[PATCH v2] tty/serial: atmel: use port->name as name in request_irq()

Sebastian Andrzej Siewior bigeasy at linutronix.de
Fri May 4 01:14:47 PDT 2018


I was puzzled while looking at /proc/interrupts and random things showed
up between reboots. This occurred more often but I realised it later. The
"correct" output should be:
|38:      11861  atmel-aic5   2 Level     ttyS0

but I saw sometimes
|38:       6426  atmel-aic5   2 Level     tty1

and accounted it wrongly as correct. This is use after free and the
former example randomly got the "old" pointer which pointed to the same
content. With SLAB_FREELIST_RANDOM and HARDENED I even got
|38:       7067  atmel-aic5   2 Level     E=Started User Manager for UID 0

or other nonsense.
As it turns out the tty, pointer that is accessed in atmel_startup(), is
freed() before atmel_shutdown(). It seems to happen quite often that the
tty for ttyS0 is allocated and freed while ->shutdown is not invoked. I
don't do anything special - just a systemd boot :)

Use port->name as the IRQ name for request_irq(). This exists as long as
the driver is loaded so no use-after-free here.
For backports before v4.12 I suggest to use `"atmel_serial"' instead
`port->name' (that member was introduced in f7048b15900f ("tty: serial_core:
Add name field to uart_port struct").

Cc: stable at vger.kernel.org
Fixes: 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>
---
v1…v2: - Bisected and added a Fixes tag
       - added a note for backporters to v4.9 … v4.12 (pointed out by
	 Richard Genoud)

 drivers/tty/serial/atmel_serial.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index e287fe8f10fc..d3189816740e 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1757,7 +1757,6 @@ static int atmel_startup(struct uart_port *port)
 {
 	struct platform_device *pdev = to_platform_device(port->dev);
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-	struct tty_struct *tty = port->state->port.tty;
 	int retval;
 
 	/*
@@ -1772,8 +1771,7 @@ static int atmel_startup(struct uart_port *port)
 	 * Allocate the IRQ
 	 */
 	retval = request_irq(port->irq, atmel_interrupt,
-			IRQF_SHARED | IRQF_COND_SUSPEND,
-			tty ? tty->name : "atmel_serial", port);
+			     IRQF_SHARED | IRQF_COND_SUSPEND, port->name, port);
 	if (retval) {
 		dev_err(port->dev, "atmel_startup - Can't get irq\n");
 		return retval;
-- 
2.17.0




More information about the linux-arm-kernel mailing list