[PATCHv3 3/7] driver, misc: add Intel Stratix10 service layer driver
richard.gong at linux.intel.com
richard.gong at linux.intel.com
Tue Mar 27 13:20:10 PDT 2018
From: Richard Gong <richard.gong at intel.com>
Intel Stratix10 SoC is composed of a 64 bit quad-core ARM Cortex A53 hard
processor system (HPS) and Secure Device Manager (SDM). SDM is the
hardware which does the FPGA configuration, QSPI, Crypto and warm reset.
In order to configure the FPGA from HPS, there needs to be a way for HPS to
notify SDM the location and size of the configuration data. Then SDM will
get the configuration data from that location and perform the FPGA
configuration.
To meet the whole system security needs and support virtual machine
requesting communication with SDM, only the secure world of software (EL3,
Exception Level 3) can interface with SDM. All software entities running
on other exception levels must channel through the EL3 software whenever
it needs service from SDM.
Intel Stratix10 service layer driver is added to provide the service for
FPGA configuration. Running at privileged exception level (EL1, Exception
Level 1), Intel Stratix10 service layer driver interfaces with the service
provider at EL1 (Intel Stratix10 FPGA Manager) and manages secure monitor
call (SMC) to communicate with secure monitor software at secure monitor
exception level (EL3).
Header file intel-service-client.h defines the interface between service
providers (FPGA manager is one of them) and service layer.
Header file intel-smc.h defines the secure monitor call (SMC)
message protocols used for service layer driver in normal world
(EL1) to communicate with secure monitor SW in secure monitor exception
level 3 (EL3). This file is shared with secure firmware (FW) which is
out of kernel tree.
Signed-off-by: Richard Gong <richard.gong at intel.com>
Signed-off-by: Alan Tull <atull at kernel.org>
---
v2: Remove intel-service subdirectory and intel-service.h, move
intel-smc.h and intel-service.c to driver/misc subdirectory
Correct SPDX markers
Change service layer driver be 'default n'
Remove global variables
Add timeout for do..while() loop
Add kernel-doc for the functions and structs, correct multiline comments
Replace kfifo_in/kfifo_out with kfifo_in_spinlocked/kfifo_out_spinlocked
rename struct intel_svc_data (at client header) to intel_svc_client_msg
rename struct intel_svc_private_mem to intel_svc_data
Other corrections/changes from Intel internal code reviews
v3: Change all exported functions with "intel_svc_" as the prefix
Increase timeout values for claiming back submitted buffer(s)
Rename struct intel_command_reconfig_payload to
struct intel_svc_command_reconfig_payload
Add pr_err() to provide the error return value
Other corrections/changes
---
drivers/misc/Kconfig | 12 +
drivers/misc/Makefile | 1 +
drivers/misc/intel-service.c | 962 +++++++++++++++++++++++++++++++++++
drivers/misc/intel-smc.h | 205 ++++++++
include/linux/intel-service-client.h | 188 +++++++
5 files changed, 1368 insertions(+)
create mode 100644 drivers/misc/intel-service.c
create mode 100644 drivers/misc/intel-smc.h
create mode 100644 include/linux/intel-service-client.h
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 03605f8..ec225fa7 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -139,6 +139,18 @@ config INTEL_MID_PTI
an Intel Atom (non-netbook) mobile device containing a MIPI
P1149.7 standard implementation.
+config INTEL_SERVICE
+ tristate "Intel Service Layer"
+ depends on HAVE_ARM_SMCCC
+ default n
+ help
+ Intel service layer runs at privileged exception level, interfaces with
+ the service providers (FPGA manager is one of them) and manages secure
+ monitor call to communicate with secure monitor software at secure monitor
+ exception level.
+
+ Say Y here if you want Intel service layer support.
+
config SGI_IOC4
tristate "SGI IOC4 Base IO support"
depends on PCI
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index c3c8624..3857fc2 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_AD525X_DPOT) += ad525x_dpot.o
obj-$(CONFIG_AD525X_DPOT_I2C) += ad525x_dpot-i2c.o
obj-$(CONFIG_AD525X_DPOT_SPI) += ad525x_dpot-spi.o
obj-$(CONFIG_INTEL_MID_PTI) += pti.o
+obj-$(CONFIG_INTEL_SERVICE) += intel-service.o
obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
obj-$(CONFIG_DUMMY_IRQ) += dummy-irq.o
diff --git a/drivers/misc/intel-service.c b/drivers/misc/intel-service.c
new file mode 100644
index 0000000..8cf6f9b
--- /dev/null
+++ b/drivers/misc/intel-service.c
@@ -0,0 +1,962 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2018, Intel Corporation
+ */
+
+/*
+ * Intel Stratix10 SoC is composed of a 64 bit quad-core ARM Cortex A53 hard
+ * processor system (HPS) and Secure Device Manager (SDM). SDM is the
+ * hardware which does the FPGA configuration, QSPI, Crypto and warm reset.
+ *
+ * When the FPGA is configured from HPS, there needs to be a way for HPS to
+ * notify SDM the location and size of the configuration data. Then SDM will
+ * get the configuration data from that location and perform the FPGA
+ * configuration.
+ *
+ * To meet the whole system security needs and support virtual machine
+ * requesting communication with SDM, only the secure world of software (EL3,
+ * Exception Level 3) can interface with SDM. All software entities running
+ * on other exception levels must channel through the EL3 software whenever
+ * it needs service from SDM.
+ *
+ * Intel Stratix10 service layer driver is added to provide the service for
+ * FPGA configuration. Running at privileged exception level (EL1, Exception
+ * Level 1), Intel Stratix10 service layer driver interfaces with the service
+ * client at EL1 (Intel Stratix10 FPGA Manager) and manages secure monitor
+ * call (SMC) to communicate with secure monitor software at secure monitor
+ * exception level (EL3).
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/genalloc.h>
+#include <linux/intel-service-client.h>
+#include <linux/io.h>
+#include <linux/kfifo.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include "intel-smc.h"
+
+/* SVC_NUM_DATA_IN_FIFO - number of struct intel_svc_data in the FIFO */
+#define SVC_NUM_DATA_IN_FIFO 32
+/* SVC_NUM_CHANNEL - number of channel supported by service layer driver */
+#define SVC_NUM_CHANNEL 2
+/*
+ * FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS - claim back the submitted buffer(s)
+ * from the secure world for FPGA manager to reuse, or to free the buffer(s)
+ * when all bit-stream data had be send.
