdev)
> +{
> + struct device *dev = &rpdev->dev;
> + struct apr *apr;
> + int ret;
> +
> + apr = devm_kzalloc(dev, sizeof(*apr), GFP_KERNEL);
> + if (!apr)
> + return -ENOMEM;
> +
> + ret = of_property_read_u32(dev->of_node, "reg", &apr->dest_domain_id);
> + if (ret) {
> + dev_err(dev, "APR Domain ID not specified in DT\n");
> + return ret;
> + }
> +
> + dev_set_drvdata(dev, apr);
> + apr->ch = rpdev->ept;
> + apr->dev = dev;
> + spin_lock_init(&apr->svcs_lock);
> + idr_init(&apr->svcs_idr);
> + of_register_apr_devices(dev);
> +
> + return 0;
> +}
> +
> +static int apr_remove_device(struct device *dev, void *null)
> +{
> + struct apr_device *adev = to_apr_device(dev);
> +
> + device_unregister(&adev->dev);
> +
> + return 0;
> +}
> +
> +static void apr_remove(struct rpmsg_device *rpdev)
> +{
> + device_for_each_child(&rpdev->dev, NULL, apr_remove_device);
> +}
> +
> +/*
> + * __apr_driver_register() - Client driver registration with aprbus
> + *
> + * @drv:Client driver to be associated with client-device.
> + * @owner: owning module/driver
> + *
> + * This API will register the client driver with the aprbus
> + * It is called from the driver's module-init function.
> + */
> +int __apr_driver_register(struct apr_driver *drv, struct module *owner)
> +{
> + drv->driver.bus = &aprbus;
> + drv->driver.owner = owner;
> +
> + return driver_register(&drv->driver);
> +}
> +EXPORT_SYMBOL_GPL(__apr_driver_register);
> +
> +/*
> + * apr_driver_unregister() - Undo effect of apr_driver_register
> + *
> + * @drv: Client driver to be unregistered
> + */
> +void apr_driver_unregister(struct apr_driver *drv)
> +{
> + driver_unregister(&drv->driver);
> +}
> +EXPORT_SYMBOL_GPL(apr_driver_unregister);
> +
> +static const struct of_device_id apr_of_match[] = {
> + { .compatible = "qcom,apr"},
> + { .compatible = "qcom,apr-v2"},
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, apr_of_match);
> +
> +static struct rpmsg_driver apr_driver = {
> + .probe = apr_probe,
> + .remove = apr_remove,
> + .callback = apr_callback,
> + .drv = {
> + .name = "qcom,apr",
> + .of_match_table = apr_of_match,
> + },
> +};
> +
> +static int __init apr_init(void)
> +{
> + int ret;
> +
> + ret = bus_register(&aprbus);
> + if (!ret)
> + ret = register_rpmsg_driver(&apr_driver);
> + else
> + bus_unregister(&aprbus);
> +
> + return ret;
> +}
> +
> +static void __exit apr_exit(void)
> +{
> + bus_unregister(&aprbus);
> + unregister_rpmsg_driver(&apr_driver);
> +}
> +
> +subsys_initcall(apr_init);
> +module_exit(apr_exit);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Qualcomm APR Bus");
> diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
> index 7d361be2e24f..2014bd19f28e 100644
> --- a/include/linux/mod_devicetable.h
> +++ b/include/linux/mod_devicetable.h
> @@ -471,6 +471,17 @@ struct slim_device_id {
> kernel_ulong_t driver_data;
> };
>
> +#define APR_NAME_SIZE 32
> +#define APR_MODULE_PREFIX "apr:"
> +
> +struct apr_device_id {
> + char name[APR_NAME_SIZE];
> + __u32 domain_id;
> + __u32 svc_id;
> + __u32 svc_version;
> + kernel_ulong_t driver_data; /* Data private to the driver */
> +};
> +
> #define SPMI_NAME_SIZE 32
> #define SPMI_MODULE_PREFIX "spmi:"
>
> diff --git a/include/linux/soc/qcom/apr.h b/include/linux/soc/qcom/apr.h
> new file mode 100644
> index 000000000000..c5d52e2cb275
> --- /dev/null
> +++ b/include/linux/soc/qcom/apr.h
> @@ -0,0 +1,128 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#ifndef __QCOM_APR_H_
> +#define __QCOM_APR_H_
> +
> +#include <linux/spinlock.h>
> +#include <linux/device.h>
