[PATCH] pinctrl: msm: fix gpio-hog related boot issues
Christian Lamparter
chunkeey at gmail.com
Wed Mar 28 11:07:05 PDT 2018
Sven Eckelmann reported an issue with the current IPQ4019 pinctrl.
Setting up any gpio-hog in the device-tree for his device would
"kill the bootup completely":
| [ 0.477838] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl at 1000000/serial_pinmux, deferring probe
| [ 0.499828] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl at 1000000/spi_0_pinmux, deferring probe
| [ 1.298883] requesting hog GPIO enable USB2 power (chip 1000000.pinctrl, offset 58) failed, -517
| [ 1.299609] gpiochip_add_data: GPIOs 0..99 (1000000.pinctrl) failed to register
| [ 1.308589] ipq4019-pinctrl 1000000.pinctrl: Failed register gpiochip
| [ 1.316586] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl at 1000000/serial_pinmux, deferring probe
| [ 1.322415] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl at 1000000/spi_0_pinmux, deferri
This was also verified on a RT-AC58U (IPQ4018) which would
no longer boot, if a gpio-hog was specified. (Tried forcing
the USB LED PIN (GPIO0) to high.).
The problem is that Pinctrl+GPIO registration is currently
peformed in the following order in pinctrl-msm.c:
1. pinctrl_register()
2. gpiochip_add()
3. gpiochip_add_pin_range()
The actual error code -517 == -EPROBE_DEFER is coming from
pinctrl_get_device_gpio_range(), which is called through:
gpiochip_add
of_gpiochip_add
of_gpiochip_scan_gpios
gpiod_hog
gpiochip_request_own_desc
__gpiod_request
chip->request
gpiochip_generic_request
pinctrl_gpio_request
pinctrl_get_device_gpio_range
pinctrl_get_device_gpio_range() is unable to find any valid
pin ranges, since nothing has been added to the pinctrldev_list yet.
so the range can't be found, and the operation fails with -EPROBE_DEFER.
This patch fixes the issue by adding the "gpio-ranges" property
to the pinctrl device node of all upstream Qcom SoC, so the
ranges are added by of_gpiochip_add_pin_range(), which is
called by of_gpiochip_add() before the call to
of_gpiochip_scan_gpios() happens.gpiochip_add_pin_range() is longer
needed and removed (to prevent adding the same entry to the
pinctrldev_list twice).
Cc: stable at vger.kernel.org
Reported-by: Sven Eckelmann <sven.eckelmann at openmesh.com>
Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
---
The msm8998 would need something like
gpio-ranges = <&tlmm 0 0 150>;
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 1 +
arch/arm/boot/dts/qcom-apq8084.dtsi | 1 +
arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 +
arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 +
arch/arm/boot/dts/qcom-mdm9615.dtsi | 1 +
arch/arm/boot/dts/qcom-msm8660.dtsi | 1 +
arch/arm/boot/dts/qcom-msm8960.dtsi | 1 +
arch/arm/boot/dts/qcom-msm8974.dtsi | 1 +
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 3 ++-
arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 +
arch/arm64/boot/dts/qcom/msm8992.dtsi | 1 +
arch/arm64/boot/dts/qcom/msm8994.dtsi | 1 +
arch/arm64/boot/dts/qcom/msm8996.dtsi | 1 +
drivers/pinctrl/qcom/pinctrl-msm.c | 7 -------
14 files changed, 14 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 3ca96e361878..17ad9cbd9f8c 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -327,6 +327,7 @@
reg = <0x800000 0x4000>;
gpio-controller;
+ gpio-ranges = <&tlmm_pinmux 0 0 90>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 0e1e98707e3f..d9481d083802 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -396,6 +396,7 @@
compatible = "qcom,apq8084-pinctrl";
reg = <0xfd510000 0x4000>;
gpio-controller;
+ gpio-ranges = <&tlmm 0 0 147>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index c1e65aaf3cad..d85b15774c64 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -147,6 +147,7 @@
compatible = "qcom,ipq4019-pinctrl";
reg = <0x01000000 0x300000>;
gpio-controller;
+ gpio-ranges = <&tlmm 0 0 100>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 1e0a3b446f7a..26eab9a68d90 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -108,6 +108,7 @@
reg = <0x800000 0x4000>;
gpio-controller;
+ gpio-ranges = <&qcom_pinmux 0 0 69>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index c852b69229c9..cfdaca5f259a 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -128,6 +128,7 @@
msmgpio: pinctrl at 800000 {
compatible = "qcom,mdm9615-pinctrl";
gpio-controller;
+ gpio-ranges = <&msmgpio 0 0 88>;
#gpio-cells = <2>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 33030f9419fe..47cf9c4ca062 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -110,6 +110,7 @@
reg = <0x800000 0x4000>;
gpio-controller;
+ gpio-ranges = <&tlmm 0 0 173>;
#gpio-cells = <2>;
interrupts = <0 16 0x4>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 1733d8f40ab1..f6d8b1af5a8a 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -102,6 +102,7 @@
msmgpio: pinctrl at 800000 {
compatible = "qcom,msm8960-pinctrl";
gpio-controller;
+ gpio-ranges = <&msmgpio 0 0 152>;
#gpio-cells = <2>;
interrupts = <0 16 0x4>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index d9019a49b292..1250e071a6e2 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -696,6 +696,7 @@
compatible = "qcom,msm8974-pinctrl";
reg = <0xfd510000 0x4000>;
gpio-controller;
+ gpio-ranges = <&msmgpio 0 0 146>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 2bc5dec5614d..d2c36b467466 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -24,11 +24,12 @@
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
- pinctrl at 1000000 {
+ tlmm: pinctrl at 1000000 {
compatible = "qcom,ipq8074-pinctrl";
reg = <0x1000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
+ gpio-ranges = <&tlmm 0 0 70>;
#gpio-cells = <0x2>;
interrupt-controller;
#interrupt-cells = <0x2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index e51b04900726..e06cb90c8ec3 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -281,6 +281,7 @@
reg = <0x1000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
+ gpio-ranges = <&msmgpio 0 0 122>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 171578747ed0..173b6bc60816 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -179,6 +179,7 @@
reg = <0xfd510000 0x4000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
+ gpio-ranges = <&msmgpio 0 0 146>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index f33c41d01c86..68705db4696b 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -141,6 +141,7 @@
reg = <0xfd510000 0x4000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
+ gpio-ranges = <&msmgpio 0 0 146>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 0a6f7952bbb1..18511e782cbd 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -530,6 +530,7 @@
reg = <0x01010000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
+ gpio-ranges = <&msmgpio 0 0 150>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 495432f3341b..f2580bbba741 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -831,13 +831,6 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl)
return ret;
}
- ret = gpiochip_add_pin_range(&pctrl->chip, dev_name(pctrl->dev), 0, 0, chip->ngpio);
- if (ret) {
- dev_err(pctrl->dev, "Failed to add pin range\n");
- gpiochip_remove(&pctrl->chip);
- return ret;
- }
-
ret = gpiochip_irqchip_add(chip,
&msm_gpio_irq_chip,
0,
--
2.16.3
More information about the linux-arm-kernel
mailing list