+ */
+#define FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS 200
+/*
+ * FPGA_CONFIG_STATUS_TIMEOUT_SEC - poll the FPGA configuration status,
+ * service layer will return error to FPGA manager when timeout occurs,
+ * timeout is set to 30 seconds (30 * 1000) at Intel Stratix10 SoC.
+ */
+#define FPGA_CONFIG_STATUS_TIMEOUT_SEC 30
+
+typedef void (svc_invoke_fn)(unsigned long, unsigned long, unsigned long,
+ unsigned long, unsigned long, unsigned long,
+ unsigned long, unsigned long,
+ struct arm_smccc_res *);
+
+struct intel_svc_chan;
+
+/**
+ * struct intel_svc_sh_memory - service shared memory structure
+ * @sync_complete: state for a completion
+ * @addr: physical address of shared memory block
+ * @size: size of shared memory block
+ * @invoke_fn: function to issue secure monitor or hypervisor call
+ *
+ * This struct is used to save physical address and size of shared memory
+ * block. The shared memory blocked is allocated by secure monitor software
+ * at secure world.
+ *
+ * Service layer driver uses the physical address and size to create a memory
+ * pool, then allocates data buffer from that memory pool for service client.
+ */
+struct intel_svc_sh_memory {
+ struct completion sync_complete;
+ unsigned long addr;
+ unsigned long size;
+ svc_invoke_fn *invoke_fn;
+};
+
+/**
+ * struct intel_svc_data_mem - service memory structure
+ * @vaddr: virtual address
+ * @paddr: physical address
+ * @size: size of memory
+ * @node: link list head node
+ *
+ * This struct is used in a list that keeps track of buffers which have
+ * been allocated or freed from the memory pool. Service layer driver also
+ * uses this struct to transfer physical address to virtual address.
+ */
+struct intel_svc_data_mem {
+ void *vaddr;
+ phys_addr_t paddr;
+ size_t size;
+ struct list_head node;
+};
+
+/**
+ * struct intel_svc_data - service data structure
+ * @chan: service channel
+ * @paddr: playload physical address
+ * @size: playload size
+ * @command: service command requested by client
+ *
+ * This struct is used in service FIFO for inter-process communication.
+ */
+struct intel_svc_data {
+ struct intel_svc_chan *chan;
+ phys_addr_t paddr;
+ size_t size;
+ u32 command;
+};
+
+/**
+ * struct intel_svc_controller - service controller
+ * @dev: device
+ * @chans: array of service channels
+ * $num_chans: number of channels in 'chans' array
+ * @node: list management
+ * @genpool: memory pool pointing to the memory region
+ * @task: pointer to the thread task which handles SMC or HVC call
+ * @svc_fifo: a queue for storing service message data
+ * @complete_status: state for completion
+ * @svc_fifo_lock: protect access to service message data queue
+ * @invoke_fn: function to issue secure monitor call or hypervisor call
+ *
+ * This struct is used to create communication channels for service clients, to
+ * handle secure monitor or hypervisor call.
+ */
+struct intel_svc_controller {
+ struct device *dev;
+ struct intel_svc_chan *chans;
+ int num_chans;
+ struct list_head node;
+ struct gen_pool *genpool;
+ struct task_struct *task;
+ struct kfifo svc_fifo;
+ struct completion complete_status;
+ spinlock_t svc_fifo_lock;
+ svc_invoke_fn *invoke_fn;
+};
+
+/**
+ * struct intel_svc_chan - service communication channel
+ * @ctrl: pointer to service controller which is the provider of this channel
+ * @scl: pointer to service client which owns the channel
+ * @name: service client name associated with the channel
+ * @lock: protect access to the channel
+ *
+ * This struct is used by service client to communicate with service layer, each
+ * service client has its own channel created by service controller.
+ */
+struct intel_svc_chan {
+ struct intel_svc_controller *ctrl;
+ struct intel_svc_client *scl;
+ char *name;
+ spinlock_t lock;
+};
+
+static LIST_HEAD(svc_ctrl);
+static LIST_HEAD(svc_data_mem);
+
+/**
+ * intel_svc_request_channel_byname() - request a service channel
+ * @client: pointer to service client
+ * @name: service client name
+ *
+ * This function is used by service client to request a service channel.
+ *
+ * Return: a pointer to channel assigned to the client on success,
+ * or ERR_PTR() on error.
+ */
+struct intel_svc_chan *intel_svc_request_channel_byname(
+ struct intel_svc_client *client, const char *name)
+{
+ struct device *dev = client->dev;
+ struct intel_svc_controller *controller;
+ struct intel_svc_chan *chan;
+ unsigned long flag;
+ int i;
+
+ chan = ERR_PTR(-EPROBE_DEFER);
+ if (list_empty(&svc_ctrl))
+ return ERR_PTR(-ENODEV);
+
+ controller = list_first_entry(&svc_ctrl,
+ struct intel_svc_controller, node);
+ for (i = 0; i < SVC_NUM_CHANNEL; i++) {
+ if (!strcmp(controller->chans[i].name, name)) {
+ chan = &controller->chans[i];
+ break;
+ }
+ }
+
+ if (chan->scl || !try_module_get(controller->dev->driver->owner)) {
+ dev_dbg(dev, "%s: svc not free\n", __func__);
+ return ERR_PTR(-EBUSY);
+ }
+
+ spin_lock_irqsave(&chan->lock, flag);
+ chan->scl = client;
+ spin_unlock_irqrestore(&chan->lock, flag);
+
+ return chan;
+}
+EXPORT_SYMBOL_GPL(intel_svc_request_channel_byname);
+
+/**
+ * intel_svc_free_channel() - free service channel
+ * @chan: service channel to be freed
+ *
+ * This function is used by service client to free a service channel.
+ */
+void intel_svc_free_channel(struct intel_svc_chan *chan)
+{
+ unsigned long flag;
+
+ spin_lock_irqsave(&chan->lock, flag);
+ chan->scl = NULL;
+ module_put(chan->ctrl->dev->driver->owner);
+ spin_unlock_irqrestore(&chan->lock, flag);
+}
+EXPORT_SYMBOL_GPL(intel_svc_free_channel);
+
+/**
+ * intel_svc_send() - send a message data to the remote
+ * @chan: service channel assigned to the client
+ * @msg: message data to be sent, in the format of "struct intel_svc_client_msg"
+ *
+ * This function is used by service client to add a message to the service
+ * layer driver's queue for being sent to the secure world.
+ *
+ * Return: 0 for success, -ENOMEM or -ENOBUFS on error.
