Failed to boot ARM64 boards for recent linux-next

Marc Zyngier marc.zyngier at arm.com
Tue Mar 20 03:33:31 PDT 2018


On 20/03/18 09:39, Shawn Lin wrote:
> Hi Marc
> 
> On 2018/3/20 17:32, Shawn Lin wrote:
>> Hi Marc,
>>
>> On 2018/3/20 17:01, Marc Zyngier wrote:
>>> Hi Shawn,
>>>
>>> On 20/03/18 08:48, Shawn Lin wrote:
>>>> Hi Marc,
>>>>
>>>>       I was able to boot my RK3399 board with in linux-next-20180314,
>>>> but not today. My bisect robot shows me it was introduced by
>>>>
>>>> commit d6062a6d62c643a06c393745d032da3e6441d4bd
>>>> Author: Marc Zyngier <marc.zyngier at arm.com>
>>>> Date:   Fri Mar 9 14:53:19 2018 +0000
>>>>
>>>>       irqchip/gic-v3: Reset APgRn registers at boot time
>>>>
>>>>       Booting a crash kernel while in an interrupt handler is likely
>>>>       to leave the Active Priority Registers with some state that
>>>>       is not relevant to the new kernel, and is likely to lead
>>>>       to erratic behaviours such as interrupts not firing as their
>>>>       priority is already active.
>>>>
>>>>       As a sanity measure, wipe the APRs clean on startup. We make
>>>>       sure to wipe both group 0 and 1 registers in order to avoid
>>>>       any surprise.
>>>>
>>>>
>>>> The panic log is here:
>>>> https://paste.ubuntu.com/p/7WrJJDG6JQ/
>>>>
>>>> Is it a known issue or is there a coming patch for that?
>>>
>>>   Interesting. No, that wasn't the intention, but I may have missed a key
>>> detail (group 0 access traps to EL3 if SCR_EL3.FIQ==1). Can you have a
>>> go at the following hack, just to narrow it down:
>>>
>>> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
>>> index 5bb7bb22f1c1..f8ff43b1d4f8 100644
>>> --- a/drivers/irqchip/irq-gic-v3.c
>>> +++ b/drivers/irqchip/irq-gic-v3.c
>>> @@ -570,16 +570,12 @@ static void gic_cpu_sys_reg_init(void)
>>>       switch(val + 1) {
>>>       case 8:
>>>       case 7:
>>> -        write_gicreg(0, ICC_AP0R3_EL1);
>>>           write_gicreg(0, ICC_AP1R3_EL1);
>>> -        write_gicreg(0, ICC_AP0R2_EL1);
>>>           write_gicreg(0, ICC_AP1R2_EL1);
>>>       case 6:
>>> -        write_gicreg(0, ICC_AP0R1_EL1);
>>>           write_gicreg(0, ICC_AP1R1_EL1);
>>>       case 5:
>>>       case 4:
>>> -        write_gicreg(0, ICC_AP0R0_EL1);
>>>           write_gicreg(0, ICC_AP1R0_EL1);
>>>       }
>>>
>>> Let me know if that helps.
>>>
>>
>> It works for me. Thanks!
> 
> 
> Also another patch warns a lot when booting the kernel. Is there
> anything else I could do to let it go? Seems I am using broken
> dts for requesting IRQ_TYPE_NONE there?

Indeed. IRQ_TYPE_NONE is not something you should ever feed to the GIC.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...



More information about the linux-arm-kernel mailing list