[PATCH v8 19/42] clk: davinci: cfgchip: Add TI DA8XX USB PHY clocks
David Lechner
david at lechnology.com
Thu Mar 15 19:52:35 PDT 2018
This adds a new driver for the USB PHY clocks in the CFGCHIP2 syscon
register on TI DA8XX-type SoCs.
The USB0 (USB 2.0) PHY clock is an interesting case because it calls
clk_enable() in a reentrant way. The USB 2.0 PSC only has to be enabled
temporarily while we are locking the PLL, which takes place during the
clk_enable() callback.
Signed-off-by: David Lechner <david at lechnology.com>
---
v8 changes:
- none
v7 changes:
- convert to platform device
- rename clk local variable to usb0/usb1
- put code in da8xx-cfgchip.c instead of creating a new file
v6 changes:
- rename clocks to usb{0,1}_clk48
- rename USB 2.0 PSC clock to "fck"
- simplify {s,g}et_parent implementations
- use pr_fmt macro
drivers/clk/davinci/da8xx-cfgchip.c | 351 ++++++++++++++++++++++++++++++++++++
1 file changed, 351 insertions(+)
diff --git a/drivers/clk/davinci/da8xx-cfgchip.c b/drivers/clk/davinci/da8xx-cfgchip.c
index f0bdfea..858d378 100644
--- a/drivers/clk/davinci/da8xx-cfgchip.c
+++ b/drivers/clk/davinci/da8xx-cfgchip.c
@@ -343,6 +343,349 @@ static int __init of_da850_async3_init(struct device *dev, struct regmap *regmap
return of_da8xx_cfgchip_init_mux_clock(dev, &da850_async3_info, regmap);
}
+/* --- USB 2.0 PHY clock --- */
+
+struct da8xx_usb0_clk48 {
+ struct clk_hw hw;
+ struct clk *fck;
+ struct regmap *regmap;
+};
+
+#define to_da8xx_usb0_clk48(_hw) \
+ container_of((_hw), struct da8xx_usb0_clk48, hw)
+
+static int da8xx_usb0_clk48_prepare(struct clk_hw *hw)
+{
+ struct da8xx_usb0_clk48 *usb0 = to_da8xx_usb0_clk48(hw);
+
+ /* The USB 2.0 PSC clock is only needed temporarily during the USB 2.0
+ * PHY clock enable, but since clk_prepare() can't be called in an
+ * atomic context (i.e. in clk_enable()), we have to prepare it here.
+ */
+ return clk_prepare(usb0->fck);
+}
+
+static void da8xx_usb0_clk48_unprepare(struct clk_hw *hw)
+{
+ struct da8xx_usb0_clk48 *usb0 = to_da8xx_usb0_clk48(hw);
+
+ clk_unprepare(usb0->fck);
+}
+
+static int da8xx_usb0_clk48_enable(struct clk_hw *hw)
+{
+ struct da8xx_usb0_clk48 *usb0 = to_da8xx_usb0_clk48(hw);
+ unsigned int mask, val;
+ int ret;
+
+ /* Locking the USB 2.O PLL requires that the USB 2.O PSC is enabled
+ * temporaily. It can be turned back off once the PLL is locked.
+ */
+ clk_enable(usb0->fck);
+
+ /* Turn on the USB 2.0 PHY, but just the PLL, and not OTG. The USB 1.1
+ * PHY may use the USB 2.0 PLL clock without USB 2.0 OTG being used.
