[PATCH 1/2] ARM: dts: pfuze3000: update sw1a/vldo4 voltage range

Fabio Estevam festevam at gmail.com
Sat Mar 17 07:53:08 PDT 2018


Hi Anson,

On Sat, Mar 17, 2018 at 3:57 AM, Anson Huang <Anson.Huang at nxp.com> wrote:
> Update sw1a/vldo4's voltage range according to latest pfuze3000
> datasheet from:
>
> http://cache.freescale.com/files/analog/doc/data_sheet/PF3000.pdf?fsrch=1&sr=1&pageNum=1
>
> Signed-off-by: Anson Huang <Anson.Huang at nxp.com>
> Signed-off-by: Robin Gong <yibin.gong at nxp.com>
> ---
>  arch/arm/boot/dts/imx6sx-udoo-neo.dtsi  | 2 +-
>  arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 4 ++--
>  arch/arm/boot/dts/imx7d-nitrogen7.dts   | 2 +-
>  arch/arm/boot/dts/imx7d-sdb.dts         | 6 +++---
>  arch/arm/boot/dts/imx7s-warp.dts        | 2 +-
>  5 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
> index 53b3eac..1de0a0f 100644
> --- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
> +++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
> @@ -142,7 +142,7 @@
>                 regulators {
>                         sw1a_reg: sw1a {
>                                 regulator-min-microvolt = <700000>;
> -                               regulator-max-microvolt = <1475000>;
> +                               regulator-max-microvolt = <3300000>;

This change does not look like a safe thing to do without carefully
checking each one of the board schematics.

Even if the regulator itself is capable of driving a higher voltage,
it does not mean that the circuitry that consumes such regulator is
allowed to receive the higher voltages.



More information about the linux-arm-kernel mailing list