[PATCH v3 3/3] ARM64: dts: meson: fix clock source of the pclk for UART_AO

[Yixun Lan]

>From the hardware perspective, the actual pclk of the AO uarts
is the corresponding clkc_ao uart gate, not the main clock controller clk81.
This was not problem so far, because the uart_gate had
the CLK_IGNORE_UNUSED flag, which kept the gate open.

We plan to remove the CLK_IGNORE_UNUSED flag in another patch,
but before doing that, we need to fix the clock in the DTS file.

Signed-off-by: Yixun Lan <yixun.lan at amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi  | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 4 ++--
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 40ca49fb94a6..dc6ca0895f11 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -798,7 +798,7 @@
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 				reg = <0x0 0x3000 0x0 0x18>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
@@ -807,7 +807,7 @@
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 				reg = <0x0 0x4000 0x0 0x18>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 562c26a0ba33..ea6898f62044 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -749,12 +749,12 @@
 };
 
 &uart_AO {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_AO_B {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index e1a39cbed8c9..472106ce9a75 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -697,12 +697,12 @@
 };
 
 &uart_AO {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_AO_B {
-	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
-- 
2.15.1