+ */
+ mask = CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_PHY_PLLON;
+ val = CFGCHIP2_PHY_PLLON;
+
+ regmap_write_bits(usb0->regmap, CFGCHIP(2), mask, val);
+ ret = regmap_read_poll_timeout(usb0->regmap, CFGCHIP(2), val,
+ val & CFGCHIP2_PHYCLKGD, 0, 500000);
+
+ clk_disable(usb0->fck);
+
+ return ret;
+}
+
+static void da8xx_usb0_clk48_disable(struct clk_hw *hw)
+{
+ struct da8xx_usb0_clk48 *usb0 = to_da8xx_usb0_clk48(hw);
+ unsigned int val;
+
+ val = CFGCHIP2_PHYPWRDN;
+ regmap_write_bits(usb0->regmap, CFGCHIP(2), val, val);
+}
+
+static int da8xx_usb0_clk48_is_enabled(struct clk_hw *hw)
+{
+ struct da8xx_usb0_clk48 *usb0 = to_da8xx_usb0_clk48(hw);
+ unsigned int val;
+
+ regmap_read(usb0->regmap, CFGCHIP(2), &val);
+
+ return !!(val & CFGCHIP2_PHYCLKGD);
+}
+
+static unsigned long da8xx_usb0_clk48_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct da8xx_usb0_clk48 *usb0 = to_da8xx_usb0_clk48(hw);
+ unsigned int mask, val;
+
+ /* The parent clock rate must be one of the following */
+ mask = CFGCHIP2_REFFREQ_MASK;
+ switch (parent_rate) {
+ case 12000000:
+ val = CFGCHIP2_REFFREQ_12MHZ;
+ break;
+ case 13000000:
+ val = CFGCHIP2_REFFREQ_13MHZ;
+ break;
+ case 19200000:
+ val = CFGCHIP2_REFFREQ_19_2MHZ;
+ break;
+ case 20000000:
+ val = CFGCHIP2_REFFREQ_20MHZ;
+ break;
+ case 24000000:
+ val = CFGCHIP2_REFFREQ_24MHZ;
+ break;
+ case 26000000:
+ val = CFGCHIP2_REFFREQ_26MHZ;
+ break;
+ case 38400000:
+ val = CFGCHIP2_REFFREQ_38_4MHZ;
+ break;
+ case 40000000:
+ val = CFGCHIP2_REFFREQ_40MHZ;
+ break;
+ case 48000000:
+ val = CFGCHIP2_REFFREQ_48MHZ;
+ break;
+ default:
+ return 0;
+ }
+
+ regmap_write_bits(usb0->regmap, CFGCHIP(2), mask, val);
+
+ /* USB 2.0 PLL always supplies 48MHz */
+ return 48000000;
+}
+
+static long da8xx_usb0_clk48_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ return 48000000;
+}
+
+static int da8xx_usb0_clk48_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct da8xx_usb0_clk48 *usb0 = to_da8xx_usb0_clk48(hw);
+
+ return regmap_write_bits(usb0->regmap, CFGCHIP(2),
+ CFGCHIP2_USB2PHYCLKMUX,
+ index ? CFGCHIP2_USB2PHYCLKMUX : 0);
+}
+
+static u8 da8xx_usb0_clk48_get_parent(struct clk_hw *hw)
+{
+ struct da8xx_usb0_clk48 *usb0 = to_da8xx_usb0_clk48(hw);
+ unsigned int val;
+
+ regmap_read(usb0->regmap, CFGCHIP(2), &val);
+
+ return (val & CFGCHIP2_USB2PHYCLKMUX) ? 1 : 0;
+}
+
+static const struct clk_ops da8xx_usb0_clk48_ops = {
+ .prepare = da8xx_usb0_clk48_prepare,
+ .unprepare = da8xx_usb0_clk48_unprepare,
+ .enable = da8xx_usb0_clk48_enable,
+ .disable = da8xx_usb0_clk48_disable,
+ .is_enabled = da8xx_usb0_clk48_is_enabled,
+ .recalc_rate = da8xx_usb0_clk48_recalc_rate,
+ .round_rate = da8xx_usb0_clk48_round_rate,
+ .set_parent = da8xx_usb0_clk48_set_parent,
+ .get_parent = da8xx_usb0_clk48_get_parent,
+};
+
+static struct da8xx_usb0_clk48 *
+da8xx_cfgchip_register_usb0_clk48(struct device *dev,
