[RESEND PATCH v2 4/8] mfd: stm32-timers: add support for dmas

[Lee Jones]

On Thu, 29 Mar 2018, Fabrice Gasnier wrote:

> On 03/29/2018 02:59 PM, Lee Jones wrote:
> > On Wed, 28 Mar 2018, Fabrice Gasnier wrote:
> > 
> >> On 03/28/2018 05:22 PM, Lee Jones wrote:
> >>> On Wed, 14 Feb 2018, Fabrice Gasnier wrote:
> >>>
> >>>> STM32 Timers can support up to 7 DMA requests:
> >>>> - 4 channels, update, compare and trigger.
> >>>> Optionally request part, or all DMAs from stm32-timers MFD core.
> >>>>
> >>>> Also add routine to implement burst reads using DMA from timer registers.
> >>>> This is exported. So, it can be used by child drivers, PWM capture
> >>>> for instance (but not limited to).
> >>>>
> >>>> Signed-off-by: Fabrice Gasnier <fabrice.gasnier at st.com>
> >>>> Reviewed-by: Benjamin Gaignard <benjamin.gaignard at linaro.org>
> >>>> ---
> >>>> Changes in v2:
> >>>> - Abstract DMA handling from child driver: move it to MFD core
> >>>> - Add comments on optional dma support
> >>>> ---
> >>>>  drivers/mfd/stm32-timers.c       | 215 ++++++++++++++++++++++++++++++++++++++-
> >>>>  include/linux/mfd/stm32-timers.h |  27 +++++
> >>>>  2 files changed, 238 insertions(+), 4 deletions(-)
> >>>>
> >>>> diff --git a/drivers/mfd/stm32-timers.c b/drivers/mfd/stm32-timers.c
> >>>> index a6675a4..2cdad2c 100644
> >>>> --- a/drivers/mfd/stm32-timers.c
> >>>> +++ b/drivers/mfd/stm32-timers.c
> > 
> > [...]
> > 
> >>>> +	struct dma_chan *dmas[STM32_TIMERS_MAX_DMAS];
> >>>> +	struct stm32_timers ddata;
> >>>
> >>> This looks odd to me.  Why can't you expand the current ddata
> >>> structure?  Wouldn't it be better to create a stm32_timers_dma
> >>> structure to place all this information in (except *dev, that should
> >>> live in the ddata struct), then place a reference in the existing
> >>> stm32_timers struct?
> >>
> >> Maybe I miss-understand you here, from what we discussed in V1:
> >> https://lkml.org/lkml/2018/1/23/574
> >>> ... "passing in the physical address of the parent MFD into
> >>> a child device doesn't quite sit right with me"
> >> I introduced this private struct in MFD parent, and completely hide it
> >> from the child.
> >>
> >> So, do you suggest to add struct definition here ? But make it part of
> >> struct stm32_timers *ddata?
> >>
> >> And only put declaration in include/linux/mfd/stm32-timers.h:
> >> + struct stm32_timers_dma;
> >>
> >> struct stm32_timers {
> >> 	struct clk *clk;
> >> 	struct regmap *regmap;
> >> 	u32 max_arr;
> >> +	struct stm32_timers_dma;
> >> };
> > 
> > Yes, that's the basic idea.
> > 
> >> I can probably spare the *dev then... use dev->parent in child driver.
> > 
> > What would you use dev->parent for?
> 
> Hi Lee,
> 
> This is to follow your sugestion to use *dev instead of *ddata when
> calling stm32_timers_dma_burst_read(), the idea is to use it on child side:
> stm32_timers_dma_burst_read(dev->parent,...) from pwm driver.
> Then there is no need to keep *dev inside ddata struct.

I'm wondering if it would be neater to us the child's *dev, then do
the ->parent deference in the parent MFD (with a comment to say what
you're doing of course).

> > [...]
> > 
> >>>> +static int stm32_timers_remove(struct platform_device *pdev)
> >>>> +{
> >>>> +	struct stm32_timers *ddata = platform_get_drvdata(pdev);
> >>>> +	struct stm32_timers_priv *priv = to_stm32_timers_priv(ddata);
> >>>> +
> >>>> +	of_platform_depopulate(&pdev->dev);
> >>>
> >>> Why can't you continue using devm_*?
> >>
> >> I can use devm_of_platform_depopulate() here if you prefer, and keep
> >> devm_of_platform_populate() in probe.
> > 
> > The point of devm_* is that you don't have to call depopulate.
> > 
> > It happens automatically once this driver is unbound.
> 
> Ok, so to clarify, keeping devm_ here may be a bit racy:
> of_platform_depopulate will happen after dma has been released (there is
> no devm_ variant to release dma).
> Only way to prevent race condition here, is to enforce
> of_platform_depopulate() is called before dma release (e.g. in reverse
> order compared to probe).
> 
> Do you wish I add a comment about it ?

Best thing to do then is keep the non-devm variant and provide a
comment as to why is it not possible to use devm_*.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog