[PATCH 2/3] arm64: dts: armada-3720-espressobin: make use of switch irq line

[Andrew Lunn]

On Wed, Mar 21, 2018 at 11:50:04AM +0100, Uwe Kleine-König wrote:
> The switch's INTn line is connected to the CPU's MPP2_23 pad. Wire this
> up in the device tree. Note however that up to now the
> marvell,armada3710-sb-pinctrl driver doesn't support level irqs, so the
> switch driver doesn't make use of this feature.

Hi Uwe

So that actually happens here, if the interrupt cannot be used? I
assume the mv88e6xxx driver does not fail the probe because the IRQ
cannot be configured? What does happen?

Thanks
	Andrew