+ struct regmap *regmap)
+{
+ const char * const parent_names[] = { "usb_refclkin", "pll0_auxclk" };
+ struct clk *fck_clk;
+ struct da8xx_usb0_clk48 *usb0;
+ struct clk_init_data init;
+ int ret;
+
+ fck_clk = devm_clk_get(dev, "fck");
+ if (IS_ERR(fck_clk)) {
+ if (PTR_ERR(fck_clk) != -EPROBE_DEFER)
+ dev_err(dev, "Missing fck clock\n");
+ return ERR_CAST(fck_clk);
+ }
+
+ usb0 = devm_kzalloc(dev, sizeof(*usb0), GFP_KERNEL);
+ if (!usb0)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = "usb0_clk48";
+ init.ops = &da8xx_usb0_clk48_ops;
+ init.parent_names = parent_names;
+ init.num_parents = 2;
+
+ usb0->hw.init = &init;
+ usb0->fck = fck_clk;
+ usb0->regmap = regmap;
+
+ ret = devm_clk_hw_register(dev, &usb0->hw);
+ if (ret < 0)
+ return ERR_PTR(ret);
+
+ return usb0;
+}
+
+/* --- USB 1.1 PHY clock --- */
+
+struct da8xx_usb1_clk48 {
+ struct clk_hw hw;
+ struct regmap *regmap;
+};
+
+#define to_da8xx_usb1_clk48(_hw) \
+ container_of((_hw), struct da8xx_usb1_clk48, hw)
+
+static int da8xx_usb1_clk48_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct da8xx_usb1_clk48 *usb1 = to_da8xx_usb1_clk48(hw);
+
+ return regmap_write_bits(usb1->regmap, CFGCHIP(2),
+ CFGCHIP2_USB1PHYCLKMUX,
+ index ? CFGCHIP2_USB1PHYCLKMUX : 0);
+}
+
+static u8 da8xx_usb1_clk48_get_parent(struct clk_hw *hw)
+{
+ struct da8xx_usb1_clk48 *usb1 = to_da8xx_usb1_clk48(hw);
+ unsigned int val;
+
+ regmap_read(usb1->regmap, CFGCHIP(2), &val);
+
+ return (val & CFGCHIP2_USB1PHYCLKMUX) ? 1 : 0;
+}
+
+static const struct clk_ops da8xx_usb1_clk48_ops = {
+ .set_parent = da8xx_usb1_clk48_set_parent,
+ .get_parent = da8xx_usb1_clk48_get_parent,
+};
+
+/**
+ * da8xx_cfgchip_register_usb1_clk48 - Register a new USB 1.1 PHY clock
+ * @regmap: The CFGCHIP regmap
+ */
+static struct da8xx_usb1_clk48 *
+da8xx_cfgchip_register_usb1_clk48(struct device *dev,
+ struct regmap *regmap)
+{
+ const char * const parent_names[] = { "usb0_clk48", "usb_refclkin" };
+ struct da8xx_usb1_clk48 *usb1;
+ struct clk_init_data init;
+ int ret;
+
+ usb1 = devm_kzalloc(dev, sizeof(*usb1), GFP_KERNEL);
+ if (!usb1)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = "usb1_clk48";
+ init.ops = &da8xx_usb1_clk48_ops;
+ init.parent_names = parent_names;
+ init.num_parents = 2;
+
+ usb1->hw.init = &init;
+ usb1->regmap = regmap;
+
+ ret = devm_clk_hw_register(dev, &usb1->hw);
+ if (ret < 0)
+ return ERR_PTR(ret);
+
+ return usb1;
+}
+
+static int da8xx_cfgchip_register_usb_phy_clk(struct device *dev,
+ struct regmap *regmap)
+{
+ struct da8xx_usb0_clk48 *usb0;
+ struct da8xx_usb1_clk48 *usb1;
+ struct clk_hw *parent;
+
+ usb0 = da8xx_cfgchip_register_usb0_clk48(dev, regmap);
+ if (IS_ERR(usb0))
+ return PTR_ERR(usb0);
+
+ /*
+ * All existing boards use pll0_auxclk as the parent and new boards
+ * should use device tree, so hard-coding the value (1) here.
