[PATCH v3 09/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file

Sricharan R sricharan at codeaurora.org
Mon Mar 19 20:58:52 PDT 2018


Reviewed-by: Abhishek Sahu <absahu at codeaurora.org>
Signed-off-by: Sricharan R <sricharan at codeaurora.org>
---
 arch/arm/boot/dts/Makefile                      |  1 +
 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 65 +++++++++++++++++++++++++
 2 files changed, 66 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b71487a..8c93fd0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -749,6 +749,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-ipq4019-ap.dk01.1-c1.dtb \
 	qcom-ipq4019-ap.dk04.1-c1.dtb \
 	qcom-ipq4019-ap.dk04.1-c3.dtb \
+	qcom-ipq4019-ap.dk07.1-c1.dtb \
 	qcom-ipq8064-ap148.dtb \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb \
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
new file mode 100644
index 0000000..e4fddc1
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019-ap.dk07.1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
+
+	soc {
+		pcie0: pci at 40000000 {
+			status = "ok";
+			perst-gpio = <&tlmm 38 0x1>;
+		};
+
+		spi_1: spi at 78b6000 { /* BLSP1 QUP2 */
+			status = "ok";
+		};
+
+		pinctrl at 1000000 {
+			serial_1_pins: serial1_pinmux {
+				mux {
+					pins = "gpio8", "gpio9",
+						"gpio10", "gpio11";
+					function = "blsp_uart1";
+					bias-disable;
+				};
+			};
+
+			spi_0_pins: spi_0_pinmux {
+				pinmux {
+					function = "blsp_spi0";
+					pins = "gpio13", "gpio14", "gpio15";
+					bias-disable;
+				};
+				pinmux_cs {
+					function = "gpio";
+					pins = "gpio12";
+					bias-disable;
+					output-high;
+				};
+			};
+		};
+
+		serial at 78b0000 {
+			pinctrl-0 = <&serial_1_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+		};
+
+		spi_0: spi at 78b5000 { /* BLSP1 QUP1 */
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+			cs-gpios = <&tlmm 12 0>;
+
+			m25p80 at 0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				compatible = "n25q128a11";
+				spi-max-frequency = <24000000>;
+			};
+		};
+	};
+};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation




More information about the linux-arm-kernel mailing list