[PATCH v5 0/2] add support for Socionext SynQuacer I2C controller

[Ard Biesheuvel]

On 17 March 2018 at 00:19, Ard Biesheuvel <ard.biesheuvel at linaro.org> wrote:
> On 10 March 2018 at 15:01, Ard Biesheuvel <ard.biesheuvel at linaro.org> wrote:
>> On 2 March 2018 at 08:31, Ard Biesheuvel <ard.biesheuvel at linaro.org> wrote:
>>> Add a binding and a driver for the I2C IP found in the Socionext SynQuacer
>>> SoC, which is essentially a rebranded version of the Fujitsu F_I2C controller.
>>>
>>> I think this is good to go now. Wolfram?
>>>
>>
>> Ping?
>>
>
> Ping?
>

Hello Wolfram,

Do you intend to queue this for v4.17? Or are there any issues that
need to be addressed first?

Thanks,
Ard.


>>> v5:
>>> - add Rob's ack to #1
>>> - drop unnecessary 'platform_set_drvdata(pdev, NULL)' in remove path (#2)
>>>
>>> v4:
>>> - clarify binding that only a single interrupt specifier is expected (#1)
>>> - check return value of clk_prepare_enable() on probe path (#2)
>>> - add Andy's R-b to patch #2
>>>
>>> v3:
>>> - incorporate more of Andy's review comments (#2), especially regarding the
>>>   bus speed and clock source handling for ACPI
>>> - patch #1 unchanged.
>>>
>>> v2:
>>> - incorporate Andy's review comments (#2)
>>> - patch #1 unchanged.
>>>
>>> Ard Biesheuvel (2):
>>>   dt-bindings: i2c: add binding for Socionext SynQuacer I2C
>>>   i2c: add support for Socionext SynQuacer I2C controller
>>>
>>>  Documentation/devicetree/bindings/i2c/i2c-synquacer.txt |  29 +
>>>  drivers/i2c/busses/Kconfig                              |  10 +
>>>  drivers/i2c/busses/Makefile                             |   1 +
>>>  drivers/i2c/busses/i2c-synquacer.c                      | 791 ++++++++++++++++++++
>>>  4 files changed, 831 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-synquacer.txt
>>>  create mode 100644 drivers/i2c/busses/i2c-synquacer.c
>>>
>>> --
>>> 2.11.0
>>>