+ */
+ parent = clk_hw_get_parent_by_index(&usb0->hw, 1);
+ if (parent)
+ clk_set_parent(usb0->hw.clk, parent->clk);
+ else
+ dev_warn(dev, "Failed to find usb0 parent clock\n");
+
+ usb1 = da8xx_cfgchip_register_usb1_clk48(dev, regmap);
+ if (IS_ERR(usb1))
+ return PTR_ERR(usb1);
+
+ /*
+ * All existing boards use usb0_clk48 as the parent and new boards
+ * should use device tree, so hard-coding the value (0) here.
+ */
+ parent = clk_hw_get_parent_by_index(&usb1->hw, 0);
+ if (parent)
+ clk_set_parent(usb1->hw.clk, parent->clk);
+ else
+ dev_warn(dev, "Failed to find usb1 parent clock\n");
+
+ clk_hw_register_clkdev(&usb0->hw, "usb0_clk48", "da8xx-usb-phy");
+ clk_hw_register_clkdev(&usb1->hw, "usb1_clk48", "da8xx-usb-phy");
+
+ return 0;
+}
+
+static int of_da8xx_usb_phy_clk_init(struct device *dev, struct regmap *regmap)
+{
+ struct clk_hw_onecell_data *clk_data;
+ struct da8xx_usb0_clk48 *usb0;
+ struct da8xx_usb1_clk48 *usb1;
+
+ clk_data = devm_kzalloc(dev, sizeof(*clk_data) + 2 *
+ sizeof(*clk_data->hws), GFP_KERNEL);
+ if (!clk_data)
+ return -ENOMEM;
+
+ clk_data->num = 2;
+
+ usb0 = da8xx_cfgchip_register_usb0_clk48(dev, regmap);
+ if (IS_ERR(usb0)) {
+ if (PTR_ERR(usb0) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ dev_warn(dev, "Failed to register usb0_clk48 (%ld)\n",
+ PTR_ERR(usb0));
+
+ clk_data->hws[0] = ERR_PTR(-ENOENT);
+ } else {
+ clk_data->hws[0] = &usb0->hw;
+ }
+
+ usb1 = da8xx_cfgchip_register_usb1_clk48(dev, regmap);
+ if (IS_ERR(usb1)) {
+ if (PTR_ERR(usb0) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ dev_warn(dev, "Failed to register usb1_clk48 (%ld)\n",
+ PTR_ERR(usb1));
+
+ clk_data->hws[1] = ERR_PTR(-ENOENT);
+ } else {
+ clk_data->hws[1] = &usb1->hw;
+ }
+
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_data);
+}
+
/* --- platform device --- */
static const struct of_device_id da8xx_cfgchip_of_match[] = {
@@ -362,6 +705,10 @@ static const struct of_device_id da8xx_cfgchip_of_match[] = {
.compatible = "ti,da850-async3-clksrc",
.data = of_da850_async3_init,
},
+ {
+ .compatible = "ti,da830-usb-phy-clocks",
+ .data = of_da8xx_usb_phy_clk_init,
+ },
{ }
};
@@ -382,6 +729,10 @@ static const struct platform_device_id da8xx_cfgchip_id_table[] = {
.name = "da850-async3-clksrc",
.driver_data = (kernel_ulong_t)da850_cfgchip_register_async3,
},
+ {
+ .name = "da830-usb-phy-clks",
+ .driver_data = (kernel_ulong_t)da8xx_cfgchip_register_usb_phy_clk,
+ },
{ }
};
--
2.7.4
More information about the linux-arm-kernel
mailing list