[PATCH v3 1/4] arm64: dts: renesas: r8a7795: sort subnodes of the root node
Simon Horman
horms+renesas at verge.net.au
Fri Mar 23 03:04:05 PDT 2018
Sort subnodes of the root node alphanumerically.
This is part of an ongoing effort to provide consistent node
order in the DT of Renesas SoCs to improve maintainability.
Also remove excessive line-wrapping of interrupts-extended property of
timer node.
This should not have any run-time effect.
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
v3
* Add review tag from Geert
* Move clusterX_opp should be before cpus
* Move thermal_zones should be before timer
v2
* Also sort clock nodes
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 218 +++++++++++++++----------------
1 file changed, 105 insertions(+), 113 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 1d5e3ac0231c..bb96c7e23370 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -30,6 +30,91 @@
i2c7 = &i2c_dvfs;
};
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ cluster0_opp: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <830000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <830000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <830000>;
+ clock-latency-ns = <300000>;
+ opp-suspend;
+ };
+ opp-1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <300000>;
+ turbo-mode;
+ };
+ opp-1700000000 {
+ opp-hz = /bits/ 64 <1700000000>;
+ opp-microvolt = <960000>;
+ clock-latency-ns = <300000>;
+ turbo-mode;
+ };
+ };
+
+ cluster1_opp: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <820000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <820000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <820000>;
+ clock-latency-ns = <300000>;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -155,91 +240,6 @@
clock-frequency = <0>;
};
- /*
- * The external audio clocks are configured as 0 Hz fixed frequency
- * clocks by default.
- * Boards that provide audio clocks should override them.
- */
- audio_clk_a: audio_clk_a {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- audio_clk_b: audio_clk_b {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- audio_clk_c: audio_clk_c {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- /* External CAN clock - to be overridden by boards that provide it */
- can_clk: can {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- cluster0_opp: opp_table0 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <830000>;
- clock-latency-ns = <300000>;
- };
- opp-1000000000 {
- opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = <830000>;
- clock-latency-ns = <300000>;
- };
- opp-1500000000 {
- opp-hz = /bits/ 64 <1500000000>;
- opp-microvolt = <830000>;
- clock-latency-ns = <300000>;
- opp-suspend;
- };
- opp-1600000000 {
- opp-hz = /bits/ 64 <1600000000>;
- opp-microvolt = <900000>;
- clock-latency-ns = <300000>;
- turbo-mode;
- };
- opp-1700000000 {
- opp-hz = /bits/ 64 <1700000000>;
- opp-microvolt = <960000>;
- clock-latency-ns = <300000>;
- turbo-mode;
- };
- };
-
- cluster1_opp: opp_table1 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp-800000000 {
- opp-hz = /bits/ 64 <800000000>;
- opp-microvolt = <820000>;
- clock-latency-ns = <300000>;
- };
- opp-1000000000 {
- opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = <820000>;
- clock-latency-ns = <300000>;
- };
- opp-1200000000 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <820000>;
- clock-latency-ns = <300000>;
- };
- };
-
/* External PCIe clock - can be overridden by the board */
pcie_bus_clk: pcie_bus {
compatible = "fixed-clock";
@@ -247,18 +247,6 @@
clock-frequency = <0>;
};
- pmu_a57 {
- compatible = "arm,cortex-a57-pmu";
- interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
- <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
- <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
- <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&a57_0>,
- <&a57_1>,
- <&a57_2>,
- <&a57_3>;
- };
-
pmu_a53 {
compatible = "arm,cortex-a53-pmu";
interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
@@ -271,6 +259,18 @@
<&a53_3>;
};
+ pmu_a57 {
+ compatible = "arm,cortex-a57-pmu";
+ interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a57_0>,
+ <&a57_1>,
+ <&a57_2>,
+ <&a57_3>;
+ };
+
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
@@ -2428,22 +2428,6 @@
};
};
- timer {
- compatible = "arm,armv8-timer";
- interrupts-extended = <&gic GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(8) |
- IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(8) |
- IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(8) |
- IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(8) |
- IRQ_TYPE_LEVEL_LOW)>;
- };
-
thermal-zones {
sensor_thermal1: sensor-thermal1 {
polling-delay-passive = <250>;
@@ -2524,6 +2508,14 @@
};
};
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
/* External USB clocks - can be overridden by the board */
usb3s0_clk: usb3s0 {
compatible = "fixed-clock";
--
2.11.0
More information about the linux-arm-kernel
mailing list