[PATCH v1 10/19] arm: dts: mt7623: remove useless property pinctrl-names at node switch at 0

[Matthias Brugger]

On 02/23/2018 11:16 AM, sean.wang at mediatek.com wrote:
> From: Sean Wang <sean.wang at mediatek.com>
> 
> The property pinctrl-names is totally superfluous. It would be good to
> remove the property to keep the node neatness. There is actually
> unnecessary to set up any pins for data path TRGMII between main SoC and
> MT7530. Furthermore, it's more reasonable for the pin setup of control
> path MDIO bus is being placed inside the node of ethernet controller.
> 
> Signed-off-by: Sean Wang <sean.wang at mediatek.com>

Pushed to v4.16-next/dts32

Thanks!

> ---
>  arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> index 6b760be..f2d3cfb 100644
> --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> @@ -151,7 +151,6 @@
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  			reg = <0>;
> -			pinctrl-names = "default";
>  			reset-gpios = <&pio 33 0>;
>  			core-supply = <&mt6323_vpa_reg>;
>  			io-supply = <&mt6323_vemc3v3_reg>;
>