+ */
+int intel_svc_send(struct intel_svc_chan *chan, void *msg)
+{
+ struct intel_svc_client_msg *p_msg = (struct intel_svc_client_msg *)msg;
+ struct intel_svc_data_mem *p_mem;
+ struct intel_svc_data *p_data;
+ int ret = 0;
+
+ p_data = kmalloc(sizeof(*p_data), GFP_KERNEL);
+ if (!p_data)
+ return -ENOMEM;
+
+ pr_debug("%s: sent P-va=%p, P-com=%x, P-size=%u\n", __func__,
+ p_msg->payload, p_msg->command,
+ (unsigned int)p_msg->payload_length);
+
+ list_for_each_entry(p_mem, &svc_data_mem, node) {
+ if (p_mem->vaddr == p_msg->payload) {
+ p_data->paddr = p_mem->paddr;
+ break;
+ }
+ }
+
+ p_data->command = p_msg->command;
+ p_data->size = p_msg->payload_length;
+ p_data->chan = chan;
+ pr_debug("%s: put to FIFO pa=0x%016x, cmd=%x, size=%u\n", __func__,
+ (unsigned int)p_data->paddr, p_data->command,
+ (unsigned int)p_data->size);
+ ret = kfifo_in_spinlocked(&chan->ctrl->svc_fifo, p_data,
+ sizeof(*p_data),
+ &chan->ctrl->svc_fifo_lock);
+
+ kfree(p_data);
+
+ if (!ret)
+ return -ENOBUFS;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(intel_svc_send);
+
+/**
+ * intel_svc_allocate_memory() - allocate memory
+ * @chan: service channel assigned to the client
+ * @size: memory size requested by a specific service client
+ *
+ * Service layer allocates the requested number of bytes buffer from the
+ * memory pool, service client uses this function to get allocated buffers.
+ *
+ * Return: address of allocated memory on success, or ERR_PTR() on error.
+ */
+void *intel_svc_allocate_memory(struct intel_svc_chan *chan, size_t size)
+{
+ struct intel_svc_data_mem *pmem;
+ unsigned long va;
+ phys_addr_t pa;
+ struct gen_pool *genpool = chan->ctrl->genpool;
+ size_t s = roundup(size, 1 << genpool->min_alloc_order);
+
+ pmem = devm_kzalloc(chan->ctrl->dev, sizeof(*pmem), GFP_KERNEL);
+ if (!pmem)
+ return ERR_PTR(-ENOMEM);
+
+ va = gen_pool_alloc(genpool, s);
+ if (!va)
+ return ERR_PTR(-ENOMEM);
+
+ memset((void *)va, 0, s);
+ pa = gen_pool_virt_to_phys(genpool, va);
+
+ pmem->vaddr = (void *)va;
+ pmem->paddr = pa;
+ pmem->size = s;
+ list_add_tail(&pmem->node, &svc_data_mem);
+ pr_debug("%s: va=%p, pa=0x%016x\n", __func__,
+ pmem->vaddr, (unsigned int)pmem->paddr);
+
+ return (void *)va;
+}
+EXPORT_SYMBOL_GPL(intel_svc_allocate_memory);
+
+/**
+ * intel_svc_free_memory() - free allocated memory
+ * @chan: service channel assigned to the client
+ * @kaddr: memory to be freed
+ *
+ * This function is used by service client to free allocated buffers.
+ */
+void intel_svc_free_memory(struct intel_svc_chan *chan, void *kaddr)
+{
+ struct intel_svc_data_mem *pmem;
+ size_t size = 0;
+
+ list_for_each_entry(pmem, &svc_data_mem, node)
+ if (pmem->vaddr == kaddr) {
+ size = pmem->size;
+ break;
+ }
+
+ gen_pool_free(chan->ctrl->genpool, (unsigned long)kaddr, size);
+ pmem->vaddr = NULL;
+ list_del(&pmem->node);
+}
+EXPORT_SYMBOL_GPL(intel_svc_free_memory);
+
+/**
+ * svc_pa_to_va() - translate physical address to virtual address
+ * @addr: to be translated physical address
+ *
+ * Return: valid virtual address or NULL if the provided physical
+ * address doesn't exist.
+ */
+static void *svc_pa_to_va(unsigned long addr)
+{
+ struct intel_svc_data_mem *pmem;
+
+ pr_debug("claim back P-addr=0x%016x\n", (unsigned int)addr);
+ list_for_each_entry(pmem, &svc_data_mem, node) {
+ if (pmem->paddr == addr)
+ return pmem->vaddr;
+ }
+
+ /* physical address is not found */
+ return NULL;
+}
+
+/**
+ * svc_thread_cmd_data_claim() - claim back buffer from the secure world
+ * @addr: pointer to service layer controller
+ * @p_data: pointer to service data structure
+ * @cb_data: pointer to callback data structure to service client
+ *
+ * Claim back the submitted buffers from the secure world and pass buffer
+ * back to service client (FPGA manager, etc) for reuse.
+ */
+static void svc_thread_cmd_data_claim(struct intel_svc_controller *ctrl,
+ struct intel_svc_data *p_data,
+ struct intel_svc_cb_data *cb_data)
+{
+ struct arm_smccc_res res;
+ unsigned long timeout;
+
+ reinit_completion(&ctrl->complete_status);
+ timeout = msecs_to_jiffies(FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS);
+
+ pr_debug("%s: claim back the submitted buffer\n", __func__);
+ do {
+ ctrl->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE,
+ 0, 0, 0, 0, 0, 0, 0, &res);
+
+ if (res.a0 == INTEL_SIP_SMC_STATUS_OK) {
+ if (!res.a1) {
+ complete(&ctrl->complete_status);
+ break;
+ }
+ cb_data->status = BIT(SVC_STATUS_RECONFIG_BUFFER_DONE);
+ cb_data->kaddr1 = svc_pa_to_va(res.a1);
+ cb_data->kaddr2 = (res.a2) ?
+ svc_pa_to_va(res.a2) : NULL;
+ cb_data->kaddr3 = (res.a3) ?
+ svc_pa_to_va(res.a3) : NULL;
+ p_data->chan->scl->receive_cb(p_data->chan->scl,
+ cb_data);
+ } else {
+ pr_debug("%s: secure world busy, polling again\n",
+ __func__);
+ }
+ } while (res.a0 == INTEL_SIP_SMC_STATUS_OK ||
+ res.a0 == INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY ||
+ wait_for_completion_timeout(&ctrl->complete_status, timeout));
+}
+
+/**
+ * svc_thread_cmd_config_status() - check configuration status
+ * @ctrl: pointer to service layer controller
+ * @p_data: pointer to service data structure
+ * @cb_data: pointer to callback data structure to service client
+ *
+ * Check whether the secure firmware at secure world has finished the FPGA
+ * configuration, and then inform FPGA manager the configuration status.
