[PATCH v2 05/13] ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi
Abhishek Sahu
absahu at codeaurora.org
Fri Mar 16 03:21:15 PDT 2018
On 2018-03-16 15:08, Sricharan R wrote:
> Add the common parts for the dk04 boards.
>
> Signed-off-by: Sricharan R <sricharan at codeaurora.org>
Reviewed-by: Abhishek Sahu <absahu at codeaurora.org>
> ---
> arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 129
> ++++++++++++++++++++++++++
> 1 file changed, 129 insertions(+)
> create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
>
> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
> b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
> new file mode 100644
> index 0000000..96ce081
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
> @@ -0,0 +1,129 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018, The Linux Foundation. All rights reserved.
> +
> +#include "qcom-ipq4019.dtsi"
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
> + compatible = "qcom,ipq4019";
> +
> + memory {
> + device_type = "memory";
> + reg = <0x80000000 0x10000000>; /* 256MB */
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + rsvd1 at 87000000 {
> + /* Reserved for other subsystem */
> + reg = <0x87000000 0x500000>;
> + no-map;
> + };
> +
> + wifi_dump at 87500000 {
> + reg = <0x87500000 0x600000>;
> + no-map;
> + };
> +
> + rsvd2 at 87B00000 {
> + /* Reserved for other subsystem */
> + reg = <0x87B00000 0x500000>;
> + no-map;
> + };
> + };
> +
> + soc {
> + pinctrl at 1000000 {
> + serial_0_pins: serial0_pinmux {
> + mux {
> + pins = "gpio16", "gpio17";
> + function = "blsp_uart0";
> + bias-disable;
> + };
> + };
> +
> + serial_1_pins: serial1_pinmux {
> + mux {
> + pins = "gpio8", "gpio9",
> + "gpio10", "gpio11";
> + function = "blsp_uart1";
> + bias-disable;
> + };
> + };
> +
> + spi_0_pins: spi_0_pinmux {
> + pinmux {
> + function = "blsp_spi0";
> + pins = "gpio13", "gpio14", "gpio15";
> + bias-disable;
> + };
> + pinmux_cs {
> + function = "gpio";
> + pins = "gpio12";
> + bias-disable;
> + output-high;
> + };
> + };
> +
> + i2c_0_pins: i2c_0_pinmux {
> + mux {
> + pins = "gpio20", "gpio21";
> + function = "blsp_i2c0";
> + bias-disable;
> + };
> + };
> +
> + nand_pins: nand_pins {
> + mux {
> + pins = "gpio53", "gpio55", "gpio56",
> + "gpio57", "gpio58", "gpio59",
> + "gpio60", "gpio62", "gpio63",
> + "gpio64", "gpio65", "gpio66",
> + "gpio67", "gpio68", "gpio69";
> + function = "qpic";
> + };
> + };
> + };
> +
> + serial at 78af000 {
> + pinctrl-0 = <&serial_0_pins>;
> + pinctrl-names = "default";
> + status = "ok";
> + };
> +
> + serial at 78b0000 {
> + pinctrl-0 = <&serial_1_pins>;
> + pinctrl-names = "default";
> + status = "ok";
> + };
> +
> + blsp_dma: dma at 7884000 {
> + status = "ok";
> + };
> +
> + spi_0: spi at 78b5000 { /* BLSP1 QUP1 */
> + pinctrl-0 = <&spi_0_pins>;
> + pinctrl-names = "default";
> + status = "ok";
> + cs-gpios = <&tlmm 12 0>;
> +
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0>;
> + compatible = "n25q128a11";
> + spi-max-frequency = <24000000>;
> + };
> + };
> +
> + pcie0: pci at 40000000 {
> + status = "ok";
> + perst-gpio = <&tlmm 38 0x1>;
> + };
> + };
> +};
More information about the linux-arm-kernel
mailing list