[PATCH 04/52] ARM: dts: lager: Add CEC clock for HDMI transmitter

[Simon Horman]

From: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>

The adv7511 on the Lager board has a 12 MHz fixed clock
for the CEC block. Specify this in the dts to enable CEC support.

Based on a similar patch for Koelsch by Hans Verkuil.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>
Tested-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index f2ea632381e7..7892b113ecaa 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -669,11 +669,19 @@
 		};
 	};
 
+	cec_clock: cec-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
 	hdmi at 39 {
 		compatible = "adi,adv7511w";
 		reg = <0x39>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&cec_clock>;
+		clock-names = "cec";
 
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
-- 
2.11.0