+ */
+static void svc_thread_cmd_config_status(struct intel_svc_controller *ctrl,
+ struct intel_svc_data *p_data,
+ struct intel_svc_cb_data *cb_data)
+{
+ struct arm_smccc_res res;
+ int count_in_sec;
+
+ cb_data->kaddr1 = NULL;
+ cb_data->kaddr2 = NULL;
+ cb_data->kaddr3 = NULL;
+ cb_data->status = BIT(SVC_STATUS_RECONFIG_ERROR);
+
+ pr_debug("%s: polling config status\n", __func__);
+
+ count_in_sec = FPGA_CONFIG_STATUS_TIMEOUT_SEC;
+ while (count_in_sec) {
+ ctrl->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_ISDONE,
+ 0, 0, 0, 0, 0, 0, 0, &res);
+ if ((res.a0 == INTEL_SIP_SMC_STATUS_OK) ||
+ (res.a0 == INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR))
+ break;
+
+ /*
+ * configuration is still in progress, wait one second then
+ * poll again
+ */
+ msleep(1000);
+ count_in_sec--;
+ };
+
+ if (res.a0 == INTEL_SIP_SMC_STATUS_OK && count_in_sec)
+ cb_data->status = BIT(SVC_STATUS_RECONFIG_COMPLETED);
+
+ p_data->chan->scl->receive_cb(p_data->chan->scl, cb_data);
+}
+
+/**
+ * svc_thread_recv_status_ok() - handle the successful status
+ * @p_data: pointer to service data structure
+ * @cb_data: pointer to callback data structure to service client
+ * @res: result from SMC or HVC call
+ *
+ * Send back the correspond status to the service client (FPGA manager etc).
+ */
+static void svc_thread_recv_status_ok(struct intel_svc_data *p_data,
+ struct intel_svc_cb_data *cb_data,
+ struct arm_smccc_res res)
+{
+ cb_data->kaddr1 = NULL;
+ cb_data->kaddr2 = NULL;
+ cb_data->kaddr3 = NULL;
+
+ switch (p_data->command) {
+ case COMMAND_RECONFIG:
+ cb_data->status = BIT(SVC_STATUS_RECONFIG_REQUEST_OK);
+ break;
+ case COMMAND_RECONFIG_DATA_SUBMIT:
+ cb_data->status = BIT(SVC_STATUS_RECONFIG_BUFFER_SUBMITTED);
+ break;
+ case COMMAND_NOOP:
+ cb_data->status = BIT(SVC_STATUS_RECONFIG_BUFFER_SUBMITTED);
+ cb_data->kaddr1 = svc_pa_to_va(res.a1);
+ break;
+ case COMMAND_RECONFIG_STATUS:
+ cb_data->status = BIT(SVC_STATUS_RECONFIG_COMPLETED);
+ break;
+ default:
+ break;
+ }
+
+ pr_debug("%s: call receive_cb\n", __func__);
+ p_data->chan->scl->receive_cb(p_data->chan->scl, cb_data);
+}
+
+/**
+ * svc_normal_to_secure_thread() - the function to run in the kthread
+ * @data: data pointer for kthread function
+ *
+ * Service layer driver creates intel_svc_smc_hvc_call kthread on CPU
+ * node 0, its function intel_svc_secure_call_thread is used to handle
+ * SMC or HVC calls between kernel driver and secure monitor software.
+ *
+ * Return: 0 for success or -ENOMEM on error.
+ */
+static int svc_normal_to_secure_thread(void *data)
+{
+ struct intel_svc_controller *ctrl = (struct intel_svc_controller *)data;
+ struct intel_svc_data *pdata;
+ struct intel_svc_cb_data *cbdata;
+ struct arm_smccc_res res;
+ unsigned long a0, a1, a2;
+ int ret_fifo = 0;
+
+ pdata = kmalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ cbdata = kmalloc(sizeof(*cbdata), GFP_KERNEL);
+ if (!cbdata)
+ return -ENOMEM;
+
+ /* default set, to remove build warning */
+ a0 = INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK;
+ a1 = 0;
+ a2 = 0;
+
+ while (!kthread_should_stop()) {
+ ret_fifo = kfifo_out_spinlocked(&ctrl->svc_fifo,
+ pdata, sizeof(*pdata),
+ &ctrl->svc_fifo_lock);
+
+ if (!ret_fifo)
+ continue;
+
+ pr_debug("get from FIFO pa=0x%016x, command=%u, size=%u\n",
+ (unsigned int)pdata->paddr, pdata->command,
+ (unsigned int)pdata->size);
+
+ switch (pdata->command) {
+ case COMMAND_RECONFIG_DATA_CLAIM:
+ svc_thread_cmd_data_claim(ctrl, pdata, cbdata);
+ continue;
+ case COMMAND_RECONFIG:
+ a0 = INTEL_SIP_SMC_FPGA_CONFIG_START;
+ a1 = 0;
+ a2 = 0;
+ break;
+ case COMMAND_RECONFIG_DATA_SUBMIT:
+ a0 = INTEL_SIP_SMC_FPGA_CONFIG_WRITE;
+ a1 = (unsigned long)pdata->paddr;
+ a2 = (unsigned long)pdata->size;
+ break;
+ case COMMAND_RECONFIG_STATUS:
+ a0 = INTEL_SIP_SMC_FPGA_CONFIG_ISDONE;
+ a1 = 0;
+ a2 = 0;
+ break;
+ default:
+ /* it shouldn't happen */
+ break;
+ }
+ pr_debug("%s: before SMC call -- a0=0x%016x a1=0x%016x",
+ __func__, (unsigned int)a0, (unsigned int)a1);
+ pr_debug(" a2=0x%016x\n", (unsigned int)a2);
+
+ ctrl->invoke_fn(a0, a1, a2, 0, 0, 0, 0, 0, &res);
+
+ pr_debug("%s: after SMC call -- res.a0=0x%016x",
+ __func__, (unsigned int)res.a0);
+ pr_debug(" res.a1=0x%016x, res.a2=0x%016x",
+ (unsigned int)res.a1, (unsigned int)res.a2);
+ pr_debug(" res.a3=0x%016x\n", (unsigned int)res.a3);
+
+ switch (res.a0) {
+ case INTEL_SIP_SMC_STATUS_OK:
+ svc_thread_recv_status_ok(pdata, cbdata, res);
+ break;
+ case INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY:
+ switch (pdata->command) {
+ case COMMAND_RECONFIG_DATA_SUBMIT:
+ svc_thread_cmd_data_claim(ctrl,
+ pdata, cbdata);
+ break;
+ case COMMAND_RECONFIG_STATUS:
+ svc_thread_cmd_config_status(ctrl,
+ pdata, cbdata);
+ break;
+ default:
+ break;
+ }
+ break;
+ case INTEL_SIP_SMC_FPGA_CONFIG_STATUS_REJECTED:
+ pr_debug("%s: STATUS_REJECTED\n", __func__);
+ break;
+ case INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR:
+ pr_err("%s: STATUS_ERROR\n", __func__);
+ cbdata->status = BIT(SVC_STATUS_RECONFIG_ERROR);
+ cbdata->kaddr1 = NULL;
+ cbdata->kaddr2 = NULL;
+ cbdata->kaddr3 = NULL;
+ pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata);
+ break;
+ default:
+ break;
+ }
+ };
+
+ kfree(cbdata);
+ kfree(pdata);
+
+ return 0;
+}
+
+/**
+ * svc_normal_to_secure_shm_thread() - the function to run in the kthread
+ * @data: data pointer for kthread function
+ *
+ * Service layer driver creates intel_svc_smc_hvc_shm kthread on CPU
+ * node 0, its function intel_svc_secure_shm_thread is used to query the
+ * physical address of memory block reserved by secure monitor software at
+ * secure world.
