[PATCH 1/2] ARM: dts: imx6sx-sabreauto: drop 'regulators' container node

[Shawn Guo]

Hi Anson,

I will push these two patches to imx/dt branch soon.  Please base your
imx6sx-sabreauto dts patches on them.

Shawn

On Fri, May 04, 2018 at 05:27:09PM +0800, Shawn Guo wrote:
> Let's drop the 'regulators' container node by giving VCC_SD3 an unique
> name and removing 'reg' property, so that the fixed regulator can be
> under root node directly.
> 
> Signed-off-by: Shawn Guo <shawnguo at kernel.org>
> ---
>  arch/arm/boot/dts/imx6sx-sabreauto.dts | 25 +++++++++----------------
>  1 file changed, 9 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
> index 57d1ea0a3f8e..e5c1d6daa5e0 100644
> --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
> +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
> @@ -18,22 +18,15 @@
>  		reg = <0x80000000 0x80000000>;
>  	};
>  
> -	regulators {
> -		compatible = "simple-bus";
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		vcc_sd3: regulator at 0 {
> -			compatible = "regulator-fixed";
> -			reg = <0>;
> -			pinctrl-names = "default";
> -			pinctrl-0 = <&pinctrl_vcc_sd3>;
> -			regulator-name = "VCC_SD3";
> -			regulator-min-microvolt = <3000000>;
> -			regulator-max-microvolt = <3000000>;
> -			gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
> -			enable-active-high;
> -		};
> +	vcc_sd3: regulator-vcc-sd3 {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_vcc_sd3>;
> +		regulator-name = "VCC_SD3";
> +		regulator-min-microvolt = <3000000>;
> +		regulator-max-microvolt = <3000000>;
> +		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
>  	};
>  };
>  
> -- 
> 1.9.1
>