[PATCH v2 0/2] Add Nintendo NES/SuperNES classic support

[Chen-Yu Tsai]

On Tue, Mar 27, 2018 at 5:28 AM, Miquel Raynal
<miquel.raynal at bootlin.com> wrote:
> This series adds support for the NES/SuperNES classic consoles from
> Nintendo. Changes are done in A23/A33 DTSI to add NAND support.
>
> Thanks,
> Miquèl
>
> Changes since v1
> ================
>
> arm: dts: sun8i: a23/a33: declare NAND pins
>  * Patch created by splitting the v1 in two
>  * Removed the trailing '@0' after the NAND pins declarations
>  * Changed the name of these declarations
>  * Declared all CS/RB lines
>  * Reorganized the pins entry of nand_pins
>
> arm: dts: nes: add Nintendo NES/SuperNES Classic Edition support
>  * Created two DTS: nes-classic and supernes-classic
>  * Moved the NAND pinctrl declaration into the DTSI
>  * Removed the USB hackery explanation
>  * Explained why one UART port is preferred to the other
>
>
> Miquel Raynal (2):
>   arm: dts: sun8i: a23/a33: declare NAND pins
>   arm: dts: nes: add Nintendo NES/SuperNES Classic Edition support

"ARM" should be uppercase. However, "arm64" should be lowercase.

ChenYu

>
>  arch/arm/boot/dts/Makefile                         |  2 +
>  arch/arm/boot/dts/sun8i-a23-a33.dtsi               | 29 ++++++++++
>  .../boot/dts/sun8i-r16-nintendo-nes-classic.dts    | 62 ++++++++++++++++++++++
>  .../dts/sun8i-r16-nintendo-supernes-classic.dts    | 17 ++++++
>  4 files changed, 110 insertions(+)
>  create mode 100644 arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts
>  create mode 100644 arch/arm/boot/dts/sun8i-r16-nintendo-supernes-classic.dts
>
> --
> 2.14.1
>