+ *
+ * svc_normal_to_secure_shm_thread() calls do_exit() directly since it is a
+ * standlone thread for which no one will call kthread_stop() or return when
+ * 'kthread_should_stop()' is true.
+ */
+static int svc_normal_to_secure_shm_thread(void *data)
+{
+ struct intel_svc_sh_memory *sh_mem = (struct intel_svc_sh_memory *)data;
+ struct arm_smccc_res res;
+
+ /* SMC or HVC call to get shared memory info from secure world */
+ sh_mem->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM,
+ 0, 0, 0, 0, 0, 0, 0, &res);
+ if (res.a0 == INTEL_SIP_SMC_STATUS_OK) {
+ sh_mem->addr = res.a1;
+ sh_mem->size = res.a2;
+ } else {
+ pr_err("%s: after SMC call -- res.a0=0x%016x", __func__,
+ (unsigned int)res.a0);
+ sh_mem->addr = 0;
+ sh_mem->size = 0;
+ }
+
+ complete(&sh_mem->sync_complete);
+ do_exit(0);
+}
+
+/**
+ * svc_get_sh_memory() - get memory block reserved by secure monitor SW
+ * @pdev: pointer to service layer device
+ * @sh_memory pointer to service shared memory structure
+ *
+ * Return: zero for successfully getting the physical address of memory block
+ * reserved by secure monitor software, or negative value on error.
+ */
+static int svc_get_sh_memory(struct platform_device *pdev,
+ struct intel_svc_sh_memory *sh_memory)
+{
+ struct device *dev = &pdev->dev;
+ struct task_struct *sh_memory_task;
+
+ init_completion(&sh_memory->sync_complete);
+
+ /* smc/hvc call happens on cpu 0 bound kthread */
+ sh_memory_task = kthread_create_on_cpu(svc_normal_to_secure_shm_thread,
+ (void *)sh_memory,
+ 0, "svc_smc_hvc_shm_thread");
+ if (IS_ERR(sh_memory_task)) {
+ dev_err(dev, "fail to create intel_svc_smc_shm_thread\n");
+ return -EINVAL;
+ }
+
+ wake_up_process(sh_memory_task);
+
+ if (!wait_for_completion_timeout(&sh_memory->sync_complete, 10 * HZ)) {
+ dev_err(dev,
+ "timeout to get sh-memory paras from secure world\n");
+ return -ETIMEDOUT;
+ }
+
+ if (!sh_memory->addr || !sh_memory->size) {
+ dev_err(dev,
+ "fails to get shared memory info from secure world\n");
+ return -ENOMEM;
+ }
+
+ dev_dbg(dev, "SM software provides paddr: 0x%016x, size: 0x%08x\n",
+ (unsigned int)sh_memory->addr,
+ (unsigned int)sh_memory->size);
+
+ return 0;
+}
+
+/**
+ * svc_create_memory_pool() - create a memory pool from reserved memory block
+ * @pdev: pointer to service layer device
+ * @sh_memory: pointer to service shared memory structure
+ *
+ * Return: pool allocated from reserved memory block or ERR_PTR() on error.
+ */
+static struct gen_pool *
+svc_create_memory_pool(struct platform_device *pdev,
+ struct intel_svc_sh_memory *sh_memory)
+{
+ struct device *dev = &pdev->dev;
+ struct gen_pool *genpool;
+ unsigned long vaddr;
+ phys_addr_t paddr;
+ size_t size;
+ phys_addr_t begin;
+ phys_addr_t end;
+ void *va;
+ size_t page_mask = PAGE_SIZE - 1;
+ int min_alloc_order = 3;
+ int ret;
+
+ begin = roundup(sh_memory->addr, PAGE_SIZE);
+ end = rounddown(sh_memory->addr + sh_memory->size, PAGE_SIZE);
+ paddr = begin;
+ size = end - begin;
+ va = memremap(paddr, size, MEMREMAP_WC);
+ if (!va) {
+ dev_err(dev, "fail to remap shared memory\n");
+ return ERR_PTR(-EINVAL);
+ }
+ vaddr = (unsigned long)va;
+ dev_dbg(dev,
+ "reserved memory vaddr: %p, paddr: 0x%16x size: 0x%8x\n",
+ va, (unsigned int)paddr, (unsigned int)size);
+ if ((vaddr & page_mask) || (paddr & page_mask) ||
+ (size & page_mask)) {
+ dev_err(dev, "page is not aligned\n");
+ return ERR_PTR(-EINVAL);
+ }
+ genpool = gen_pool_create(min_alloc_order, -1);
+ if (!genpool) {
+ dev_err(dev, "fail to create genpool\n");
+ return ERR_PTR(-ENOMEM);
+ }
+ gen_pool_set_algo(genpool, gen_pool_best_fit, NULL);
+ ret = gen_pool_add_virt(genpool, vaddr, paddr, size, -1);
+ if (ret) {
+ dev_err(dev, "fail to add memory chunk to the pool\n");
+ gen_pool_destroy(genpool);
+ return ERR_PTR(ret);
+ }
+
+ return genpool;
+}
+
+/**
+ * svc_smccc_smc() - secure monitor call between normal and secure world
+ * @a0-a7: arguments passed in registers 0 to 7
+ * @res: result values from register 0 to 3
+ */
+static void svc_smccc_smc(unsigned long a0, unsigned long a1,
+ unsigned long a2, unsigned long a3,
+ unsigned long a4, unsigned long a5,
+ unsigned long a6, unsigned long a7,
+ struct arm_smccc_res *res)
+{
+ arm_smccc_smc(a0, a1, a2, a3, a4, a5, a6, a7, res);
+}
+
+/**
+ * svc_smccc_hvc() - hypervisor call between normal and secure world
+ * @a0-a7: arguments passed in registers 0 to 7
+ * @res: result values from register 0 to 3
+ */
+static void svc_smccc_hvc(unsigned long a0, unsigned long a1,
+ unsigned long a2, unsigned long a3,
+ unsigned long a4, unsigned long a5,
+ unsigned long a6, unsigned long a7,
+ struct arm_smccc_res *res)
+{
+ arm_smccc_hvc(a0, a1, a2, a3, a4, a5, a6, a7, res);
+}
+
+/**
+ * get_invoke_func() - invoke SMC or HVC call
+ * @dev: pointer to device
+ *
+ * Return: function pointer to svc_smccc_smc or svc_smccc_hvc.
