[PATCH 14/47] ARM: dts: r8a7791: sort subnodes of root node

[Simon Horman]

Sort subnodes of root node to aid maintenance.

This patch should not introduce any functional change.

Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
 arch/arm/boot/dts/r8a7791.dtsi | 134 ++++++++++++++++++++---------------------
 1 file changed, 67 insertions(+), 67 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index de2af2199731..dc659351472f 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -39,6 +39,35 @@
 		vin2 = &vin2;
 	};
 
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -82,23 +111,27 @@
 		};
 	};
 
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive	= <0>;
-			polling-delay		= <0>;
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
 
-			thermal-sensors = <&thermal>;
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
 
-			trips {
-				cpu-crit {
-					temperature	= <95000>;
-					hysteresis	= <0>;
-					type		= "critical";
-				};
-			};
-			cooling-maps {
-			};
-		};
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
 	};
 
 	soc {
@@ -1668,6 +1701,25 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive	= <0>;
+			polling-delay		= <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature	= <95000>;
+					hysteresis	= <0>;
+					type		= "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
@@ -1676,62 +1728,10 @@
 				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	/* External root clock */
-	extal_clk: extal {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
-	/*
-	 * The external audio clocks are configured as 0 Hz fixed frequency
-	 * clocks by default.
-	 * Boards that provide audio clocks should override them.
-	 */
-	audio_clk_a: audio_clk_a {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-	audio_clk_b: audio_clk_b {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-	audio_clk_c: audio_clk_c {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	/* External PCIe clock - can be overridden by the board */
-	pcie_bus_clk: pcie_bus {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	/* External SCIF clock */
-	scif_clk: scif {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
-
 	/* External USB clock - can be overridden by the board */
 	usb_extal_clk: usb_extal {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
 	};
-
-	/* External CAN clock */
-	can_clk: can {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		/* This value must be overridden by the board. */
-		clock-frequency = <0>;
-	};
 };
-- 
2.11.0