> +#include <linux/mod_devicetable.h>
> +#include <dt-bindings/soc/qcom,apr.h>
> +
> +extern struct bus_type aprbus;
> +
> +#define APR_HDR_LEN(hdr_len) ((hdr_len)/4)
> +
> +/*
> + * HEADER field
> + * version:0:3
> + * header_size : 4:7
> + * message_type : 8:9
> + * reserved: 10:15
> + */
> +#define APR_HDR_FIELD(msg_type, hdr_len, ver)\
> + (((msg_type & 0x3) << 8) | ((hdr_len & 0xF) << 4) | (ver & 0xF))
> +
> +#define APR_HDR_SIZE sizeof(struct apr_hdr)
> +#define APR_SEQ_CMD_HDR_FIELD APR_HDR_FIELD(APR_MSG_TYPE_SEQ_CMD, \
> + APR_HDR_LEN(APR_HDR_SIZE), \
> + APR_PKT_VER)
> +/* Version */
> +#define APR_PKT_VER 0x0
> +
> +/* Command and Response Types */
> +#define APR_MSG_TYPE_EVENT 0x0
> +#define APR_MSG_TYPE_CMD_RSP 0x1
> +#define APR_MSG_TYPE_SEQ_CMD 0x2
> +#define APR_MSG_TYPE_NSEQ_CMD 0x3
> +#define APR_MSG_TYPE_MAX 0x04
> +
> +/* APR Basic Response Message */
> +#define APR_BASIC_RSP_RESULT 0x000110E8
> +#define APR_RSP_ACCEPTED 0x000100BE
> +
> +struct aprv2_ibasic_rsp_result_t {
> + uint32_t opcode;
> + uint32_t status;
> +};
> +
> +/* hdr field Ver [0:3], Size [4:7], Message type [8:10] */
> +#define APR_HDR_FIELD_VER(h) (h & 0x000F)
> +#define APR_HDR_FIELD_SIZE(h) ((h & 0x00F0) >> 4)
> +#define APR_HDR_FIELD_SIZE_BYTES(h) (((h & 0x00F0) >> 4) * 4)
> +#define APR_HDR_FIELD_MT(h) ((h & 0x0300) >> 8)
> +
> +struct apr_hdr {
> + uint16_t hdr_field;
> + uint16_t pkt_size;
> + uint8_t src_svc;
> + uint8_t src_domain;
> + uint16_t src_port;
> + uint8_t dest_svc;
> + uint8_t dest_domain;
> + uint16_t dest_port;
> + uint32_t token;
> + uint32_t opcode;
> +} __packed;
> +
> +struct apr_pkt {
> + struct apr_hdr hdr;
> + uint8_t payload[];
> +};
> +
> +struct apr_resp_pkt {
> + struct apr_hdr hdr;
> + void *payload;
> + int payload_size;
> +};
> +
> +/* Bits 0 to 15 -- Minor version, Bits 16 to 31 -- Major version */
> +#define APR_SVC_MAJOR_VERSION(v) ((v >> 16) & 0xFF)
> +#define APR_SVC_MINOR_VERSION(v) (v & 0xFF)
> +
> +struct apr_device {
> + struct device dev;
> + uint16_t svc_id;
> + uint16_t domain_id;
> + uint32_t version;
> + char name[APR_NAME_SIZE];
> + spinlock_t lock;
> + struct list_head node;
> +};
> +
> +#define to_apr_device(d) container_of(d, struct apr_device, dev)
> +
> +struct apr_driver {
> + int (*probe)(struct apr_device *sl);
> + int (*remove)(struct apr_device *sl);
> + int (*callback)(struct apr_device *a,
> + struct apr_resp_pkt *d);
> + struct device_driver driver;
> + const struct apr_device_id *id_table;
> +};
> +
> +#define to_apr_driver(d) container_of(d, struct apr_driver, driver)
> +
> +/*
> + * use a macro to avoid include chaining to get THIS_MODULE
> + */
> +#define apr_driver_register(drv) __apr_driver_register(drv, THIS_MODULE)
> +
> +int __apr_driver_register(struct apr_driver *drv, struct module *owner);
> +void apr_driver_unregister(struct apr_driver *drv);
> +
> +/**
> + * module_apr_driver() - Helper macro for registering a aprbus driver
> + * @__aprbus_driver: aprbus_driver struct
> + *
> + * Helper macro for aprbus drivers which do not do anything special in
> + * module init/exit. This eliminates a lot of boilerplate. Each module
> + * may only use this macro once, and calling it replaces module_init()
> + * and module_exit()
> + */
> +#define module_apr_driver(__apr_driver) \
> + module_driver(__apr_driver, apr_driver_register, \
> + apr_driver_unregister)
> +
> +int apr_send_pkt(struct apr_device *adev, struct apr_pkt *pkt);
> +
> +#endif /* __QCOM_APR_H_ */
> --
> 2.16.2
>
More information about the linux-arm-kernel
mailing list