+ */
+static svc_invoke_fn *get_invoke_func(struct device *dev)
+{
+ const char *method;
+
+ if (of_property_read_string(dev->of_node, "method", &method)) {
+ dev_warn(dev, "missing \"method\" property\n");
+ return ERR_PTR(-ENXIO);
+ }
+
+ if (!strcmp(method, "smc"))
+ return svc_smccc_smc;
+ if (!strcmp(method, "hvc"))
+ return svc_smccc_hvc;
+
+ dev_warn(dev, "invalid \"method\" property: %s\n", method);
+
+ return ERR_PTR(-EINVAL);
+}
+
+static const struct of_device_id intel_svc_drv_match[] = {
+ {.compatible = "intel,stratix10-svc"},
+ {},
+};
+
+static int intel_svc_drv_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct intel_svc_controller *controller;
+ struct intel_svc_chan *chans;
+ struct gen_pool *genpool;
+ struct intel_svc_sh_memory *sh_memory;
+ struct task_struct *task;
+ svc_invoke_fn *invoke_fn;
+ size_t fifo_size;
+ int ret;
+
+ /* get SMC or HVC function */
+ invoke_fn = get_invoke_func(dev);
+ if (IS_ERR(invoke_fn))
+ return -EINVAL;
+
+ sh_memory = devm_kzalloc(dev, sizeof(*sh_memory), GFP_KERNEL);
+ if (!sh_memory)
+ return -ENOMEM;
+
+ sh_memory->invoke_fn = invoke_fn;
+ ret = svc_get_sh_memory(pdev, sh_memory);
+ if (ret)
+ return ret;
+
+ genpool = svc_create_memory_pool(pdev, sh_memory);
+ if (!genpool)
+ return -ENOMEM;
+
+ /* allocate service controller and supporting channel */
+ controller = devm_kzalloc(dev, sizeof(*controller), GFP_KERNEL);
+ if (!controller)
+ return -ENOMEM;
+
+ chans = devm_kmalloc_array(dev, SVC_NUM_CHANNEL,
+ sizeof(*chans), GFP_KERNEL | __GFP_ZERO);
+ if (!chans)
+ return -ENOMEM;
+
+ /* smc or hvc call happens on cpu 0 bound kthread */
+ task = kthread_create_on_cpu(svc_normal_to_secure_thread,
+ (void *)controller, 0,
+ "svc_smc_hvc_thread");
+ if (IS_ERR(task)) {
+ dev_err(dev, "fails to create svc_smc_hvc_thread\n");
+ return -EINVAL;
+ }
+
+ controller->dev = dev;
+ controller->num_chans = SVC_NUM_CHANNEL;
+ controller->chans = chans;
+ controller->genpool = genpool;
+ controller->task = task;
+ controller->invoke_fn = invoke_fn;
+ init_completion(&controller->complete_status);
+
+ fifo_size = sizeof(struct intel_svc_data) * SVC_NUM_DATA_IN_FIFO;
+ ret = kfifo_alloc(&controller->svc_fifo, fifo_size, GFP_KERNEL);
+ if (ret) {
+ dev_err(dev, "fails to allocate FIFO\n");
+ return ret;
+ }
+ spin_lock_init(&controller->svc_fifo_lock);
+
+ chans[0].scl = NULL;
+ chans[0].ctrl = controller;
+ chans[0].name = SVC_CLIENT_FPGA;
+ spin_lock_init(&chans[0].lock);
+
+ chans[1].scl = NULL;
+ chans[1].ctrl = controller;
+ chans[1].name = SVC_CLIENT_DUMMY;
+ spin_lock_init(&chans[1].lock);
+
+ wake_up_process(controller->task);
+
+ list_add_tail(&controller->node, &svc_ctrl);
+ platform_set_drvdata(pdev, controller);
+
+ pr_info("Intel Service Layer Driver Initialized\n");
+
+ return ret;
+}
+
+static int intel_svc_drv_remove(struct platform_device *pdev)
+{
+ struct intel_svc_controller *ctrl = platform_get_drvdata(pdev);
+
+ kfifo_free(&ctrl->svc_fifo);
+ kthread_stop(ctrl->task);
+ if (ctrl->genpool)
+ gen_pool_destroy(ctrl->genpool);
+ list_del(&ctrl->node);
+
+ return 0;
+}
+
+static struct platform_driver intel_svc_driver = {
+ .probe = intel_svc_drv_probe,
+ .remove = intel_svc_drv_remove,
+ .driver = {
+ .name = "intel-svc",
+ .of_match_table = intel_svc_drv_match,
+ },
+};
+
+static int __init intel_svc_init(void)
+{
+ struct device_node *fw_np;
+ struct device_node *np;
+ int ret;
+
+ fw_np = of_find_node_by_name(NULL, "firmware");
+ if (!fw_np)
+ return -ENODEV;
+
+ np = of_find_matching_node(fw_np, intel_svc_drv_match);
+ if (!np) {
+ of_node_put(fw_np);
+ return -ENODEV;
+ }
+
+ of_node_put(np);
+ ret = of_platform_populate(fw_np, intel_svc_drv_match, NULL, NULL);
+ of_node_put(fw_np);
+ if (ret)
+ return ret;
+
+ return platform_driver_register(&intel_svc_driver);
+}
+
+static void __exit intel_svc_exit(void)
+{
+ return platform_driver_unregister(&intel_svc_driver);
+}
+
+subsys_initcall(intel_svc_init);
+module_exit(intel_svc_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel Stratix10 Service Layer Driver");
+MODULE_AUTHOR("Richard Gong <richard.gong at intel.com>");
+MODULE_ALIAS("platform:intel-svc");
diff --git a/drivers/misc/intel-smc.h b/drivers/misc/intel-smc.h
new file mode 100644
index 0000000..0b92560
--- /dev/null
+++ b/drivers/misc/intel-smc.h
@@ -0,0 +1,205 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017-2018, Intel Corporation
+ */
+
+#ifndef __INTEL_SMC_H
+#define __INTEL_SMC_H
+
+#include <linux/arm-smccc.h>
+#include <linux/bitops.h>
+
+/*
+ * This file defines the Secure Monitor Call (SMC) message protocol used for
+ * service layer driver in normal world (EL1) to communicate with secure
+ * monitor software in Secure Monitor Exception Level 3 (EL3).
