[PATCH v2 0/8] ARM: davinci: complete the conversion to using the reset framework
Bartosz Golaszewski
brgl at bgdev.pl
Fri Mar 23 02:36:01 PDT 2018
From: Bartosz Golaszewski <bgolaszewski at baylibre.com>
This series converts the only user of the handcoded, mach-specific reset
routines in the davinci platform to using the reset framework.
Patch 1 modifies the way lookup entries are registered with the reset
framework.
Patches 2-4 add necessary lookups/DT-properties.
Patches 5-7 convert the davinci-rproc driver to the reset framework.
Patch 8 removes now dead code.
Philipp: it turned out that it's indeed better to use the reset
controller's device name for the entry lookup.
Tested both in DT and legacy modes by booting the examples from
ti-ipc-rtos recipe in meta-ti.
This series applies on top of David Lechner's common-clk-v9 branch[1]
with Philipp Zabel's reset/next branch[2] pulled in.
It can be found in my github tree as well[3].
[1] git://github.com/dlech/ev3dev-kernel.git common-clk-v9
[2] git://git.pengutronix.de/git/pza/linux reset/next
[3] git at github.com:brgl/linux.git topic/davinci-reset
v1 -> v2:
- fixed the device tree patches the descriptions of which were mixed up
- return -EPROBE_DEFER from davinci-rproc's probe() if we can't get the
reset provider, since it's possible that the lookup table was not yet
registered
- made the local variable naming consistent in the davinci-rproc driver
- fixed a typo in PATCH 5/8
Bartosz Golaszewski (8):
reset: modify the way reset lookup works for board files
ARM: davinci: dts: make psc0 a reset provider
ARM: davinci: dts: add a reset control to the dsp node
clk: davinci: add a reset lookup table for psc0
remoteproc: da8xx: add the missing retval check for clk_enable()
remoteproc: da8xx: prepare and unprepare the clock where needed
remoteproc: da8xx: use the reset framework
clk: davinci: kill davinci_clk_reset_assert/deassert()
arch/arm/boot/dts/da850.dtsi | 2 ++
arch/arm/mach-davinci/include/mach/clock.h | 21 --------------
drivers/clk/davinci/psc-da850.c | 8 ++++++
drivers/clk/davinci/psc.c | 19 +------------
drivers/remoteproc/da8xx_remoteproc.c | 44 +++++++++++++++++++++++++-----
drivers/reset/core.c | 33 +++++++++++++++++++---
include/linux/reset-controller.h | 8 ++++--
7 files changed, 82 insertions(+), 53 deletions(-)
delete mode 100644 arch/arm/mach-davinci/include/mach/clock.h
--
2.16.1
More information about the linux-arm-kernel
mailing list