[PATCH 3/4] dt-bindings: arm: fsl: add scu binding doc

Rob Herring robh at kernel.org
Tue May 1 08:29:01 PDT 2018


On Sat, Apr 28, 2018 at 02:46:15AM +0800, Dong Aisheng wrote:
> The System Controller Firmware (SCFW) is a low-level system function
> which runs on a dedicated Cortex-M core to provide power, clock, and
> resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
> (QM, QP), and i.MX8QX (QXP, DX).
> 
> Cc: Shawn Guo <shawnguo at kernel.org>
> Cc: Sascha Hauer <kernel at pengutronix.de>
> Cc: Fabio Estevam <fabio.estevam at nxp.com>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Mark Rutland <mark.rutland at arm.com>
> Cc: devicetree at vger.kernel.org
> Signed-off-by: Dong Aisheng <aisheng.dong at nxp.com>
> ---
>  .../devicetree/bindings/arm/freescale/fsl,scu.txt  | 40 ++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> new file mode 100644
> index 0000000..3b51d82
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> @@ -0,0 +1,40 @@
> +NXP i.MX System Controller Firmware (SCFW)
> +--------------------------------------------------------------------
> +
> +The System Controller Firmware (SCFW) is a low-level system function
> +which runs on a dedicated Cortex-M core to provide power, clock, and
> +resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
> +(QM, QP), and i.MX8QX (QXP, DX).
> +
> +The AP communicates with the SC using a multi-ported MU module found
> +in the LSIO subsystem. The current definition of this MU module provides
> +5 remote AP connections to the SC to support up to 5 execution environments
> +(TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
> +with the LSIO DSC IP bus. The SC firmware will communicate with this MU
> +using the MSI bus.
> +
> +System Controller Device Node:
> +=============================
> +
> +Required properties:
> +-------------------
> +- compatible: should be "fsl,imx8qxp-scu" or "fsl,imx8qm-scu"
> +- fsl,mu: a phandle to the Message Unit used by SCU. Should be

Use the mailbox binding.

> +	  one of LSIO MU0~M4 for imx8qxp and imx8qm. Users need
> +	  to make sure not use the one which is conflict with
> +	  other execution environments. e.g. ATF.
> +
> +Examples:
> +--------
> +lsio_mu0: mu at 5d1b0000 {
> +	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
> +	reg = <0x0 0x5d1b0000 0x0 0x10000>;
> +	interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
> +	status = "okay";
> +};
> +
> +scu {
> +	compatible = "fsl,imx8qxp-scu";
> +	fsl,mu = <&lsio_mu0>;
> +	status = "okay";

Don't show status in examples.

> +};
> -- 
> 2.7.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



More information about the linux-arm-kernel mailing list