+ *
+ * This file is shared with secure firmware (FW) which is out of kernel tree.
+ *
+ * An ARM SMC instruction takes a function identifier and up to 6 64-bit
+ * register values as arguments, and can return up to 4 64-bit register
+ * value. The operation of the secure monitor is determined by the parameter
+ * values passed in through registers.
+
+ * EL1 and EL3 communicates pointer as physical address rather than the
+ * virtual address.
+ */
+
+/*
+ * Functions specified by ARM SMC Calling convention:
+ *
+ * FAST call executes atomic operations, returns when the requested operation
+ * has completed.
+ * STD call starts a operation which can be preempted by a non-secure
+ * interrupt. The call can return before the requested operation has
+ * completed.
+ *
+ * a0..a7 is used as register names in the descriptions below, on arm32
+ * that translates to r0..r7 and on arm64 to w0..w7.
+ */
+
+#define INTEL_SIP_SMC_STD_CALL_VAL(func_num) \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_64, \
+ ARM_SMCCC_OWNER_SIP, (func_num))
+
+#define INTEL_SIP_SMC_FAST_CALL_VAL(func_num) \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \
+ ARM_SMCCC_OWNER_SIP, (func_num))
+
+/*
+ * Return values in INTEL_SIP_SMC_* call
+ *
+ * INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION:
+ * Secure monitor software doesn't recognize the request.
+ *
+ * INTEL_SIP_SMC_STATUS_OK:
+ * FPGA configuration completed successfully,
+ * In case of FPGA configuration write operation, it means secure monitor
+ * software can accept the next chunk of FPGA configuration data.
+ *
+ * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY:
+ * In case of FPGA configuration write operation, it means secure monitor
+ * software is still processing previous data & can't accept the next chunk
+ * of data. Service driver needs to issue
+ * INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE call to query the
+ * completed block(s).
+ *
+ * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR:
+ * There is error during the FPGA configuration process.
+ */
+#define INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION 0xFFFFFFFF
+#define INTEL_SIP_SMC_STATUS_OK 0x0
+#define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY 0x1
+#define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_REJECTED 0x2
+#define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR 0x4
+
+/*
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_START
+ *
+ * Sync call used by service driver at EL1 to request the FPGA in EL3 to
+ * be prepare to receive a new configuration.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_START.
+ * a1: flag for full or partial configuration
+ * 0 full reconfiguration.
+ * 1 partial reconfiguration.
+ * a2-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK, or INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
+ * a1-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START 1
+#define INTEL_SIP_SMC_FPGA_CONFIG_START \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START)
+
+/*
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_WRITE
+ *
+ * Async call used by service driver at EL1 to provide FPGA configuration data
+ * to secure world.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_WRITE.
+ * a1: 64bit physical address of the configuration data memory block
+ * a2: Size of configuration data block.
+ * a3-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY or
+ * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
+ * a1: 64bit physical address of 1st completed memory block if any completed
+ * block, otherwise zero value.
+ * a2: 64bit physical address of 2nd completed memory block if any completed
+ * block, otherwise zero value.
+ * a3: 64bit physical address of 3rd completed memory block if any completed
+ * block, otherwise zero value.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE 2
+#define INTEL_SIP_SMC_FPGA_CONFIG_WRITE \
+ INTEL_SIP_SMC_STD_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE)
+
+/*
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE
+ *
+ * Sync call used by service driver at EL1 to track the completed write
+ * transactions. This request is called after INTEL_SIP_SMC_FPGA_CONFIG_WRITE
+ * call returns INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE.
+ * a1-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY or
+ * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
+ * a1: 64bit physical address of 1st completed memory block.
+ * a2: 64bit physical address of 2nd completed memory block if
+ * any completed block, otherwise zero value.
+ * a3: 64bit physical address of 3rd completed memory block if
+ * any completed block, otherwise zero value.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE 3
+#define INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE \
+INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
+
+/*
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_ISDONE
+ *
+ * Sync call used by service driver at EL1 to inform secure world that all
+ * data are sent, to check whether or not the secure world had completed
+ * the FPGA configuration process.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_ISDONE.
+ * a1-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY or
+ * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
+ * a1-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE 4
+#define INTEL_SIP_SMC_FPGA_CONFIG_ISDONE \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE)
+
+/*
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM
+ *
+ * Sync call used by service driver at EL1 to query the physical address of
+ * memory block reserved by secure monitor software.
+ *
+ * Call register usage:
+ * a0:INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM.
+ * a1-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
+ * a1: start of physical address of reserved memory block.
+ * a2: size of reserved memory block.
+ * a3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM 5
+#define INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM)
+
+/*
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK
+ *
+ * For SMC loop-back mode only, used for internal integration, debugging
+ * or troubleshooting.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK.
+ * a1-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
+ * a1-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK 6
+#define INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK)
+
+#endif
diff --git a/include/linux/intel-service-client.h b/include/linux/intel-service-client.h
new file mode 100644
index 0000000..5a247b8
--- /dev/null
+++ b/include/linux/intel-service-client.h
@@ -0,0 +1,188 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017-2018, Intel Corporation
+ */
+
+#ifndef __INTEL_SERVICE_CLIENT_H
+#define __INTEL_SERVICE_CLIENT_H
+
+/*
+ * Service layer driver supports client names
+ *
+ * fpga: for FPGA configuration
+ * dummy: for integration/debug/trouble-shooting
+ */
+#define SVC_CLIENT_FPGA "fpga"
+#define SVC_CLIENT_DUMMY "dummy"
+
+/*
+ * Status of the sent command, in bit number
+ *
+ * SVC_COMMAND_STATUS_RECONFIG_REQUEST_OK:
+ * Secure firmware accepts the request of FPGA reconfiguration.
