[v2] ARM: davinci: fix the GPIO lookup for omapl138-hawk

[Sekhar Nori]

On Thursday 15 March 2018 10:05 PM, David Lechner wrote:
> On 03/01/2018 04:34 AM, Bartosz Golaszewski wrote:
>> From: Bartosz Golaszewski <bgolaszewski at baylibre.com>
>>
>> The GPIO chip is called davinci_gpio.0 in legacy mode. Fix it, so that
>> mmc can correctly lookup the wp and cp gpios.
>>
>> Fixes: c69f43fb4f26 ("ARM: davinci: hawk: use gpio descriptor for mmc
>> pins")
>> Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
>> Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
>> Signed-off-by: Sekhar Nori <nsekhar at ti.com>
>> ---
>> v1 -> v2:
>> - added the Fixes: tag
>>
>>   arch/arm/mach-davinci/board-omapl138-hawk.c | 4 ++--
>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c
>> b/arch/arm/mach-davinci/board-omapl138-hawk.c
>> index a3e78074be70..62eb7d668890 100644
>> --- a/arch/arm/mach-davinci/board-omapl138-hawk.c
>> +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
>> @@ -127,8 +127,8 @@ static struct gpiod_lookup_table mmc_gpios_table = {
>>       .dev_id = "da830-mmc.0",
>>       .table = {
>>           /* CD: gpio3_12: gpio60: chip 1 contains gpio range 32-63*/
>> -        GPIO_LOOKUP("davinci_gpio.1", 28, "cd", GPIO_ACTIVE_LOW),
>> -        GPIO_LOOKUP("davinci_gpio.1", 29, "wp", GPIO_ACTIVE_LOW),
>> +        GPIO_LOOKUP("davinci_gpio.0", 28, "cd", GPIO_ACTIVE_LOW),
>> +        GPIO_LOOKUP("davinci_gpio.0", 29, "wp", GPIO_ACTIVE_LOW),
>>       },
>>   };
>>  
> 
> Does board-da830-evm.c need the same fix? It also uses "davinci_gpio.1".

Yes. looks like fixes are needed here and other places. I will send
patches since I have ability to test them.

Thanks,
Sekhar