[PATCH v8 27/42] ARM: davinci: da8xx: add new USB PHY clock init using common clock framework
David Lechner
david at lechnology.com
Thu Mar 15 19:52:43 PDT 2018
This adds the new USB PHY clock init in mach-davinci/usb-da8xx.c using
the new common clock framework drivers.
The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.
Signed-off-by: David Lechner <david at lechnology.com>
---
v8 changes:
- rebased on "ARM: davinci: DA8XX: fix oops in USB PHY driver due to stack
allocated platform platform_data"
v7 changes:
- register platform device instead of registering clocks directly
- USB PHY clocks now treated as single device instead of registering them
separately
v6 changes:
- rename stuff to match changes in "clk: davinci: New driver for TI DA8XX USB
PHY clocks"
- take advantage of syscon lookup changes in "mfd: syscon: Add syscon_register()
function"
arch/arm/mach-davinci/board-da830-evm.c | 8 +++++++-
arch/arm/mach-davinci/board-omapl138-hawk.c | 9 +++++++--
arch/arm/mach-davinci/da8xx-dt.c | 8 +++++++-
arch/arm/mach-davinci/include/mach/da8xx.h | 1 +
arch/arm/mach-davinci/usb-da8xx.c | 26 ++++++++++++++++++++++++--
5 files changed, 46 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 3973124..6e77c45 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -110,6 +110,12 @@ static __init void da830_evm_usb_init(void)
{
int ret;
+#ifdef CONFIG_COMMON_CLK
+ ret = da8xx_register_usb_phy_clocks();
+ if (ret)
+ pr_warn("%s: USB PHY CLK registration failed: %d\n",
+ __func__, ret);
+#else
/* USB_REFCLKIN is not used. */
ret = da8xx_register_usb20_phy_clk(false);
if (ret)
@@ -120,7 +126,7 @@ static __init void da830_evm_usb_init(void)
if (ret)
pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n",
__func__, ret);
-
+#endif
ret = da8xx_register_usb_phy();
if (ret)
pr_warn("%s: USB PHY registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index eb09e33..6a866d2 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -231,7 +231,12 @@ static __init void omapl138_hawk_usb_init(void)
pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
return;
}
-
+#ifdef CONFIG_COMMON_CLK
+ ret = da8xx_register_usb_phy_clocks();
+ if (ret)
+ pr_warn("%s: USB PHY CLK registration failed: %d\n",
+ __func__, ret);
+#else
ret = da8xx_register_usb20_phy_clk(false);
if (ret)
pr_warn("%s: USB 2.0 PHY CLK registration failed: %d\n",
@@ -241,7 +246,7 @@ static __init void omapl138_hawk_usb_init(void)
if (ret)
pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n",
__func__, ret);
-
+#endif
ret = da8xx_register_usb_phy();
if (ret)
pr_warn("%s: USB PHY registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 91dd9cb..c4edf05 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -69,6 +69,12 @@ static void __init da850_init_machine(void)
da850_register_clocks();
+#ifdef CONFIG_COMMON_CLK
+ ret = da8xx_register_usb_phy_clocks();
+ if (ret)
+ pr_warn("%s: USB PHY CLK registration failed: %d\n",
+ __func__, ret);
+#else
ret = da8xx_register_usb20_phy_clk(false);
if (ret)
pr_warn("%s: registering USB 2.0 PHY clock failed: %d",
@@ -77,7 +83,7 @@ static void __init da850_init_machine(void)
if (ret)
pr_warn("%s: registering USB 1.1 PHY clock failed: %d",
__func__, ret);
-
+#endif
ret = da850_register_sata_refclk(sata_refclkpn);
if (ret)
pr_warn("%s: registering SATA REFCLK failed: %d",
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 612e454..5d7b1de 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -106,6 +106,7 @@ int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
int da8xx_register_usb_refclkin(int rate);
int da8xx_register_usb20_phy_clk(bool use_usb_refclkin);
int da8xx_register_usb11_phy_clk(bool use_usb_refclkin);
+int da8xx_register_usb_phy_clocks(void);
int da850_register_sata_refclk(int rate);
int da8xx_register_emac(void);
int da8xx_register_uio_pruss(void);
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
index 67d634b..d0ba725 100644
--- a/arch/arm/mach-davinci/usb-da8xx.c
+++ b/arch/arm/mach-davinci/usb-da8xx.c
@@ -2,29 +2,35 @@
/*
* DA8xx USB
*/
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/mfd/da8xx-cfgchip.h>
+#include <linux/mfd/syscon.h>
#include <linux/phy/phy.h>
+#include <linux/platform_data/clk-da8xx-cfgchip.h>
#include <linux/platform_data/phy-da8xx-usb.h>
#include <linux/platform_data/usb-davinci.h>
#include <linux/platform_device.h>
#include <linux/usb/musb.h>
-#include <mach/clock.h>
#include <mach/common.h>
#include <mach/cputype.h>
#include <mach/da8xx.h>
#include <mach/irqs.h>
+#ifndef CONFIG_COMMON_CLK
+#include <mach/clock.h>
#include "clock.h"
+#endif
#define DA8XX_USB0_BASE 0x01e00000
#define DA8XX_USB1_BASE 0x01e25000
+#ifndef CONFIG_COMMON_CLK
static struct clk *usb20_clk;
+#endif
static struct da8xx_usb_phy_platform_data da8xx_usb_phy_pdata;
@@ -136,6 +142,7 @@ int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
return platform_device_register(&da8xx_usb11_device);
}
+#ifndef CONFIG_COMMON_CLK
static struct clk usb_refclkin = {
.name = "usb_refclkin",
.set_rate = davinci_simple_set_rate,
@@ -362,3 +369,18 @@ int __init da8xx_register_usb11_phy_clk(bool use_usb_refclkin)
return ret;
}
+#endif
+static struct platform_device da8xx_usb_phy_clks_device = {
+ .name = "da830-usb-phy-clks",
+ .id = -1,
+};
+
+int __init da8xx_register_usb_phy_clocks(void)
+{
+ struct da8xx_cfgchip_clk_platform_data pdata;
+
+ pdata.cfgchip = da8xx_get_cfgchip();
+ da8xx_usb_phy_clks_device.dev.platform_data = &pdata;
+
+ return platform_device_register(&da8xx_usb_phy_clks_device);
+}
--
2.7.4
More information about the linux-arm-kernel
mailing list