+ *
+ * SVC_STATUS_RECONFIG_BUFFER_SUBMITTED:
+ * Service client successfully submits FPGA configuration
+ * data buffer to secure firmware.
+ *
+ * SVC_COMMAND_STATUS_RECONFIG_BUFFER_DONE:
+ * Secure firmware completes data process, ready to accept the
+ * next WRITE transaction.
+ *
+ * SVC_COMMAND_STATUS_RECONFIG_COMPLETED:
+ * Secure firmware completes FPGA configuration successfully, FPGA should
+ * be in user mode.
+ *
+ * SVC_COMMAND_STATUS_RECONFIG_BUSY:
+ * FPGA configuration is still in process.
+ *
+ * SVC_COMMAND_STATUS_RECONFIG_ERROR:
+ * Error encountered during FPGA configuration.
+ */
+#define SVC_STATUS_RECONFIG_REQUEST_OK 0
+#define SVC_STATUS_RECONFIG_BUFFER_SUBMITTED 1
+#define SVC_STATUS_RECONFIG_BUFFER_DONE 2
+#define SVC_STATUS_RECONFIG_COMPLETED 3
+#define SVC_STATUS_RECONFIG_BUSY 4
+#define SVC_STATUS_RECONFIG_ERROR 5
+
+/*
+ * Flag bit for COMMAND_RECONFIG
+ *
+ * COMMAND_RECONFIG_FLAG_PARTIAL:
+ * Set to FPGA configuration type (full or partial), the default
+ * is full reconfig.
+ */
+#define COMMAND_RECONFIG_FLAG_PARTIAL 0
+
+/* Timeout settings for FPGA manager driver */
+#define SVC_RECONFIG_REQUEST_TIMEOUT_MS 100
+#define SVC_RECONFIG_BUFFER_TIMEOUT_MS 240
+
+struct intel_svc_chan;
+
+/**
+ * enum intel_svc_command_code - supporting service commands
+ *
+ * @COMMAND_NOOP: do 'dummy' request for integration/debug/trouble-shootings
+ *
+ * @COMMAND_RECONFIG: ask for FPGA configuration preparation, return status
+ * is SVC_STATUS_RECONFIG_REQUEST_OK
+ *
+ * @COMMAND_RECONFIG_DATA_SUBMIT: submit buffer(s) of bit-stream data for the
+ * FPGA configuration, return status is SVC_STATUS_RECONFIG_BUFFER_SUBMITTED,
+ * or SVC_STATUS_RECONFIG_ERROR
+ *
+ * @COMMAND_RECONFIG_DATA_CLAIM: check the status of the configuration, return
+ * status is SVC_STATUS_RECONFIG_COMPLETED, or SVC_STATUS_RECONFIG_BUSY, or
+ * SVC_STATUS_RECONFIG_ERROR
+
+ * @COMMAND_RECONFIG_STATUS: check the status of the configuration, return
+ * status is SVC_STATUS_RECONFIG_COMPLETED, or SVC_STATUS_RECONFIG_BUSY, or
+ * SVC_STATUS_RECONFIG_ERROR
+ */
+enum intel_svc_command_code {
+ COMMAND_NOOP = 0,
+ COMMAND_RECONFIG,
+ COMMAND_RECONFIG_DATA_SUBMIT,
+ COMMAND_RECONFIG_DATA_CLAIM,
+ COMMAND_RECONFIG_STATUS
+};
+
+/**
+ * struct intel_svc_client_msg - message sent by client to service
+ * @command: service command
+ * @payload: starting address of data need be processed
+ * @payload_length: data size in bytes
+ */
+struct intel_svc_client_msg {
+ void *payload;
+ size_t payload_length;
+ enum intel_svc_command_code command;
+};
+
+/**
+ * struct intel_svc_command_reconfig_payload - reconfig payload
+ * @flags: flag bit for the type of FPGA configuration
+ */
+struct intel_svc_command_reconfig_payload {
+ u32 flags;
+};
+
+/**
+ * struct intel_svc_cb_data - callback data structure from service layer
+ * @status: the status of sent command
+ * @kaddr1-3: used when status is SVC_COMMAND_STATUS_RECONFIG_BUFFER_DONE
+ *
+ * kaddr1 - address of 1st completed data block.
+ * kaddr2 - address of 2nd completed data block.
+ * kaddr3 - address of 3rd completed data block.
+ */
+struct intel_svc_cb_data {
+ u32 status;
+ void *kaddr1;
+ void *kaddr2;
+ void *kaddr3;
+};
+
+/**
+ * struct intel_svc_client - service client structure
+ * @dev: the client device
+ * @receive_callback: callback to provide service client the received data
+ * @priv: client private data
+ */
+struct intel_svc_client {
+ struct device *dev;
+ void (*receive_cb)(struct intel_svc_client *client,
+ struct intel_svc_cb_data *cb_data);
+ void *priv;
+};
+
+/**
+ * intel_svc_request_channel_byname() - request service channel
+ * @client: identity of the client requesting the channel
+ * @name: supporting client name defined above
+ *
+ * Return: a pointer to channel assigned to the client on success,
+ * or ERR_PTR() on error.
+ */
+struct intel_svc_chan
+*intel_svc_request_channel_byname(struct intel_svc_client *client,
+ const char *name);
+
+/**
+ * intel_svc_free_channel() - free service channel.
+ * @chan: service channel to be freed
+ */
+void intel_svc_free_channel(struct intel_svc_chan *chan);
+
+/**
+ * intel_svc_allocate_memory() - allocate the momory
+ * @chan: service channel assigned to the client
+ * @size: number of bytes client requests
+ *
+ * Service layer allocates the requested number of bytes from the memory
+ * pool for the client.
+ *
+ * Return: the starting address of allocated memory on success, or
+ * ERR_PTR() on error.
+ */
+void *intel_svc_allocate_memory(struct intel_svc_chan *chan, size_t size);
+
+/**
+ * intel_svc_free_memory() - free allocated memory
+ * @chan: service channel assigned to the client
+ * @kaddr: starting address of memory to be free back to pool
+ */
+void intel_svc_free_memory(struct intel_svc_chan *chan, void *kaddr);
+
+/**
+ * intel_svc_send() - send a message to the remote
+ * @chan: service channel assigned to the client
+ * @msg: message data to be sent, in the format of struct intel_svc_client_msg
+ *
+ * Return: 0 for success, -ENOMEM or -ENOBUFS on error.
+ */
+int intel_svc_send(struct intel_svc_chan *chan, void *msg);
+#endif
+
--
2.7.4
More information about the linux-arm-kernel
mailing list